| 2489 - 2495 |
Aldehyde Functionalized Cellulose Support for Hydrogels
Wang YH, Hsieh YL |
| 2496 - 2501 |
Synthesis and Characterization of Schiff-Base-Containing Polyimides
Ghaemy M, Mighani H |
| 2502 - 2511 |
Synthesis and Characterization of PNIPAM/PS Core/Shell Particles
Zhang L, Daniels ES, Dimonie VL, Klein A |
| 2512 - 2520 |
Electrical and Thermal Conductivity and Tensile and Flexural Properties of Carbon Nanotube/Polycarbonate Resins
King JA, Via MD, Caspary JA, Jubinski MM, Miskioglu I, Mills OP, Bogucki GR |
| 2521 - 2529 |
Preparation, Characterization, and Property Testing of Condensation-Type Silicone/Montmorillonite Nanocomposites
Voulomenou A, Tarantili PA |
| 2530 - 2540 |
Residual Stress and Viscoelastic Deformation of Film Insert Molded Automotive Parts
Kim SY, Kim SH, Oh HJ, Lee SH, Youn JR |
| 2541 - 2552 |
Surface Modification of Aramid Fibers with New Chemical Method for Improving Interfacial Bonding Strength with Epoxy Resin
Liu TM, Zheng YS, Hu J |
| 2553 - 2561 |
Evolution of Fiber Morphology During Electrospinning
Fang JA, Wang HX, Niu HT, Lin T, Wang XG |
| 2562 - 2571 |
In Situ Photopolymerization of PEGDA-Protein Hydrogels on Nanotube Surfaces
Smoak EM, Henricus MM, Banerjee IA |
| 2572 - 2581 |
Intermolecular Interaction in Aqueous Solution of Binary Blends of Poly(acrylamide) and Poly(ethylene glycol)
Lu T, Shan GR, Shang SM |
| 2582 - 2591 |
Synthesis and Characterization of an Organic Soluble and Conducting Polyaniline-Grafted Multiwalled Carbon Nanotube Core-Shell Nanocomposites by Emulsion Polymerization
Xu J, Yao P, Liu LT, Jiang ZY, He F, Li M, Zou JY |
| 2592 - 2600 |
Flocculation Performance of Modified Chitosan in an Aqueous Suspension
Ali SA, Pal S, Singh RP |
| 2601 - 2612 |
Effect of Iron Carboxylates on the Photodegradability of Polypropylene. I. Natural Weathering Studies
Rajakumar K, Sarasvathy V, Thamaraichelvan A, Chitra R, Vijayakumar CT |
| 2613 - 2623 |
Metallic Oxides as Fire Retardants and Smoke Suppressants in Flexible Poly(Vinyl Chloride)
Rodolfo A, Mei LHI |
| 2624 - 2633 |
Influence of Azobenzene Units on Imidization Kinetic of Novel Poly(ester amic acid)s and Polymers Properties Before and After Cyclodehydration
Schab-Balcerzak E, Janeczek H, Kucharski P |
| 2634 - 2641 |
Effects of the Content of Silane Coupling Agent KH-560 on the Properties of LLDPE/Magnesium Hydroxide Composites
Yang Z, Cai J, Zhou CG, Zhou D, Chen BF, Yang H, Cheng RS |
| 2642 - 2649 |
Gelatin Based pH-Sensitive Hydrogels for Colon-Specific Oral Drug Delivery: Synthesis, Characterization, and In Vitro Release Study
Raafat AI |
| 2650 - 2658 |
Synthesis of Star-Shaped Poly(epsilon-caprolactone)-b-poly(L-lactide) Copolymers: From Star Architectures to Crystalline Morphologies
Ren J, Zhang ZH, Feng Y, Li JB, Yuan WZ |
| 2659 - 2667 |
The Effect of Pigments on the Stability of Silicone/Montmorillonite Prosthetic Nanocomposites
Vasilakos SP, Tarantili PA |
| 2668 - 2673 |
Effect of Fiber Orientation on Pore Size Characteristics of Nonwoven Structures
Rawal A, Rao PVK, Russell S, Jeganathan A |
| 2674 - 2681 |
Ultrafine Particles of Bismuth(III) Compounds in the Phase of Crosslinked Polymers: Precursors for New Sorbents and Catalysts
Gutsanu V, Cojocaru L, Lisa G, Volodina GF |
| 2682 - 2689 |
Experimental Investigation of the Governing Parameters in the Electrospinning of Poly(3-hydroxybutyrate) Scaffolds: Structural Characteristics of the Pores
Tehrani AH, Zadhoush A, Karbasi S, Khorasani SN |
| 2690 - 2695 |
High Dispersion Ability of Fluorene-Based Polyester as a Polymer Matrix for Carbon Nanotubes
Kawasaki S, Yamada M, Kobori K, Jin FZ, Takata T |
| 2696 - 2703 |
Preparation and Characterization of Porous Poly(vinylidene fluoride) Membranes for Dehumidification with Poly(ethylene glycol) as an Additive
Pei LX, Zhao WJ, Zhang LZ |
