| 1347 - 1352 |
Preparation of an ultraviolet-curable water-borne poly(urethane acrylate)/silica its dispersion and properties of hybrid film
Yu H, Yuan QL, Wang DN, Zhao YH |
| 1353 - 1356 |
The theoretical estimation of effective spectral dimension for polymer melts
Kozlov GV, Dolbin IV, Zaikov GE |
| 1357 - 1364 |
Structure and properties of flame-sprayed poly(ethylene-co-vinyl alcohol) copolymer coatings
Oksuz M, Yildirim H |
| 1365 - 1369 |
Investigation of shear effects on styrene free radical polymerization using a narrow channel reactor
Leveson P, Dunk WAE, Jachuck RJ |
| 1370 - 1374 |
Degradation of polyimide film under vacuum ultraviolet irradiation
Peng GR, Hao WG, Yang DZ, He SY |
| 1375 - 1380 |
Characterization of the formation and degradation of a polyacrylamide microgel
Chen FG, Wang HJ, Zhu CF, Ren LL, Li J |
| 1381 - 1388 |
Crystalline morphology and isothermal crystallization kinetics of poly(ethylene terephthalate)/clay nanocomposites
Wan T, Chen L, Chua YC, Lu XH |
| 1389 - 1394 |
Influence of the preparation conditions on the morphology of polyaniline electrodeposited by the pulse galvanostatic method
Jiao SQ, Zhou HH, Chen JH, Luo SL, Kuang YF |
| 1395 - 1403 |
Effect of operation conditions in the pervaporation of ethanol-water mixtures with poly(1-trimethylsilyl-1-propyne) membranes
Gonzalez-Marcos JA, Lopez-Dehesa C, Gonzalez-Velasco JR |
| 1404 - 1410 |
Dynamic interfacial properties between a flexible-chain polymer and a thermotropic liquid crystalline polymer investigated by an ellipsoidal drop retraction method
Yu RB, Yu W, Zhou CX, Feng JJ |
| 1411 - 1419 |
Synthesis, characterization, and flocculation characteristics of hydrolyzed and unhydrolyzed polyacrylamide grafted xanthan gum
Adhikary P, Singh RP |
| 1420 - 1427 |
Controlled release of 2-methyl-4-chlorophenoxy acetic acid herbicide from waste gelatin-based blends and composites
Kandil S, Kenawy ER, El-Maghraby A, Elashry EH |
| 1428 - 1434 |
Effects of the combination of lubricants and short carbon fibers on the sliding performance of poly (ether imide) matrix composites
Xian GJ, Zhang Z |
| 1435 - 1439 |
Water stability of high-molecular-weight (HMW) syndiotacticity-rich poly(vinyl alcohol) (PVA)/HMW atactic PVA/iodine complex blend films
Yeum JH, Kwak JW, Han SS, Kim SS, Ji BC, Noh SK, Lyoo WS |
| 1440 - 1448 |
New polymer syntheses XXVIII. Synthesis and thermal behavior of new organometallic polyketones and copolyketones based on diferrocenylidenecyclohexanone
Aly KI |
| 1449 - 1455 |
Syndiospecific styrene polymerization with CpTiCl3/MAO: Effects of the order of reactant addition on polymerization and polymer properties
Huang B, Cao K, Li BG, Zhu SP |
| 1456 - 1460 |
Effects of polymeric emulsifiers on the properties of acrylic emulsion pressure-sensitive adhesives
Park MC, Lee MC |
| 1461 - 1465 |
Swelling behavior and pervaporation properties of new composite membrane systems: Porous polyethylene film-poly(acrylic acid) hydrogel
Buyanov AL, Revel'skaya LG, Rosova EY, Elyashevich GK |
| 1466 - 1472 |
Preparation of fluoroacrylate nanocopolymer by miniemulsion polymerization used in textile finishing
Huang PY, Chao YC, Liao YT |
| 1473 - 1479 |
The use of polymers in the treatment of produced oily waters
Feder AL, Gonzalez G, Teixeira CLS, Lucas EF |
| 1480 - 1488 |
The flocculation and rheological characteristics of hydrolyzed and unhydrolyzed grafted sodium alginate in aqueous solutions
Biswal DR, Singh RP |
| 1489 - 1495 |
Stem and bunch banana fibers from cultivation wastes: Effect of treatments on physico-chemical behavior
Ganan P, Cruz J, Garbizu S, Arbelaiz A, Mondragon M |
| 1496 - 1503 |
Grafting of natural rubber for preparation of natural rubber/unsaturated polyester resin miscible blends
