| 3549 - 3562 |
Effect of anions on the textural and catalytic activity of titania-silica mixed oxide
Samantaray SK, Parida K |
| 3563 - 3567 |
Negative thermal expansion of laminates
Landert M, Kelly A, Stearn RJ, Hine PJ |
| 3569 - 3575 |
Characterisation of TiN and TiAlN thin films deposited on ground surfaces using focused ion beam milling
Cairney JM, Harris SG, Ma LW, Munroe PR, Doyle ED |
| 3577 - 3586 |
Simulation of small-strain deformations of semi-crystalline polymer: Coupling of structural transformations with stress-strain response
Oshmyan V, Patlazhan S, Remond Y |
| 3587 - 3591 |
Preparation and photoconductivity study of azo nanoparticles via liquid phase surfactant-assisted reprecipitation
Yang ZL, Chen HZ, Cao L, Wang M |
| 3593 - 3604 |
A dislocation dynamics study of strength differential in particle-containing metals during cyclic loading
Leger RW, Khraishi TA, Shen YL |
| 3605 - 3611 |
Determination of mechanical properties of pulsed laser-deposited hydroxyapatite thin film implanted at high energy with N+ and Ar+ ions, using nanoindentation
Pelletier H, Nelea V, Mille P, Muller D |
| 3613 - 3617 |
Microstructure stability of fine-grained silicon carbide ceramics during annealing
Lee YI, Kim YW, Mitomo M |
| 3619 - 3628 |
Fibre orientation effects on the fracture of short fibre polymer composites: on the existence of a critical fibre orientation on varying internal material variables
Fara S, Pavan A |
| 3629 - 3633 |
Aqueous dispersion stability of nickel powders prepared by a chemical reduction method
Im DH, Park SY, Hyun SH, Lee BY, Kim YH |
| 3635 - 3639 |
Capacity fading of LiMn2O4 electrode: Influence of calcination temperature
Son JT, Park KS, Kim HG, Chung HT |
| 3641 - 3646 |
Thermal stability and optical transition of Er3+ in sodium-lead-germanate glasses
Yang ZM, Xu SQ, Dai SX, Yang JH, Hu LL, Jiang ZH |
| 3647 - 3657 |
Ultrasonic spray pyrolysis for nanoparticles synthesis
Tsai SC, Song YL, Tsai CS, Yang CC, Chiu WY, Lin HM |
| 3659 - 3676 |
The role of structure on the thermal properties of graphitic foams
Klett JW, McMillan AD, Gallego NC, Walls CA |
| 3677 - 3681 |
Plastic flow instabilities of L1(2) Ni3Al alloys at intermediate temperatures
Honjo H, Kaneno Y, Inoue H, Takasugi T |
| 3683 - 3688 |
Influence of calcination temperature on structural and optical properties of TiO2-SiO2 thin films prepared by sol-gel dip coating
Lee HJ, Hahn SH, Kim EJ, You YZ |
| 3689 - 3694 |
Chemical reaction in Al matrix composite reinforced with SiCp coated by SnO2
Yang G, Fan TX, Zhang D |
| 3695 - 3703 |
Dispersion analysis of asymmetric band shapes: Application to the IR absorption spectrum of silica glass
Efimov AM, Hobert H |
| 3705 - 3716 |
Topological organization and textural changes of carbon macro-networks submitted to activation with N-2 and CO2
Matos J, Labady M, Albornoz A, Laine J, Brito JL |
| 3717 - 3722 |
Processing and properties of transparent super-hydrophobic polymer film with low surface electric resistance
Sasaki M, Kieda N, Katayama K, Takeda K, Nakajima A |
| 3723 - 3732 |
Self-propagating high-temperature synthesis of composite material TiB2-Fe
Lepakova OK, Raskolenko LG, Maksimov YM |
| 3733 - 3737 |
Fracture behavior of ultra-fine grained steel bar under dynamic loading
Qiu H, Kawaguchi Y, Shiga C |
| 3739 - 3744 |
Preparation of nanocrystalline SrBi2Ta2O9 powders using sucrose-PVA as the polymeric matrix
Panda AB, Tarafdar A, Sen S, Pathak A, Pramanik P |
| 3745 - 3750 |
A controllable approach for the synthesis of titanate derivatives of potassium tetratitanate fiber
He M, Feng X, Lu XH, Ji XY, Liu C, Bao NZ, Xie JW |
| 3751 - 3755 |
