| 1501 - 1511 |
CO2-assisted polymer processing: A new alternative for intractable polymers
Garcia-Leiner M, Lesser AJ |
| 1512 - 1518 |
Study of complexes of poly(vinyl pyrrolidone) with copper and cobalt on solid state
Diaz E, Valenciano RB, Katime IA |
| 1519 - 1525 |
Kinetics of butylacrylate polymerization in a starved feed reactor
Cao GP, Zhu ZN, Zhang MH, Yuan WK |
| 1526 - 1530 |
Immobilization of invertase onto dimer acid-co-alkyl polyamine
Tumturk H, Tufan Y |
| 1531 - 1538 |
Development of a novel polymer-metal nanocomposite obtained through the route of in situ reduction for integral capacitor application
Pothukuchi S, Li Y, Wong CP |
| 1539 - 1545 |
Synthesis of poly(octadecyl acrylate-b-styrene-b-octadecyl acrylate) triblock copolymer by atom transfer radical polymerization
Zhu XL, Gu YR, Chen GJ, Cheng ZP, Lu JM |
| 1546 - 1552 |
Effect of diatomite/polyethylene glycol binary processing aids on the rheology of a metallocene linear low-density polyethylene
Liu XL, Li HL |
| 1553 - 1558 |
Studies on glass transition temperature of chitosan with four techniques
Dong YM, Ruan YH, Wang HW, Zhao YG, Bi DX |
| 1559 - 1566 |
Chemical structure designing to enhance the yield stress of electrorheological fluids based on modified chitosan compounds
Ko YG, Choi US, Sung BH |
| 1567 - 1576 |
Phase morphology and compatibilization mechanism in ternary polymer blend systems of polyethylene terephthalate, polyolefin rubber, and ionomer
Ohishi H |
| 1577 - 1583 |
Cationized milled pine bark as an adsorbent for orthophosphate anions
Tshabalala MA, Karthikeyan KG, Wang D |
| 1584 - 1590 |
Biaxially self-reinforced high-density polyethylene prepared by dynamic packing injection molding. I. Processing parameters and mechanical properties
Lei J, Jiang CD, Shen KZ |
| 1591 - 1596 |
Biaxially self-reinforced high-density polyethylene prepared by dynamic packing injection molding. II. Microstructure investigation
Lei J, Jiang CD, Shen KZ |
| 1597 - 1601 |
Synthesis and humidity sensitivity of conducting polyaniline in SBA-15
Li N, Li XT, Geng WC, Zhang T, Zuo Y, Qiu SL |
| 1602 - 1608 |
MoO2(acac)(2) immobilized on polymers as catalysts for cyclohexene epoxidation: Effect of the degree of crosslinking.
Reyes P, Borda G, Gnecco J, Rivas BL |
| 1609 - 1615 |
Modeling of ultrasonic processing
Roylance M, Player J, Zukas W, Roylance D |
| 1616 - 1622 |
Miscibility study of polymer blends composed of semirigid thermotropic liquid crystalline polycarbonate, poly(vinyl alcohol), and chitosan
Sato M, Koshino T, Kajitani Y, Inamura I, Kubo Y |
| 1623 - 1630 |
Rheological quantification of molecular parameters: Application to a hydrogen bond forming blend
Cai HJ, Ait-Kadi A, Brisson J |
| 1631 - 1637 |
Thermally stable conducting composites based on a carbon black-filled polyoxadiazole matrix
Souza FG, Sena ME, Soares BG |
| 1638 - 1646 |
Role of molecular weight of atactic poly(vinyl alcohol) (PVA) in the structure and properties of PVA nanofabric prepared by electrospinning
Lee JS, Choi KH, Do Ghim H, Kim SS, Chun DH, Kim HY, Lyoo WS |
| 1647 - 1659 |
Microwave-assisted and classical heating polycondensation reaction of bis(p-amido benzoic acid)-N-trimellitylimido-L-leucine with diisocyanates as a new method for preparation of optically active poly(amide imide)s
Mallakpour S, Rafiemanzelat F |
| 1660 - 1665 |
