| 3207 - 3228 |
Pressure induced structural behaviour in f-electron based AB, AB(2) and AB(3) intermetallics
Shekar NVC, Sahu PC |
| 3229 - 3232 |
Fatigue behavior of AZ31 magnesium alloy produced by solid-state recycling
Chino Y, Furuta T, Hakamada M, Mabuchi M |
| 3233 - 3239 |
Fatigue behaviour of AISI 304 steel to AISI 4340 steel welded by friction welding
Hascalik A, Unal E, Ozdemir N |
| 3241 - 3247 |
Electrical characterization of titanium nitride surfaces for pacing electrodes
Sanchez G, Dalchiele E, Alles AB |
| 3249 - 3253 |
In situ synthesis of Al2O3 particulate-reinforced Al matrix composite by low temperature sintering
Huo H, Woo KD |
| 3255 - 3262 |
Influence of various fluids on the interlaminar shear strength (ILSS) and impact behaviour of carbon/pei composites
Sinmazcelik T, Arici AA |
| 3263 - 3269 |
One-step synthetic route for producing nanoslabs: Zn-oriented polycrystalline and single-crystalline zinc oxide
Ullah MH, Kim I, Ha CS |
| 3271 - 3297 |
The mechanical properties and fracture behaviour of epoxy-inorganic micro- and nano-composites
Kinloch AJ, Taylor AC |
| 3299 - 3302 |
Microstructure of alumina reinforced with tungsten carbide
Acchar W, Zollfrank C, Greil P |
| 3303 - 3313 |
Phase formation and texture development in mullite/zirconia composites fabricated by templated grain growth
Duran C, Tur YK |
| 3315 - 3322 |
Manufacturing of cellular beta-SiAlON/beta-SiC composite ceramics from cardboard
Rambo CR, Sieber H |
| 3323 - 3327 |
Electrochemical characterization of titanium biomaterials using the Mini-cell System
Nascimento ML, Mueller WD, Carvalho AC, Tomas HM |
| 3329 - 3333 |
Effect of molybdenum on SCC of 17-4PH stainless steel under different aging conditions in chloride solutions
Karaminezhaad M, Sharafi S, Dalili K |
| 3335 - 3340 |
Tailoring size of BaTiO3 nanocrystals via ambient conditions sol process
Devaraju NG, Lee BI, Wang XY, Viviani M, Nanni P |
| 3341 - 3347 |
The bending-kinking analysis of a single-walled carbon nanotube - a combined molecular dynamics and continuum mechanics technique
Mylvaganam K, Vodenitcharova T, Zhang LC |
| 3349 - 3355 |
Compression of homogeneous and graded SiC/EP rings: experimental results and FE modelling
Tsotra P, Friedrich K, Felhos D, Varadi K |
| 3357 - 3361 |
Analysis of structure and properties of biodegradable regenerated silk fibroin fibers
Zuo B, Dai L, Wu Z |
| 3363 - 3367 |
Surface modification of Ti-4Al-2V alloy by nitrogen implantation
Wang ZG, Zu XT, Xiang X, Zhu S, Wang LM |
| 3369 - 3376 |
Physical and mechanical behavior of hot rolled HDPE/HA composites
Pandey A, Jan E, Aswath PB |
| 3377 - 3382 |
Sol-gel synthesis of hydrotalcite - like compounds
Paredes SP, Fetter G, Bosch P, Bulbulian S |
| 3383 - 3390 |
TG/DTA-based techniques for the determination of equilibrium vapour pressures of N,N'-propylenebis(2,4-pentanedion-iminoato)nickel(II) for CVD applications
Arockiasamy S, Premkumar PA, Sreedharan OM, Mallika C, Raghunathan VS, Nagaraja KS |
| 3391 - 3401 |
Application of alumoxane nanoparticles as precursors for 3D alumina features
Loscutova R, Barron AR |
| 3403 - 3415 |
Characterizing microstructure of refractory porous materials
Chen X, Penumadu D |
| 3417 - 3424 |
Hydrothermal-electrochemical codeposited hydoxyapatite/yttria-stabilized zirconia composite coating
Xiao XF, Liu RF, Zheng YZ |
