| 1095 - 1099 |
Preparation and characterization of soy protein isolate-carboxymethylated konjac glucomannan blend films
Tang RP, Du YM, Zheng H, Fan LH |
| 1100 - 1110 |
Effect of solvent on properties of solution-cast dense SPPO films
Kruczek B, Matsuura T |
| 1111 - 1114 |
Synthesis and characterization of a novel phthalazinone poly(aryl ether sulfone ketone) with carboxyl group
Xuan YN, Gao Y, Huang Y, Jian XG |
| 1115 - 1120 |
Structural properties of CrF3- and MnCl2-filled poly(vinyl alcohol) films
Zidan HM |
| 1121 - 1128 |
Polycondensation of sodium tetrazodiphenyl naphthionate and pyromellitic dianhydride under microwave irradiation and the performance of the third-order nonlinear optics
Tang XB, Lu JM, Zhang ZB, Zhu XL, Wang LH, Li NJ, Sun ZR |
| 1129 - 1137 |
Antimicrobial protection of cotton and cotton/polyester fabrics by radiation and thermal treatments. I. Effect of ZnO formulation on the mechanical and dyeing properties
El-Naggar AM, Zohdy MH, Hassan MS, Khalil EM |
| 1138 - 1144 |
Study on the structure of nylon 6 films iodinated before forming. I. Comparison with the film iodinated after forming
Kang YA, Lee YH |
| 1145 - 1152 |
Bottom design of carbonated soft drink poly(ethylene terephthalate) bottle to prevent solvent cracking
Lyu MY, Pae Y |
| 1153 - 1161 |
Immobilization of lipase on a polymeric microsphere with an epoxy group prepared by radiation-induced polymerization
Choi SH, Lee KP, Kang HD |
| 1162 - 1169 |
Mathematical model of charge and density distributions in interfacial polymerization of thin films
Freger V, Srebnik S |
| 1170 - 1179 |
Improved methods for evaluating the molar mass distributions of cellulose in Kraft pulp
Berggren R, Berthold F, Sjoholm E, Lindstrom M |
| 1180 - 1185 |
Preparation and property of poly(ethylene terephthalate) fibers providing ultraviolet radiation protection
Teng CQ, Yu MH |
| 1186 - 1195 |
Photoinitiation systems and thermal decomposition of photodefinable sacrificial materials
Wu XQ, Reed HA, Rhodes LF, Elce E, Ravikiran R, Shick RA, Henderson CL, Allen SAB, Kohl PA |
| 1196 - 1202 |
Mechanical properties of a cryogenically mechanically alloyed polycarbonate-poly(aryl ether ether ketone) system
Martin JP, Kander RG |
| 1203 - 1210 |
Synthesis and properties of new polyurethane ionomers. I. Photosensitive cationomers with triazene units
Buruiana EC, Niculescu V, Buruiana T |
| 1211 - 1217 |
Structural investigations of acrylonitrile-vinyl acid copolymers by NMR Spectroscopy
Bajaj P, Sreekumar TV, Sen K, Kumar R, Brar AS |
| 1218 - 1224 |
Electrochemical polymerization of azure A and properties of poly(azure A)
Chen CX, Mu SL |
| 1225 - 1229 |
Stretchable conductive fabric for electrotherapy
Oh KW, Park HJ, Kim SH |
| 1230 - 1235 |
Preparation and metal ion adsorption properties of the resin containing sulfonic acid groups
Rivas BL, Ruf B |
| 1236 - 1241 |
Preparation and properties of water-soluble polyester surfactants. III. Preparation and wetting properties of polyethylene glycol-polydimethylsiloxane polyester Surfactants
Liu HJ, Lin LH, Chen KM |
| 1242 - 1251 |
Thermal and viscoelastic properties of some commercial starch products
Contat-Rodrigo L, Ribes-Greus A |
| 1252 - 1257 |
New process for the production of dry hexamethylenediammonium adipate
Papaspyrides CD, Vouyiouka SN, Bletsos IV |
| 1258 - 1267 |
Analysis and modeling of PVTX diagram of an unsaturated polyester resin, thermoplastic additive, and mineral fillers blend
Boyard N, Vayer M, Sinturel C, Erre R, Delaunay D |
| 1268 - 1278 |
Production and properties of highly oriented polyoxymethylene by die-drawing
Taraiya AK, Mirza MS, Mohanraj J, Barton DC, Ward IM |
| 1279 - 1288 |
Release of ibuprofen from poly(epsilon-caprolactone-co-D,L-lactide) and simulation of the release
Ahola N, Rich J, Karjalainen T, Seppala J |
| 1289 - 1295 |
Enhancement of the high-temperature utility of a polystyrene-b-poly(ethylene-co-butylene)-b-polystyrene block copolymer by Friedel-Crafts naphthoylation
Jones AS, Wright T, Smook MA, Harwood HJ |
| 1296 - 1303 |
Phase dispersion-crosslinking synergism in binary blends of poly(vinyl chloride) with low-density polyethylene: Entrapping phenomenon in PVC/LDPE/DCP blend
Ma GW, Fang ZP, Xu CW |
| 1304 - 1310 |
Effects of NCO/OH molar ratio on miscibility and properties of semiinterpenetrating polymer networks from polyurethane and benzyl konjac glucomannan
Lu YS, Zhang L |
| 1311 - 1319 |
Isothermal and nonisothermal crystallization kinetics of partially melting nylon 10 12
Li YJ, Zhang GS, Zhu XY, Yan DY |
| 1320 - 1327 |
Size control of poly(2-oxy-6-naphthoyl) whiskers by the addition of oligomers during polymerization
Sarker AK, Kimura K, Yamashita Y |
| 1328 - 1335 |
Surface morphology and nodule formation mechanism of cellulose acetate membranes by atomic force microscopy
Zeng YM, Wang ZG, Wan LJ, Shi YQ, Chen GW, Bai CL |
| 1336 - 1345 |
Fracture behavior of die-drawn toughened polypropylenes
Mohanraj J, Chapleau N, Ajji A, Duckett RA, Ward IM |
| 1346 - 1349 |
Thermal properties of poly(vinyl alcohol)/poly(diallyldi-methylammonium chloride) interpenetrating polymer networks
Kim SJ, Yoon SG, Lee YM, Kim IY, Kim SI |
| 1350 - 1356 |
Synthesis and characterization of novel soluble alternating copoly(phenylene vinylene) derivative for light-emitting electrochemical cell
Xiang D, Shen QD, Zhang SY, Jiang X |
| 1357 - 1365 |
Structural development of poly(ethylene 2,6-naphthalene dicarboxylate) film upon solvent drawing
Kang YA, Kim KH, Lee YH, Lee JO, Cho HH |
| 1366 - 1375 |
Interaction of crosslinked ethylene-propylene-diene terpolymer blends with chlorinated organic penetrants
Siddaramaiah, Roopa S, Guruprasad KH |
| 1376 - 1383 |
Rheology of poly(n-butyl methacrylate) and its composites with calcium carbonate
Chen JD, Carrot C, Chalamet Y, Majeste JC, Taha M |
| 1384 - 1392 |
Process-structure-property relationship in ternary short-glass-fiber/elastomer/polypropylene composites
Tjong SC, Xu SA, Mai YW |
| 1393 - 1398 |
Molecular weight and spinnability of polyacrylonitrile produced by precipitation polymerization in supercritical CO2
Teng XR |