Highly grafted polystyrene-modified natural rubber as toughener for polystyrene
Neoh SB, Hashim AS |
| 1666 - 1672 |
Blends of poly(vinyl chloride) (PVC)/natural rubber-g(styrene-co-methyl methacrylate) for improved impact resistance of PVC
Arayapranee W, Prasassarakich P, Rempel GL |
| 1673 - 1680 |
Combination of bifunctional aldehydes and poly(vinyl alcohol) as the crosslinking systems to improve paper wet strength
Xu GG, Yang CQ, Deng YL |
| 1681 - 1686 |
Preparation and electrorheological characteristics of beta-cyclodextrin-epichlorohydrin-starch polymer suspensions
Gao ZW, Zhao XP |
| 1687 - 1697 |
Physical agglomeration behavior in preparation of cellulose-N-methyl morpholine N-oxide hydrate solutions by simple mixing
Kim DB, Jo SM, Lee WS, Pak JJ |
| 1698 - 1704 |
Microcellular thin PET sheet foam preparation by compression molding
Guan R, Wang BQ, Lu DP, Fang Q, Xiang BL |
| 1705 - 1710 |
Removal of concentrated heavy metal ions from aqueous solutions using polymers with enriched amidoxime groups
Kavakli PA, Guven G |
| 1711 - 1718 |
Porous polyimide films prepared by thermolysis of porogens with hyperbranched structure
Kim DW, Kang YK, Jin MY, Seok S, Won JC, Lee C, Yi J, Kim J, Kang J, Shin JS |
| 1719 - 1723 |
Preparation and properties of water-swellable elastomer
Zhang YH, He PX, Zou QC, He BQ |
| 1724 - 1730 |
Nonisothermal crystallization of metallocene propylene-decene-1 copolymers
Xu JT, Xue L, Fan ZQ |
| 1731 - 1735 |
Influence of alkali treatment on the structure of newcell fibers
Zhu YW, Ren YH, Wu CY |
| 1736 - 1742 |
Synthesis and structure of polysiloxane liquid crystalline elastomers with a mesogenic crosslinking agent
Jia YG, Zhang BY, Tian M, Pan W |
| 1743 - 1747 |
Weighting and improvement of silk properties
Ramadan AM, Mosleh S, Gawish SM |
| 1748 - 1755 |
Synthesis of superabsorbent polymers by irradiation and their applications in agriculture
Chen P, Zhang W, Luo W, Fang Y |
| 1756 - 1761 |
Crosslinking of natural and polybutadiene rubbers with thiuram sulfur donors in the presence of a thiuram monosulfide
Valentin JL, Rodriguez A, Marcos-Fernandez A, Gonzalez L |
| 1762 - 1768 |
Effects of calcium carbonate as the expanding inhibitor on the structural and mechanical properties of expanded starch/polyvinyl alcohol blends
Yang JH, Park J, Kim D, Lee D |
| 1769 - 1773 |
Formamide as the plasticizer for thermoplastic starch
Ma XF, Yu JG |
| 1774 - 1787 |
TTT-cure diagram of an anhydride-cured epoxy system including gelation, vitrification, curing kinetics model, and monitoring of the glass transition temperature
Teil H, Page SA, Michaud V, Manson JAE |
| 1788 - 1792 |
Ring-opening copolymerization of maleic anhydride with propylene oxide by double-metal cyanide
Hua ZJ, Qi GR, Chen S |
| 1793 - 1803 |
Sequence analysis and fiber properties of a blend of poly(ethylene terephthalate) and poly(ethylene terephthalate-co-4,4'-bibenzoate)
Min B, Kumar S, Hibbs MR, Ma HM, Collard DM, Schiraldi DA |
| 1804 - 1811 |
Tensile properties, morphology, and thermal behavior of PVC composites containing pine flour and bamboo flour
Ge XC, Li XH, Meng YZ |
| 1812 - 1815 |
Cocatalyst-originated aluminum residues in fibrous, very high molar mass polyethylene
Turunen JPJ, Haukka M, Pakkanen TT |
| 1816 - 1824 |
Encapsulation and controlled release in polyacrylamide hydrogels
Joseph M, Mathew T, Devipriya S, Kuriakose S |
