| 125 - 132 |
Fuzzy-based methodology for performance assessment of emergency planning and its application
Chen GH, Zhang XM |
| 133 - 139 |
An optimizing hazard/risk analysis review planning (HARP) framework for complex chemical plants
Reniers G |
| 140 - 144 |
Analysis of the shock wave ignition and detonation in bituminous coal-dust suspensions
Fedorov AV, Khmel TA, Fomin VM |
| 145 - 152 |
Visualization of emergency viscous two-phase venting behaviors
Duh YS, Hu KH, Chang JC, Kao CS |
| 153 - 161 |
Fault detection in semi-batch reactor using the EKF and statistical method
Benkouider AM, Buvat JC, Cosmao JM, Saboni A |
| 162 - 168 |
Safety of the process industries in the 21st century: A changing need of process safety management for a changing industry
Knegtering B, Pasman HJ |
| 169 - 175 |
Numerical and experimental investigation on the prevention of CO deflagration
Zhang Y, Yu LX, Wei XL, Li T, Li B |
| 176 - 181 |
Risk estimation for industrial safety in raw materials manufacturing
Okabe M, Ohtani H |
| 182 - 186 |
Thermal characteristics of Hydroxypropyl Methyl Cellulose
Lim WS, Choi JW, Iwata Y, Koseki H |
| 187 - 196 |
Computational fluid dynamics analysis on the critical behavior of reactive chemicals
Liu LJ, Guo YY, Rogers WJ, Mannan MS |
| 197 - 203 |
A sequential method to identify underlying causes from industrial accidents reported to the MARS database
Jacobsson A, Sales J, Mushtaq F |
| 204 - 209 |
Dust explosion venting in silos: A comparison of standards NFPA 68 and EN 14491
Tascon A, Aguado PJ, Ramirez A |
| 210 - 215 |
A comparative analysis of the factors affecting the implementation of occupational health and safety management systems in the printed circuit board industry in Taiwan
Chen CY, Wu GS, Chuang KJ, Ma CM |
| 216 - 221 |
Process route index (PRI) to assess level of explosiveness for inherent safety quantification
Leong CT, Shariff AM |
| 222 - 227 |
Prediction of the net heat of combustion of organic compounds based on atom-type electrotopological state indices
Cao HY, Jiang JC, Pan Y, Wang R, Cui Y |
| 228 - 236 |
BIOSAFUEL (R), a pre-diagnosis tool of risks pertaining to biofuels chains
Riviere C, Marlair G |
| 237 - 243 |
A hazard and operability analysis method for the prevention of misoperations in the production of light magnesium carbonate
Wang F, Gao JJ, Guo K |
| 244 - 253 |
Development of Risk-Based Inspection and Maintenance procedures for an oil refinery
Bertolini M, Bevilacqua M, Ciarapica FE, Giacchetta G |
| 254 - 256 |
Hazard assessment for the safe storage, manufacturing and handling of flash compositions
Sivapirakasam SP, Surianarayanan M, Swaminathan G |
