| 2293 - 2297 |
Thermal conductivity of a kaolinite refractory: effect of a plant-derived organic binder
Ogacho AA, Aduda BO, Nyongesa FW |
| 2299 - 2304 |
Non-isothermal crystallization of HDPE/nano-SiO2 composite
Qian JS, He PS |
| 2305 - 2310 |
Fabrication of Li2O-Al2O3-SiO2 glass-ceramic ferrules by precision drawing of crystallized preforms
Sakamoto A, Yamamoto S |
| 2311 - 2319 |
An investigation into the amorphous phase separation characteristics of an ionomer glass series and a sodium-boro-silicate glass system
Rafferty A, Hill RG, Wood D |
| 2321 - 2330 |
Influence of EPS bead fusion on pattern degradation and casting formation in the lost foam process
Rossacci J, Shivkumar S |
| 2331 - 2335 |
Highly porous yttrium aluminium garnet (YAG) particles synthesised by a gel supported precipitation (GSP) process
Fernandez A, Somers J |
| 2337 - 2346 |
Microstructural evolution of brazing 422 stainless steel using the BNi-3 braze alloy
Ou CL, Shiue RK |
| 2347 - 2351 |
A biochar from casein and its properties
Purevsuren B, Avid B, Tesche B, Davaajav Y |
| 2353 - 2356 |
Synthesis of cadmium titanate powders by a sol-gel-hydrothermal method
Zhang XX, Wang H, Huang AP, Xu HY, Zhang YC, Yu DB, Wang B, Yan H |
| 2357 - 2365 |
Morphological study of electrospun polycarbonates as a function of the solvent and processing voltage
Krishnappa RVN, Desai K, Sung CM |
| 2367 - 2372 |
Grain growth of ZnO in binary ZnO-V2O5 ceramics
Hng HH, Tse KY |
| 2373 - 2391 |
Microstructural evolution of simulated heat-affected zone in modified 2.25Cr-1Mo steel during high temperature exposure
Tsai MC, Chiou CS, Yang JR |
| 2393 - 2399 |
Cavitation asymmetry in silicon nitride by scanning laser acoustic microscopy
Lofaj F, Luprano V |
| 2401 - 2408 |
Low temperature hydrogen transport using a palladium/copper membrane
Lessing PA, Wood HC, Zuck LD |
| 2409 - 2414 |
Joining Ti-47Al-2Cr-2Nb with a Ti/(Cu,Ni)/Ti clad-laminated braze alloy
Guedes A, Pinto AMP, Vieira MF, Viana F |
| 2415 - 2422 |
Mechanical and fractographic behavior of natural rubber-cellulose II composites
Martins AF, Suarez JCM, Visconte LLY, Nunes RCR |
| 2423 - 2427 |
Electrochemical fabrication of polythiophene film coated metallic nanowire arrays
Zhang JX, Shi GQ, Liu C, Qu LT, Fu MX, Chen FE |
| 2429 - 2437 |
Structural influence on charge-carrier lifetimes in TiO2 powders studied by microwave absorption
Colbeau-Justin C, Kunst M, Huguenin D |
| 2439 - 2446 |
Electro-oxidation of 2,2'-dithienylketone
Del Valle MA, Diaz FR, Tagle LH, Brovelli F, Bernede JC |
| 2447 - 2453 |
Synthesis of graphite using laser decomposition of SiC
Ohkawara Y, Shinada T, Fukada Y, Ohshio S, Saitoh H, Hiraga H |
| 2455 - 2459 |
Synthesis, characterization and electrical properties of poly(dibromoaniline-co-aniline)s
Diaz FR, Del Valle MA, Tagle LH, Torres JL |
| 2461 - 2468 |
Sintering temperature, microstructure and resistivity of polycrystalline Sm0.2Ce0.8O1.9 as SOFC's electrolyte
Jung GB, Huang TJ |
| 2469 - 2481 |
Development and characterization of novel EPDM/NR prophylactic waste composites
Mathew G, Singh RP, Nair NR, Thomas S |
| 2483 - 2488 |
Reactive brazing of ceria to an ODS ferritic stainless steel
Khan TI, Al-Badri A |
| 2489 - 2498 |
Time-dependent aspects of the mechanical properties of plant and vegetative tissues
Zhu HX, Melrose JR |
| 2499 - 2504 |
Solid state reaction and formation of nano-phase composite hydrogen storage alloy by mechanical alloying of MmNi(3.5)(CoMnAl)(1.5) and Mg
Gao Y, Zeng MQ, Li BL, Zhu M, Chung CY |
| 2505 - 2510 |
A study of the strength of P/M 6061Al and composites during high strain rate superplastic deformation
Li XJ, Tan MJ |
| 2511 - 2516 |
Differential scanning calorimeter studies on Pb modified Ge-Se-Te glasses
Pattanaik AK, Srinivasan A |
| 2517 - 2523 |
The effects of fluid flow on secondary arm coarsening during dendritic solidification
Mullis AM |
| 2525 - 2536 |
Relevance of roughness parameters for describing and modelling machined surfaces
Bigerelle M, Najjar D, Iost A |
| 2537 - 2540 |
Effect of the size of nuclei on crystallization behavior of Li2O center dot 2SiO(2) glass
Wakasugi T, Kadoguchi T, Tanaka K, Ota R |
| 2541 - 2545 |
Correlation between Weibull moduli for tensile and bending strength of brittle ceramics: a numerical simulation analysis based on a three-parameter Weibull distribution
Gong JH |
| 2547 - 2555 |
Evaluation of the mechanisms of water migration through honeycomb core
Shafizadeh JE, Seferis JC, Chesmar EF, Frye BA, Geyer R |