Chuayjuljit S, Siridamrong P, Pimpan V |
| 1504 - 1510 |
Mechanical properties and morphological structures relationship of blends based on sulfated EPDM ionomer and polypropylene
Su ZP, Jiang PK, Li Q, Wei P, Wang GL, Zhang Y |
| 1511 - 1518 |
Effects of silane coupling agents on the vulcanization characteristics of natural rubber
Yan HX, Sun K, Zhang Y, Zhang YX, Fan YZ |
| 1519 - 1525 |
Graft copolymerization of methacrylamide onto acrylic fibers initiated by benzoyl peroxide
Celik M |
| 1526 - 1531 |
Preparation and determination of swelling behavior of poly(acrylamide-co-acrylic acid) hydrogels in water
Isik B, Kis M |
| 1532 - 1538 |
Synthesis and characterization of poly(glycidyl methacrylate)/Na-montmorillonite nanocomposites
Celik M, Onal M |
| 1539 - 1546 |
Mechanical properties of glass fiber and liquid crystalline polymer reinforced polypropylene hybrid composites toughened with elastomers
Tjong SC, Xu SA |
| 1547 - 1555 |
Methods to determine solubility parameters of polymers at high temperature using inverse gas chromatography
Huang JC |
| 1556 - 1561 |
Synthesis and characterization of a novel nitrogen-containing flame retardant
Hu XP, Li WY, Wang YZ |
| 1562 - 1568 |
Pervaporation of water/alcohol mixtures through chitosan/cellulose acetate composite hollow-fiber membranes
Tsai HA, Chen HC, Chou WL, Lee KR, Yang MC, Lai JY |
| 1569 - 1574 |
Novel sulfonated poly(ether ether ketone ketone) derived from bisphenol S
Li XF, Na H, Lu H |
| 1575 - 1585 |
Influence of mixing procedures and mica addition on properties of NR/BR vulcanizates. I
Castro DF, Suarez JCM, Nunes RCR, Visconte LLY |
| 1586 - 1589 |
Preparation and thermomechanical characterization of poly(vinyl chloride) blends compatible with terpolymer-containing maleic anhydride
Boztug A |
| 1590 - 1605 |
Mathematical simulation of dynamic coupled heat and liquid moisture transfer in multilayer anisotropic porous polymers
Li Y, Wang Z |
| 1606 - 1611 |
Carboxymethylation of Cassia occidentalis seed gum
Gupta S, Sharma P, Soni PL |
| 1612 - 1618 |
SiC microsphere derived from phenolic resin - Ethyl silicate heterogeneous precursors with carbothermic reduction
Narisawa M, Ukon H, Mabuchi H, Okamura K, Kurachi Y |
| 1619 - 1624 |
Swelling behavior of thermoreversible poly(N-isopropylacrylamide-co-N-vinylimidazole) hydrogels
Isik B, Gunay Y |
| 1625 - 1633 |
Applying Tikhonov regularization to process the kinetic data of polymerization
Yeow YL, Pradhana SI, Tan HCL, Leong YK |
| 1634 - 1642 |
Chitosan supported palladium catalyst. VI. Nitroaniline degradation
Vincent T, Peirano F, Guibal E |
| 1643 - 1648 |
Preparation of cadmium sulfide/poly(methyl methacrylate) composites by precipitation with compressed CO2
Li ZH, Zhang JL, Du JM, Mu TC, Liu ZM, Chen J, Han BX |
| 1649 - 1656 |
Recovery of heavy metals from aqueous solution by using radiation crosslinked poly(vinyl alcohol)
Hegazy ESA, El-Salmawy KM, El-Naggar AA |
| 1657 - 1661 |
Kinetic expression for the isothermal crystallization of poly(3-hydroxybutyrate)-11%poly(3-hydroxyvalerate)
Cyras VP, Rozsa C, Galego N, Vazquez A |
| 1662 - 1669 |
Free radical polymerization kinetics of monomers functionalized with -AsO(OH)(2) in aqueous media
Percino MJ, Chapela VM, Jimenez A |
| 1670 - 1675 |
Synthesis and properties of collagen/polylactic acid blends
Yang XQ, Yuan ML, Li W, Zhang GY |
| 1676 - 1689 |
Cure kinetics of epoxy/anhydride nanocomposite systems with added reactive flame retardants
Torre L, Lelli G, Kenny JM |
| 1690 - 1696 |
Preparation of linear low-density polyethylene by in situ copolymerization of ethylene with Zr supported on montmorillonite/Fe/methylaluminoxane catalyst system
Zhang ZC, Guo CY, Cui NN, Ke YC, Hu YL |
| 1697 - 1704 |
