| 2339 - 2346 |
Development of potentially biodegradable polyamide-6 and polyvinyl alcohol blends: Physico-mechanical properties, thermal properties, and soil test
Ramaraj B, Poomalai P |
| 2347 - 2354 |
Flame-retardant effect of polyaniline coating deposited on cellulose fibers
Stejskal J, Trchova M, Sapurina I |
| 2355 - 2364 |
Effect of processing conditions on the structure and properties of polypropylene spunbond fabrics
Nanjundappa R, Bhat GS |
| 2365 - 2368 |
Thermodynamic interactions of a copolyester of bisphenol A with terephthalic acid and isophthalic acid with some solvents
Sakar D, Cankurtaran O, Karaman FY |
| 2369 - 2372 |
Study on surface fluorinating for reducing attenuation of polymethyl methacrylate polymer optic fiber
Chu JR, Zhong LS, Wen XM, Xu CX |
| 2373 - 2379 |
Properties and application of novel amphoteric polypropylene fabrics
Mosleh S, Gawish SM, Khalil FH, Bieniek RF |
| 2380 - 2393 |
Tensile mechanical properties of sulfonated poly(ether ether ketone) (SPEEK) and BPO4/SPEEK membranes
Reyna-Valencia A, Kaliaguine S, Bousmina M |
| 2394 - 2401 |
New polymer synthesis. XXX. Synthesis and thermal behavior of new organometallic polyketones and copolyketones based on diferrocenylidenecycloheptanone
Aly KI, Monem MIA |
| 2402 - 2413 |
Synthesis and characterization of magnetorheological polyimide gels
Fuchs A, Hu B, Gordaninejad F, Evrensel C |
| 2414 - 2421 |
Effect of PEG additives on properties and morphologies of membranes prepared from poly(2,6-dimethyl-1,4-phenylene oxide) by benzyl bromination and in situ amination
Tang BB, Wu D, Xu TW |
| 2422 - 2426 |
Use of Fourier transform infrared and second derivative ultraviolet spectrometry in determining polystyrene-poly(4-vinylpyridine) blend composition
Meal L |
| 2427 - 2439 |
Process efficiency and long-term performance of alpha-tocopherol in film-blown linear low-density polyethylene
Strandberg C, Albertsson AC |
| 2440 - 2449 |
Polymers, composites, and characterization of conducting polyfuran and poly(2-bromoaniline)
Gok A, Sari B, Talu M |
| 2450 - 2453 |
Dissolution of condensed tannin with phenol: Optimum reaction parameters and some flow properties
Samil A, Alma MH, Acemioglu B |
| 2454 - 2460 |
The dynamic mechanical properties of EPDM/Al(OH)(3) composites
Gao NK, Li JY, Li ST, Peng ZR |
| 2461 - 2466 |
Synthesis of glycidyl amine adducts and their copolymerization with glycidyl methacrylate
Gawdzik B, Kovtun O |
| 2467 - 2472 |
Thermal decomposition kinetics of thermotropic liquid crystalline polyesterimides
Chi ZG, Yao XD, Zhang Y, Xu JR |
| 2473 - 2480 |
Characterization of the skin orientation of thermotropic liquid-crystalline copolyester moldings with near-edge X-ray absorption fine structure
Bubeck RA, Thomas LS, Rendon S, Burghardt WR, Hexemer A, Fischer DA |
| 2481 - 2486 |
Preparation of a new type of ion-exchange membrane based on sulfonated poly(ether ether ketone ketone)s
Li XF, Zhao CJ, Lu H, Wang Z, Jiang W, Na H |
| 2487 - 2492 |
Thermal degradation behaviors of polypropylene with novel silicon-containing intumescent flame retardant
Li Q, Zhong HF, Wei P, Jiang PK |
| 2493 - 2507 |
Deswelling stresses and reduced swelling of superabsorbent polymer in composites of fiber and superabsorbent polymers
Buchholz FL, Pesce SR, Powell CL |
| 2508 - 2513 |
Preparation and evaluation of a dispersant for gypsum paste from acid hydrolysis lignin
Matsushita Y, Imai M, Tamura T, Fukushima K |
| 2514 - 2520 |
Effect of ionic content, solid content, degree of neutralization, and chain extension on aqueous polyurethane dispersions prepared by prepolymer method
Nanda AK, Wicks DA, Madbouly SA, Otaigbe JU |
| 2521 - 2531 |
Morphology and thermo-mechanical properties of compatibilized polyimide-silica nanocomposites
Al-Kandary S, Ali AAM, Ahmad Z |
| 2532 - 2538 |
Enhancement of radiation-resistant effect in ethylene-vinyl acetate copolymers by the formation of ethylene-vinyl acetate copolymers/clay nanocomposites
Zhang WA, Fang YE |
| 2539 - 2543 |
Effect of electron donors on 1,3-butadiene polymerization by a Ziegler-Natta catalyst based on neodymium
Coutinho FMB, Rocha TCJ, Mello IL, Nunes DSS, Soares BG, Costa MAS |
| 2544 - 2549 |
Water absorption in epoxy resins: The effects of the crosslinking agent and curing temperature
Abdelkader AF, White JR |
| 2550 - 2554 |
Glucose oxidase electrodes based on microstructured polypyrrole films
Ma MM, Qu LT, Shi GQ |
| 2555 - 2562 |
Crosslinking structures and dyeing kinetics of cotton cellulose treated with a steeped process
Chen HE, Chen JC, Yao WH, Tsou CH, Chen CC |
| 2563 - 2571 |
Mechanical and flame-retarding properties of styrene-butadiene rubber filled with nano-CaCo3 as a filler and linseed oil as an extender
Mishra S, Shimpi NG |
| 2572 - 2577 |
Interaction of microcrystalline chitosan with Ni(II) and Mn(II) ions in aqueous solution
Bodek KH, Kufelnicki A |