| 3425 - 3433 |
Thermal-induced evolution of secondary phases in Cr-Mo-V low alloy steels
Janovec J, Svoboda M, Kroupa A, Vyrostkova A |
| 3435 - 3439 |
Temperature memory effect in two-way shape memory TiNi and TiNiCu springs
Yu HJ, Wang ZG, Zu XT, Yang SZ, Wang LM |
| 3441 - 3443 |
Investigation on the connecting strength of Fe-Mn-Si-C shape memory alloy pipe coupling
Dai PQ, Zhou LH |
| 3445 - 3450 |
Fabrication of bulk amorphous Fe67Co9.5Nd3Dy0.5B20 alloy by hot extrusion of ribbon and study of the magnetic properties
Biswas K, Ram S, Roth S, Schultz L, Eckert J |
| 3451 - 3458 |
Study of transport properties of Ge50-xSbyTe100+x-y thin film alloy
Bahgat AA, Mahmoud EA, Abd Rabo AS, Mahdy IA |
| 3459 - 3464 |
Effect of friction stir processing on mechanical and microstructural properties of AM60B Magnesium alloy
Cavaliere P, De Marco PP |
| 3465 - 3471 |
An electrochemical evaluation on the crevice corrosion of 430 stainless steel by micro capillary tubing method
Na EY |
| 3473 - 3480 |
Reduction of Ni2+ hydrazine in solution for the preparation of nickel nano-particles
Li ZY, Han CH, Shen JY |
| 3481 - 3487 |
Effect of cooling rate on crystallization and magnetic properties of metallic Co43Fe20Ta5.5B31.5 glass
Yuan ZZ, Chena XD, Wang BX, Chen ZJ |
| 3489 - 3492 |
Hydrothermal synthesis and characterization of novel aloe-like SnS2 nanostructures
Zhu HL, Ji X, Yang DR |
| 3493 - 3500 |
Room and high temperature tensile behaviour of a P/M 2124/MoSi2 composite at different heat treatment conditions
Torres B, Lieblich M |
| 3501 - 3505 |
Amorphous and nanograins in the bonding zone of explosive cladding
Yang Y, Wang B, Xiong J |
| 3507 - 3520 |
Representations about nature of processes occurring in the material at different stages of Bi(Pb)-Sr-Ca-Cu-O ceramic manufacture
Yurchenko IA |
| 3521 - 3526 |
Influence of iodine on the electrical properties of nickel phthalocyanines thin film devices
Varghese AC, Menon CS |
| 3527 - 3534 |
Photocatalytic activity of gallium nitride for producing hydrogen from water under light irradiation
Kida T, Minami Y, Guan G, Nagano M, Akiyama M, Yoshida A |
| 3535 - 3539 |
Low temperature synthesis and characterisation of lecontite, (NH4)Na(SO4)center dot 2H(2)O
Kloprogge JT, Broekmans M, Duong LV, Martens WN, Hickey L, Frost RL |
| 3541 - 3546 |
The structural characterization and its influence on photoluminescence of lithium tetra-(8-hydroxy-quinolinato) boron
Chen J, Li H, Zhang F |
| 3547 - 3552 |
Morphology and diameter controllable synthesis of boron nanowires
Yang Q, Sha J, Wang L, Su Z, Ma X, Wang J, Yang D |
| 3553 - 3559 |
Electrochemical synthesis and characterization of zinc selenide thin films
Mahalingam T, Kathalingam A, Velumani S, Lee S, Sun MH, Deak KY |
| 3561 - 3567 |
Dielectric and piezoelectric properties of (0.97-x) Bi1/2Na1/2TiO3-xBi(1/2)K(1/2)TiO(3)-0.03NaNbO(3) ceramics
Yuan Y, Zhang SR, Liu JS |
| 3569 - 3572 |
Optical properties of TlInS2 layered single crystals near the absorption edge
Qasrawi AF, Gasanly NM |
| 3573 - 3580 |
Optical and structural properties of flash evaporated HgTe thin films
El-Nahass MM, Abd El-Salam F, Seyam MAM |
| 3581 - 3581 |
In situ type study of hydrothermally prepared titanates and silicotitanates (vol 41, pg 1325, 2006)
Clearfield A, Tripathi A, Medvedev D, Celestian A, Parise JB |