Mechanical and thermal properties of poly(lactic acid)/starch blends with dioctyl maleate
Zhang JF, Sun XZ |
| 1705 - 1709 |
X-ray photoelectron spectroscopy investigation into thermal degradation and stabilization of polyacrylonitrile fibers
Wu GP, Lu CX, Wu XP, Zhang SC, Fu H, Ling LC |
| 1710 - 1718 |
Study on molecular chain heterogeneity of linear low-density polyethylene by cross-fractionation of temperature rising elution fractionation and successive self-nucleation/annealing thermal fractionation
Jie K, Fan XD, Xie YC, Qiao WQ |
| 1719 - 1722 |
The effect of bimodality on the tear properties of filled silicone networks
Shah GB |
| 1723 - 1729 |
Aqueous polyurethane dispersions derived from polycarbonatediols
Lee DK, Tsai HB, Wang HH, Tsai RS |
| 1730 - 1736 |
Influence of the method of mixing on homogeneity and crystallization kinetics of blends of linear and branched polyethylene
Neway B, Gedde UW |
| 1737 - 1742 |
Separation of endocrine disruptors from aqueous solutions by pervaporation: Dioctylphthalate and butylated hydroxytoluene in mineral water
Higuchi A, Yoon BO, Kaneko T, Ham M, Maekawa M, Nohmi T |
| 1743 - 1751 |
Preparation and properties of waterborne poly(urethane urea)s for adhesives: The effects of the 2,2-bis(hydroxylmethyl)propionic acid content on the properties
Kwak YS, Kim EY, Yoo BH, Kim HD |
| 1752 - 1758 |
Simple chemical polvmerization method for the deposition of a conducting polyaniline on the surface of acrylonitrile-butadiene-styrene. II. Treatment in organic free solvent
Matveeva E, Carrascosa RE, Palomino RJM, Parkhutik V |
| 1759 - 1762 |
Viscosity/molecular-weight relationship for gamma-(2,3-dihydroxypropoxy)propyl-terminated poly(dimethylsiloxane)s
Feng SY, Jie Z, Wang D, Wu MY, Yu ZT |
| 1763 - 1770 |
Use of a sodium ionomer as a compatibilizer in polypropylene/high-barrier ethylene-vinyl alcohol copolymer blends: The processability of the blends and their physical properties
Abad MJ, Ares A, Barral L, Cano J, Diez FJ, Garcia-Garabal S, Lopez J, Ramirez C |
| 1771 - 1779 |
Synthesis and analytical application of a chelating resin based on a crosslinked styrene/maleic acid copolymer for the extraction of trace-metal ions
Roy PK, Rawat AS, Choudhary V, Rai PK |
| 1780 - 1788 |
Mechanical poly(amide and thermal properties of ceramic-modified imide)
Park YW, Lee DS |
| 1789 - 1796 |
Synthesis and characterization of diblock, triblock, and multiblock copolymers containing poly(3-hydroxy butyrate) units
Arslan H, Mentes A, Hazer B |
| 1797 - 1802 |
Poly(oxyethylene)diamine-derived hydrophilic copolymers for emulsifying diglycidylether of bisphenol-A
Lin JJ, Chen SM, Hu SS |
| 1803 - 1814 |
Performance of crystallization analysis fractionation and preparative fractionation on the characterization of gamma-irradiated low-density polyethylene
Vilaplana F, Morera-Escrich V, del Hierro-Navarro P, Monrabal B, Ribes-Greus A |
| 1815 - 1826 |
Evaluation of the water sorption and controlled-release potential of binary polymeric beads of starch and alginate loaded with potassium nitrate as an agrochemical
Mishra S, Bajpai J, Bajpai AK |
| 1827 - 1840 |
Computer simulation and comparative study on the pervaporation separation characteristics of sodium alginate and its blend membranes with poly(vinyl alcohol) to separate aqueous mixtures of 1,4-dioxane or tetrahydrofuran
Aminabhavi TM, Naidu BVK, Sridhar S |
| 1841 - 1852 |
Poly(propylene)/poly(ethylene terephthalate-co-isophthalate) blends and glass bead filled composites: Microstructure and thermomechanical properties
Arencon D, Velasco JI, Rodriguez-Perez MA, de Saja JA |
| 1853 - 1853 |
Regioregular poly(3-alkylthiophenes): Synthesis, characterization, and application in conductive fabrics (vol 93, pg 2131, 2004)
Daoud WA, Xin JH |
