| 2021 - 2026 |
Synthesis and characterization of ultraviolet-curable fluorinated polydimethylsiloxanes as ultraviolet-transparent coatings for optical fiber gratings
Colomines G, Andre S, Andrieu X, Rousseau A, Boutevin B |
| 2027 - 2033 |
Preparation of two-layer film having porous structure by emulsion blend technique
Okubo M, Terada A, Kagawa Y |
| 2034 - 2039 |
Competitive removal of heavy metal ions by cellulose graft copolymers
Guclu G, Gurdag G, Ozgumus S |
| 2040 - 2044 |
Supercritical CO2-assisted synthesis of poly(acrylic acid)/nylon1212 blend
Chang YN, Xu Q, Liu MY, Wang YD, Zhao QX |
| 2045 - 2052 |
Silicon-containing anionic water-borne polyurethane with covalently bonded reactive dye
Wang HH, Lin YT |
| 2053 - 2058 |
Thermal behavior and surface morphology studies on polystyrene grafted sago starch
Janarthanan P, Yunus WMZW, Bin Ahmad M |
| 2059 - 2065 |
Syntheses of chemical-modified cellulose obtained from waste pulp
Hadano S, Onimura K, Tsutsumi H, Yamasaki H, Oishi T |
| 2066 - 2072 |
Acrylonitrile polymerization initiated by Ce(IV)-cyclohexanone redox system in presence of surfactant
Patra M, Behera AK, Behera RK |
| 2073 - 2082 |
Effect of filler treatment and crosslinking on mechanical and dynamic mechanical properties and electrical conductivity of carbon black-filled ethylene-vinyl acetate copolymer composites
Das NC, Chaki TK, Khastgir D |
| 2083 - 2090 |
Studies on polyacrylates containing pendant ligand with carbonyl and hydroxyl functions and their divalent metal complexes
Kaliyappan T, Rajagopan S, Kannan P |
| 2091 - 2102 |
Semicontinuous emulsion copolymerization of 3-O-methacryloyl-1,2 : 5,6-di-O-isopropylidene-alpha-D-glucofuranose (3-MDG) and butyl acrylate (BA). Monomer feed addition
Al-Bagoury M, Yaacoub EJ |
| 2103 - 2110 |
Polymer-immobilized cyclodextrin trapping of model organic pollutants in flowing water streams
Orprecio R, Evans CH |
| 2111 - 2119 |
High-density polyethylene foams. I. Polymer and foam characterization
Zhang YL, Rodrigue D, Ait-Kadi A |
| 2120 - 2129 |
High-density polyethylene foams. II. Elastic modulus
Zhang YL, Rodrigue D, Ait-Kadi A |
| 2130 - 2138 |
High-density polyethylene foams. III. Tensile properties
Zhang YL, Rodrigue D, Ait-Kadi A |
| 2139 - 2149 |
High-density polyethylene foams. IV. Tensile properties
Zhang YL, Rodrigue D, Ait-Kadi A |
| 2150 - 2155 |
Isothermal phase diagrams and phase-inversion behavior of poly(vinylidene fluoride)/solvents/additives/water systems
Yeow ML, Liu YT, Li K |
| 2156 - 2162 |
Effect of mica addition of the properties of natural rubber and polybutadiene rubber vulcanizates
Castro DF, Suarez JCM, Nunes RCR, Visconte LLY |
| 2163 - 2169 |
Electrochemical preparation of soluble sulfonated polymers and aniline copolymers of aniline sulfonic acids in dimethylsulfoxide
Sahin Y, Pekmez K, Yildiz A |
| 2170 - 2178 |
Enhancement of mechanical properties and interfacial adhesion of PP/EPDM/flax fiber composites using maleic anhydride as a compatibilizer
Manchado MAL, Arroyo M, Biagiotti J, Kenny JM |
| 2179 - 2186 |
Synthesis and characterization of poly(N-phenyl methacrylamide-co-methyl methacrylate) and reactivity ratios determination
Reddy GJ, Naidu SV, Reddy AVR |
| 2187 - 2193 |
Gas-sorption properties of 6FDA-durene/1,4-phenylenediamine (pPDA) and 6FDA-durene/1,3-phenylenediamine (mPDA) copolyimides
Cheng SX, Chung TS, Wang R, Vora RH |
| 2194 - 2199 |
Durable antimicrobial nylon 66 fabrics: Ionic interactions with quaternary ammonium salts
Son YA, Sun G |
| 2200 - 2205 |
Characterization of poly(trimethylene/butylene terephthalate) copolymer prepared by the copolycondensation of bis(3-hydroxypropyl terephthalate) and bis(4-hydroxybutyl terephthalate)
Kim JH, Park JH, Jang HK, Yoon JY, Lyoo WS |
| 2206 - 2213 |
Thermal degradation kinetics of isotactic and atactic polypropylene
Kumar R, Madras G |
| 2214 - 2223 |
Thermoreversible hydrogels. XVIII. Synthesis, swelling characteristics, and diffusion behaviors of porous, ionic, thermosensitive hydrogels
Lee WF, Chiu RJ |
| 2224 - 2228 |
Synthesis and characterization of poly(ester urethane) nitrokonjac glucomannan semi-interpenetrating polymer networks
Gao SJ, Zhang LN, Cao JL |
| 2229 - 2240 |
Kinetic study of the curing behavior of bismaleimide modified with diallylbisphenol A
Xiong Y, Boey FYC, Rath SK |
| 2241 - 2245 |
Preparation and swelling properties of solution crosslinked poly(cis-1,4-butadiene) gels
Zhang GQ, Zhou MH, Ma JH, Liang BR |
| 2246 - 2254 |
Effects of the chirality and functionality of monomers on the holographic gratings formed in photosensitive films
Liu JH, Wu FT |
| 2255 - 2259 |
Pervaporation performance of PTMSP membranes at high temperatures
Gonzalez-Velasco JR, Lopez-Dehesa C, Gonzalez-Marcos JA |
| 2260 - 2267 |
Synergistic effect of dual rubber system in toughening styrene maleic anhydride copolymers
Wang RW, Wang W |
| 2268 - 2275 |
Influence of elastomer distribution on the cryogenic microcracking of carbon fiber/epoxy composites
Nobelen M, Hayes BS, Seferis JC |
| 2276 - 2287 |
Preparation, characterization, and nanostructural evolution of epoxy nanocomposites
Chen CG, Curliss D |
| 2288 - 2292 |
Studies on thermal activities of fabrics treated by polyethylene glycol
Ma XG, Guo HJ |
| 2293 - 2300 |
Novel positive-working aqueous-base developable photosensitive polyimide precursors based on diazonaphthoquinone-capped polyamic esters
Hsu SLC, Lee PI, King JS, Jeng JL |
| 2301 - 2301 |
A novel catalyst for the glycolysis of poly(ethylene terephthalate) (vol 90, pg 1148, 2003)
Troev K, Grancharov G, Tsevi R, Gitsov I |
