| 1 - 8 |
Fabrication, and Characteristics of Pin-Type a-SiGe:H Thin-Film Solar Cells with a-Si:H Buffer and Graded Absorption Layer
Lee TY, Son WH, Lee SK, Choi SY |
| 9 - 15 |
Effect of Valeric Acid as a Co-adsorbate on the Performance of Dye-Sensitized Solar Cells
Kang CS, Park SK, Kim JT, Kang JK, Han YS, Choi SY |
| 16 - 22 |
Effects of Double Layer Coating on TiO2 Surface on the Photovoltaic Properties of Dye-Sensitized Solar Cells
Park SK, Kim DH, Han YS |
| 23 - 32 |
Improved Open-Circuit Voltage of Dye-Sensitized Solar Cells with LiNO3-Incorporated Titanium Dioxides
Kim JT, Park SK, Kang CS, Kim WH, Han YS |
| 33 - 42 |
Heat Resistant Polymer Matrix Containing Acrylo-Polyhedral Silsesquioxane for Erbium-Doped Waveguide Amplifier Applications
Kim WH, Sung SJ, Choi MS, Kim JT, Han YS |
| 43 - 52 |
Enhanced Performance of Organic Photovoltaic Cells by Incorporation of a Cyanobiphenyl Compound into Active Layer
Han YS |
| 53 - 60 |
Temperature Dependence in the Surface Treatment of Photoelectrode on the Performance of Dye-Sensitized Solar Cells
Han YS |
| 61 - 68 |
Characteristics of Amorphous Silicon Thin-Film Solar Cells of a-Si:H/a-SiGe:H Superlattices in Different Thickness for Barrier and Well Layers
Son WH, Lee SK, Moon YS, Lee TY, Choi SY |
| 69 - 75 |
Characteristics of a-SiGe:H Solar Cell with various Thickness Ratio of a-Si:H/a-SiGe:H Layer in the Intrinsic Layer
Kim AR, Lee SK, Son WH, Lee TY, Choi SY |
| 76 - 81 |
Effects of the Modified TCO Sputtering Condition on ZnS/CIGS Solar Cell
Baek JY, Park SR, Yun TY, Han HJ, Kim KB, Jeon CW |
| 82 - 87 |
Comparison of Aluminum Zinc Oxide and Indium Tin Oxide for Transparent Conductive Oxide layer in Cu(In,Ga)Se-2 Solar Cell
Yun TY, Park SR, Baek JY, Han HJ, Jeon CW |
| 88 - 94 |
Enhanced Performance of Dye-Sensitized Solar Cells with Surface-Modified ZnO Nanorods
Choi SC, Yun WS, Sohn SH |
| 95 - 103 |
Effect of Processing Additives on PCDTBT:PC60BM Based Organic Photovoltaic Cells
Ok S, Choe Y |
| 104 - 110 |
Modeling and Design Consideration of a Simple Hybrid Solar Energy Conversion System
Sohn YS |
| 111 - 120 |
Synthesis and Photovoltaic Performance of Ionic Dyes for Quasi-Solid State Dye-Sensitized Solar Cells
Jung MR, Han YS, Jung DY, Yang HS, Kim JH, Lee DK |
| 123 - 128 |
Effects of Surface Roughness on Gas Barrier Property of Thin Film Passivation with Mg-Zn-F
Lee SY, Shin BW, Lee HR |
| 129 - 137 |
Physical Properties of ZnSe Thin Films Depending on the Process Parameters
Kim MJ, Lee SH, Kim HT, Sohn SH |
| 138 - 146 |
Effects of Post Annealing Temperatures on Sputtered Indium Tin Oxide Films for the Application to Resistive Touch Panel
Lee SM, Lee JM, Kwon SJ, Cho ES |
| 147 - 153 |
Influence of Sulfur Content on Cu2ZnSnS4 Thin Film Formation
Kim C, Hong S |
| 154 - 160 |
Annealing Time Dependence of Crystallization in Cu2ZnSnSe4 Films
Kim C, Hong S, Bae H, Rhee I, Kim HT, Kim DH, Kang JK |
| 161 - 167 |
Screen-Printed Cu Source/Drain Electrodes for a-InGaZnO Thin-Film Transistors
Kim JH, Kim J, Lee GJ, Jeong J, Choi B |
| 168 - 178 |
Low Frequency Noise Characteristics on Al/Nb2O5/p-type Schottky Diode Fabricated by Pulsed DC Magnetron Sputtering
Oh HG, Kim KS, Eom J, Kwon SJ, Cho ES, Lee JH, Cho IH |
| 179 - 187 |
Thermal Annealing Effects on the Characteristics of Transparent Semiconducting Zn2SnO4 Thin Films Prepared by RF-Magnetron Sputtering with Powder Target
Lee GJ, Lee DK, Sohn SH |
| 188 - 195 |
Enhancing the Surface Wettability of Poly(Ethylene Terephthalate) Film by Atmospheric Pressure Plasma Treatment with Ar and N-2 Gas Mixture
Yun TK, Kim JH, Lee DK |