| 2704 - 2711 |
Didecyl Ester of 4-Sulfophthalic Acid as a Plast Dopant and Emulsifier in the Chemical Polymerization of Aniline into Polyaniline Salt
Palaniappan S, Ajit S |
| 2712 - 2721 |
Oxidized Multiwalled Carbon Nanotubes as Effective Reinforcement and Thermal Stability Agents of Poly(lactic acid) Ligaments
Chrissafis K, Paraskevopoulos KM, Jannakoudakis A, Beslikas T, Bikiaris D |
| 2722 - 2727 |
Effect of Boron-Containing Materials on the Flammability and Thermal Degradation of Polyamide 6 Composites Containing Melamine
Dogan M, Bayramli E |
| 2728 - 2735 |
Removal of Basic Dyes from Aqueous Medium Using Novel Poly(MAA)-Cross Linked Pregelled Starch Graft Copolymer
Mostafa KM, Samarkandy AR, El-Sanabary AA |
| 2736 - 2742 |
Pigment Dyeing of Polyamide-Epichlorohydrin Cationized Cotton Fabrics
Fang KJ, Zhang LB, Xu Y, Zhang X |
| 2743 - 2753 |
Improvement in Voltage, Thermal, Mechanical Stability and Ion Transport Properties in Polymer-Clay Nanocomposites
Sharma AL, Thakur AK |
| 2754 - 2764 |
Study on the Properties of the Epoxy-Matrix Composites Filled with Thermally Conductive AlN and BN Ceramic Particles
Zhu BL, Ma J, Wu J, Yung KC, Xie CS |
| 2765 - 2771 |
Study on the Properties of Magnetorheological Gel Based on Polyurethane
Wei B, Gong XL, Jiang WQ, Qin LJ, Fan YC |
| 2772 - 2777 |
Study on Morphology Control and How to Affect Mechanical Properties of Polyimide/Silica Hybrid Films
Qin JQ, Li Z, Gu Y |
| 2778 - 2790 |
Thermal and Mechanical Properties of Compression-Molded pMDI-Reinforced PCL/Gluten Composites
Mohamed A, Finkenstadt VL, Gordon SH, Palmquist DE |
| 2791 - 2800 |
Study on Degradation Reactions in Polyethylene Terephthalate Containing 5-sulpho Isophthalyl Moieties
Nayak S, Labde J, Geedh S, Jaisingh SK, Rao K, Venkatachalam S, Kelkar AK |
| 2801 - 2809 |
Acid-Synergized Grafting of Sodium Styrene Sulfonate onto Electron Beam Irradiated-Poly(vinylidene fluoride) Films for Preparation of Fuel Cell Membrane
Nasef MM, Saidi H, Dahlan KZM |
| 2810 - 2820 |
The Effect of Maleated Polylactic Acid (PLA) as an Interfacial Modifier in PLA-Talc Composites
Fowlks AC, Narayan R |
| 2821 - 2832 |
Synthesis and Characterization of Zwitterionic Organogels Based on Schiff Base Chemistry
Tarannum N, Singh M |
| 2833 - 2840 |
Optical and Thermo Electrical Properties of ZnO Nano Particle Filled Polystyrene
Gaur MS, Singh PK, Chauhan RS |
| 2841 - 2848 |
Investigation on the Use of Coir Fiber as Alternative Reinforcement in Polypropylene
Bettini SHP, Bicudo ABLC, Augusto IS, Antunes LA, Morassi PL, Condotta R, Bonse BC |
| 2849 - 2858 |
Water-Soluble Copolymers from Functionalized Monomers (sodium o- and p-methacryloylaminophenylarsonate): Synthesis and Characterization
Yanez-Martinez BA, Percino J, Chapela VM |
| 2859 - 2868 |
Nanofibers as Carrier Systems for Antimicrobial Microemulsions. II. Release Characteristics and Antimicrobial Activity
Kriegel C, Kit KM, McClements DJ, Weiss J |
| 2869 - 2880 |
Influence of Phenoxy Addition on the Curing Kinetics for Uncatalyzed and Catalyzed Cyanate Ester Resin
Remiro PM, De La Caba K, Mondragon I, Riccardi CC |
| 2881 - 2889 |
The Effect of Different Modified Multiwalled Carbon Nanotubes on Tribological Behaviors of Poly(furfuryl alcohol) Composite Coatings
Men XH, Zhang ZZ, Yang J, Wang K, Pang W |
| 2890 - 2897 |
Properties Improvement of PMMA Using Nano TiO2
Chatterjee A |
| 2898 - 2903 |
A New Crystallization Kinetics Study of Polycarbonate Under High-Pressure Carbon Dioxide and Various Crystallinization Temperatures by Using Magnetic Suspension Balance
Li G, Park CB |
| 2904 - 2913 |
Functional Copolymer/Organo-MMT Nanoarchitectures. II. Dynamic Mechanical Behavior of Poly(MA-co-BMA)s-organo-MMT Clay Nanocomposites
Rzayev ZMO, Guner A, Soylemez EA, Kavlak S |
| 2914 - 2920 |
