| V - V |
Transition between transient and steady-state wear in the sliding of poly(phenylene sulfide) against a tool steel counterface (vol 69, pg 1099, 1998)
Yu LG, Liu WM, Xue QJ |
| V - V |
Effect of various inorganic fillers on the friction and wear behaviors of polyphenylene sulfide (vol 68, pg 1643, 1998)
Yu LG, Liu WM, Xue QJ |
| 1097 - 1115 |
Polyacrylic acid (Poly-A) as a chelant and dispersant
Kuila D, Blay GA, Borjas RE, Hughes S, Maddox P, Rice K, Stansbury W, Laurel N |
| 1117 - 1130 |
Preparation, structure, and transport properties of ultrafiltration membranes of poly(vinyl chloride) (PVC), carboxylated poly(vinyl chloride) (CPVC), and PVC CPVC blends
Babu PR, Gaikar VG |
| 1131 - 1137 |
Water sorption in amorphous poly(ethylene terephthalate)
Launay A, Thominette F, Verdu J |
| 1139 - 1143 |
Mechanism studies on the catalytic degradation of waste polystyrene into styrene in the presence of metal powders
Xi GX, Rui L, Tang QH, Li JH |
| 1145 - 1151 |
Preferential separation of ethanol from aqueous solution through hydrophilic polymer membranes
Wang XP, Shen ZQ, Zhang FY, Zhang YF |
| 1153 - 1160 |
Copolymerization of 4-chlorophenyl acrylate with methyl acrylate: Synthesis, characterization, reactivity ratios, and their applications in the leather industry
Thamizharasi S, Srinivas G, Sulochana N, Reddy BSR |
| 1161 - 1164 |
Surface graft copolymerization of acrylic acid onto corona-treated poly(ethylene terephthalate) fabric
Guo YH, Zhang JC, Shi MW |
| 1165 - 1169 |
Effect of stearic acid concentration on the reversion behavior of epoxidized natural rubber
Poh BT, Kasmuri MB |
| 1171 - 1179 |
New chitin-based polymer hybrids, 4: Soil burial degradation behavior of poly(vinyl alcohol)/chitin derivative miscible blends
Takasu A, Aoi K, Tsuchiya M, Okada M |
| 1181 - 1190 |
Blends of poly(hydroxyether of bisphenol A) and polycarbonate: In situ polymerization preparation, miscibility, and transreaction
Zheng SX, Guo QP, Mi YL, Chan CM |
| 1191 - 1195 |
Relationship between physical properties and chemical structures of poly(ethylene terephthalate-co-ethylene isophthalate)
Yu JY, Li BZ, Lee SW, Ree MH |
| 1197 - 1203 |
The process to make a ridge- and fringe-field multidomain structure using a photoimageable polymer for a wide viewing angle liquid crystal display application
Cai C, Nunes R, Lien A, Galligan E, Levon K |
| 1205 - 1214 |
Instrumented tensile and falling weight impact response of injection-molded alpha- and beta-phase polypropylene homopolymers with various melt flow indices
Karger-Kocsis J, Mouzakis DE, Ehrenstein GW, Varga J |
| 1215 - 1222 |
Structure and properties of melt-extruded LaRC-IA (3,4 '-ODA 4,4 '-ODPA) polyimide fibers
Dorsey KD, Desai P, Abhiraman AS, Hinkley JA, St Clair TL |
| 1223 - 1230 |
Metal ion imprinted microsphere prepared by surface molecular imprinting technique using water-in-oil-in-water emulsions
Yoshida M, Uezu K, Goto M, Furusaki S |
| 1231 - 1238 |
Synthesis, characterization, thermal and flame-retardant properties of silicon-based epoxy resins
Hsiue GH, Wang WJ, Chang FC |
| 1239 - 1245 |
Synthesis and properties of poly(butylacrylate-co-butylmethacrylate) doped with metal clusters
Cardenas G, Salgado E, Morales J, Soto H |
| 1247 - 1257 |
The limiting value of ZDMC formation: New insight into the reaction of ZnO and TMTD
Nieuwenhuizen PJ, Van Duin M, Haasnoot JG, Reedijk J, McGill WJ |
| 1259 - 1265 |
Effect of ultraviolet radiation on photodegradation of collagen
Torikai A, Shibata H |
| 1267 - 1271 |
Composition-dependent properties of Polyethylene Kaolin composites. I. Degree of crystallinity and melting behavior of polyethylene
Privalko EG, Pedosenko AV, Privalko VP, Walter R, Friedrich K |
| 1273 - 1284 |
Structure of sulfonated poly(vinyl fluoride)
Paronen M, Karjalainen M, Jokela K, Torkkeli M, Serimaa R, Juhanoja J, Ostrovskii D, Sundholm F, Lehtinen T, Sundholm G, Torell L |
| 1285 - 1303 |
Toughening and phase separation behavior of nylon 6-PEG block copolymers and in situ nylon 6-PEG blend via in situ anionic polymerization
Kim KJ, Hong DS, Tripathy AR, Kyu T |
| 1305 - 1319 |
Shape-memorized crosslinked ester-type polyurethane and its mechanical viscoelastic model
Lin JR, Chen LW |
| 1321 - 1328 |
Lignin-silica hybrids as precursors for silicon carbide
Hasegawa I, Fujii Y, Yamada K, Kariya C, Takayama T |
| 1329 - 1340 |
Fiber-reinforced cellulosic thermoplastic composites
Glasser WG, Taib R, Jain RK, Kander R |