| 1825 - 1836 |
Development of new eco-friendly options for cotton wet processing
Ibrahim NA, El-Hossamy M, Morsy MS, Eid BM |
| 1837 - 1845 |
Photocrosslinking of an ethylene-propylene-diene terpolymer and the characterization of its structure and mechanical properties
Wang WZ |
| 1846 - 1853 |
Synthesis and characterization of polyimides containing pyridine moiety
Hariharan R, Bhuvana S, Malbi MA, Sarojadevi M |
| 1854 - 1867 |
Potential and limits of dynamic mechanical analysis as a tool for fracture resistance evaluation of isotactic polypropylenes and their polyolefin blends
Grein C, Bernreitner K, Gahleitner M |
| 1868 - 1875 |
Characterization of konjac glucomannan-quaternized poly(4-vinyl-N-butyl) pyridine blend films and their preservation effect
Liu CH, Xiao CB |
| 1876 - 1885 |
Chitin characterization by SEM, FTIR, XRD, and C-13 cross polarization/mass angle spinning NMR
Cardenas G, Cabrera G, Taboada E, Miranda SP |
| 1886 - 1890 |
Influence of formulation variables and manufacturing process on propranolol extended release profile from HPMC matrices tablets
Huang YB, Tsai YH, Yang WC, Chang JS, Wu PC |
| 1891 - 1899 |
Effects of process conditions and mixing protocols on structure of extruded polypropylene nanocomposites
Zhu LJ, Xanthos M |
| 1900 - 1907 |
Using a water-soluble melamine-formaldehyde resin to improve the hardness of Norway spruce wood
Gindl W, Hansmann C, Gierlinger N, Schwanninger M, Hinterstoisser B, Jeronimidis G |
| 1908 - 1912 |
Degree of conversion of a copolymer of an experimental monomer and methyl methacrylate for dental applications
Viljanen EK, Skrifvars M, Vallittu PK |
| 1913 - 1922 |
Kinetics of the thermal decomposition of green alga Ulva by thermogravimetry
Carrasco F, Pages P |
| 1923 - 1927 |
The effect of alkyd resins on the properties of AA-NC semi-IPNs as binders in wood finish
Lu KT, Liu CT, Lin SM |
| 1928 - 1937 |
Numerical simulation of controlled nifedipine release from chitosan microgels
Li H, Yan GP, Wu SN, Wang ZJ, Lam KY |
| 1938 - 1945 |
Studies on dimensional stability and thermal properties of rubber wood chemically modified with styrene and glycidyl methacrylate
Devi RR, Maji TK, Banerjee AN |
| 1946 - 1950 |
Effect of temperature on aggregation/dissociation behavior of interpolymer complexes stabilized by hydrogen bonds
Khutoryanskiy VV, Nurkeeva ZS, Mun GA, Dubolazov AV |
| 1951 - 1956 |
Microindentation studies at the near surface of glassy polymers: Influence of molecular weight
Calleja FJB, Flores A, Michler GH |
| 1957 - 1963 |
Sorption equilibrium of Cr(VI) ions by strong base anion exchangers with pyridine structures
Neagu V, Untea I, Tudorache E, Orbeci C |
| 1964 - 1971 |
Effect of montmorillonite on the properties of thermosensitive poly(N-isopropylacrylamide) composite hydrogels
Bignotti F, Sartore L, Penco M, Ramorino G, Peroni I |
| 1972 - 1980 |
Sensitivity of surface free energy analysis methods to the contact angle changes attributed to the thickness effect in thin films
Abbasian A, Ghaffarian SR, Mohammadi N, Fallahi D |
| 1981 - 1988 |
Thermal and flame-retardant properties of polyester fabric grafted with polyanilines
Salgaonkar LP, Jayaram RV |
| 1989 - 2000 |
Study on poly(ethylene terephthalate)/polypropylene microfibrillar composites. II. Solid-state drawing behavior
Lin XD, Jia D, Leung FKP, Cheung WL |