Influence of the Recycled Glass Fibers from Nonmetals of Waste Printed Circuit Boards on Properties and Reinforcing Mechanism of Polypropylene Composites
Zheng YH, Shen ZG, Ma SL, Cai CJ, Zhao XH, Xing YS, Guo BH, Zeng XM, Wang LC |
| 2921 - 2928 |
A Promising Bioelectrode Based on Gene of Mycobacterium leprae Immobilized onto Poly(4-aminophenol)
Afonso AS, Goulart LR, Goulart IMB, Machado AEH, Madurro JM, Brito-Madurro AG |
| 2929 - 2938 |
Synthesis and Properties of Poly(butylene terephthalate)/Multiwalled Carbon Nanotube Nanocomposites Prepared by In Situ Polymerization and In Situ Compatibilization
Wu FJ, Yang GS |
| 2939 - 2950 |
Cellulose as a Renewable Resource for the Synthesis of Wood Consolidants
Cipriani G, Salvini A, Baglioni P, Bucciarelli E |
| 2951 - 2958 |
Synthesis and Solution Properties of Amphiphilic Cyclopolymers and Terpolymers of 4-Methoxycarbonyl-1, 1-diallylpiperidinium Chloride, Diallyloctadecylammonium Chloride, and Sulfur Dioxide
Ali SA, Al-Muallem HA, Abu-Thabit NY |
| 2959 - 2968 |
High-Optical Transparency and Low-Dielectric Constant of New Organosoluble Polyamides Containing Trifluoromethyl and Xanthene Groups
Ma CX, Sheng SR, Wei MH, He W, Song CS |
| 2969 - 2975 |
Development and Characterization of a Gelatin-Based Coating with Unique Sealing Properties
Farris S, Cozzolino CA, Introzzi L, Piergiovanni L |
| 2976 - 2980 |
Effect of Nano-TiO2 Dispersion on PEO Polymer Electrolyte Property
Singh PK, Bhattacharya B, Nagarale RK |
| 2981 - 2988 |
Self-Oscillating pH-Responsive Cryogels as Possible Candidates of Soft Materials for Generating Mechanical Energy
Bilici C, Karayel S, Demir TT, Okay O |
| 2989 - 2997 |
Semi-IPN Carrageenan-Based Nanocomposite Hydrogels: Synthesis and Swelling Behavior
Mahdavinia GR, Marandi GB, Pourjavadi A, Kiani G |
| 2998 - 3004 |
Preparation and Properties of Biocomposites Composed of Glycerol-Based Epoxy Resins, Tannic Acid, and Wood Flour
Shibata M, Teramoto N, Takada Y, Yoshihara S |
| 3005 - 3012 |
Effect of Nonsolvent on Morphologies of Polyamide 6 Electrospun Fibers
Wei W, Yeh JT, Li P, Li MR, Li W, Wang XL |
| 3013 - 3023 |
Polymer Nanocomposite Membranes Based on Sulfonated Poly(ether ether ketone) and Trisilanol Phenyl POSS for Fuel Cell Applications
Chhabra P, Choudhary V |
| 3024 - 3033 |
Improved Surface Wettability of Polyurethane Films by Ultraviolet Ozone Treatment
Kuang P, Lee JH, Kim CH, Ho KM, Constant K |
| 3034 - 3040 |
Flammability and Mechanical Properties of Al(OH)(3) and BaSO4 Filled Polypropylene
Tan S, Tincer T |
| 3041 - 3048 |
Effect of Solid State Grinding on Properties of PP/PET Blends and Their Composites with Carbon Nanotubes
Koysuren O, Yesil S, Bayram G |
| 3049 - 3057 |
Electrochemical Synthesis of Poly(methylsilyne) and Investigation of the Effects of Parameters on the Synthesis
Eroglu D, Nur Y, Bayram G, Toppare LK |
| 3058 - 3065 |
Effect of Rapid Mold Surface Inducting Heating on the Replication Ability of Microinjection Molding Light-Guided Plates with V-grooved Microfeatures
Huang MS, Yu JC, Lin YZ |
| 3066 - 3073 |
Glycolytic Depolymerization of PET Waste in a Microwave Reactor
Achilias DS, Redhwi HH, Siddiqui MN, Nikolaidis AK, Bikiaris DN, Karayannidis GP |
| 3074 - 3081 |
Influence of Filler and Cure Systems on Thermal Aging Resistance of Natural Rubber Vulcanizates Under Strained Condition
Choi SS, Jose J, Lyu MY, Huh YI, Cho BH, Nah C |
| 3082 - 3088 |
Oxidized Pea Starch/Chitosan Composite Films: Structural Characterization and Properties
Wu HX, Liu CH, Chen JG, Chen Y, Anderson DP, Chang PR |
| 3089 - 3101 |
Stress Cracking and Chemical Degradation of Poly(ethylene terephthalate) in NaOH Aqueous Solutions
Teofilo ET, Silva SML, Rabello MS |
| 3102 - 3110 |
Three-Layer Sheets Based on Gelatin and Poly(lactic acid), Part 1: Preparation and Properties
Martucci JF, Ruseckaite RA |