Fracture strength of melt-infiltrated SiC-mullite composite
Tian J, Shobu K |
| 3759 - 3761 |
Microstructure evolution of AZ31 magnesium alloy during equal channel angular extrusion
Li YY, Zhang DT, Chen WP, Liu Y, Guo GW |
| 3763 - 3765 |
Effect of winding angle on impact properties of thin walled tubes
Korinek Z, Chromy J, Giang LH, Jenikova Z |
| 3767 - 3768 |
Synthesis of transparent thick film of mesoporous TiO2 by solvent evaporation method
Nagamine S, Takahashi S, Sasaoka E |
| 3769 - 3772 |
Micro and nano-indentation of MoSi2
Henzel M, Kovalcik J, Dusza J, Juhasz A, Lendvai J |
| 3773 - 3776 |
Poly(vinyl pyrolidone) coated silver nano powder via displacement reaction
Khanna PK, Gokhale R, Subbarao VVVS |
| 3777 - 3778 |
Organic light emitting diodes based on multi-wall carbon nanotubes (MWNTs) modified electrode
Yang MJ, Zhang QH |
| 3779 - 3781 |
Piezoelectric characteristics of spray dried PLZT ceramics modified by sodium
Mahato DK, Chaudhary RK |
| 3783 - 3785 |
Carbazole-based azo group-containing single component polymer exhibiting photorefractive performance
Shi J, Huang MM, Chen ZJ, Gong GH, Cao SK |
| 3787 - 3791 |
Preparation of low-power loss MgCuZn ferrites using the microwave sintering method
Bhaskar A, Kanth BR, Murthy SR |
| 3793 - 3795 |
New mesoporous carbon prepared by a simultaneous synthetic template carbonization method
Hou ZH, Li XH, He ZQ, Liu EH, Deng LF |
| 3797 - 3798 |
On the load-displacement relations used in the analysis of nanoindentation data
Fu GH |
| 3799 - 3800 |
Measurement of fictive temperature of silica glass optical fibers
Helander P |
| 3801 - 3803 |
Effect of processing on densification of nanostructured SiC ceramics fabricated by two-step sintering
Lee YI, Kim YW, Mitomo M |
| 3805 - 3807 |
Effect of shear energy upon bubble nucleation under shear flow field
Guo MC, Peng YC, Cai YB, Zhou WG |
| 3809 - 3812 |
Microstructures and mechanical properties of three-dimensional C-f/Si-O-C composites fabricated by polysiloxane pyrolysis
Ma QS, Chen ZH, Zheng WW |
| 3813 - 3816 |
Preparation of TiO2 by a nearby vaporization chemical vapor deposition method
Nishino J, Teekateerawej S, Nosaka Y |
| 3817 - 3820 |
Thermal stability of frictional surface layer and wear debris of epoxy nanocomposites in relation to the mechanism of tribological performance improvement
Lu J, Zhang MQ, Rong MZ, Yu SL, Wetzel B, Friedrich K |
| 3821 - 3823 |
Transmission electron microscopy observation of nanoparticles obtained by cutting power laser
Cabanillas ED |
| 3825 - 3827 |
Facile preparation and characterization of hyperbranched poly(amine ester) grafted silica nanoparticles
Liu P, Liu WM, Xue QJ |
| 3829 - 3831 |
Preparation of biodegradable poly(3-hydroxybutyrate) and poly(ethylene glycol) multiblock copolymers
Zhao Q, Cheng GX |
| 3833 - 3837 |
Morphological evolution of Ag nano-wires via thermal evaporation
Wang YG, Li DR, Lu ZC, Zhou SX |
| 3839 - 3843 |
Use of polymer-based sensors for monitoring the static and dynamic response of a cantilever composite beam
Kuang KSC, Quek ST, Cantwell WJ |
| 3845 - 3847 |
Effect of thermal-mechanical cycling on damping capacity of B/Al composite
Qin YC, He SY, Yang DZ |
| 3849 - 3851 |
Erosion of a reaction bonded silicon nitride
Kim JJ |
| 3853 - 3855 |
SrBi2Ta2O9 thin films fabricated by alternate deposition of SrTa2O6 and Bi2O3 layers
Liu JS, Zhang SR, Zhong CW, Zhou JL, Yang CT |
| 3857 - 3857 |
Study of the reaction mechanism in the Al-C binary system through DSC and XRD3 (vol 39, pg 2179, 2004)
Liu XF, Wang ZQ, Zhang JJ, Bian XF |
| 3857 - 3857 |
Monoclinic to cubic phase transformation of ZrO2 induced by ball milling (vol 39, pg 2585, 2004)
Wang ZQ, Liu XF, Bian XF |
