| 2559 - 2562 |
Optical and electrical properties of carbon nitride films deposited by cathode electrodeposition
Zhang JT, Cao CB, Qliang LV, Li C, Zhu HS |
| 2563 - 2570 |
Effect of solvent and cosolvent on friction welding properties between part of PMMA with PVC
Lin CB, Wu LC, Chou YC |
| 2571 - 2579 |
Suspension polymerization casting of lead zirconate titanate, part I: Acrylamide hydrogel system
Miao W, Halloran JW, Brei DE |
| 2581 - 2590 |
Quantitative analysis of the effect of the binder phase composition on grain growth in WC-Co sintered materials
Chabretou V, Allibert CH, Missiaen JM |
| 2591 - 2596 |
Ceramization process of polyvinylsilane as a precursor for SiC-based material
Idesaki A, Miwa Y, Katase Y, Narisawa M, Okamura K, Itoh M |
| 2597 - 2606 |
Mechanical and thermal properties of poly(butylene terephthalate)/poly(ethylene naphthalate), and Nylon66/poly(ethylene naphthalate) blends
Jung DDB, Bhattacharyya D, Easteal AJ |
| 2607 - 2611 |
High-temperature structural change of CrOx-LaOx-Al2O3 catalyst for lean-burn exhaust treatment
Ozawa M, Kato O, Suzuki R |
| 2613 - 2617 |
Intermediate annealing of pure aluminum during cyclic equal channel angular pressings
Chang JY, Shan A |
| 2619 - 2625 |
Intraparticle structures of composite TiO2/SiO2 nanoparticles prepared by varying precursor mixing modes in vapor phase
Cho WH, Kang DJ, Kim SG |
| 2627 - 2631 |
The effect of ZrO2 in 30K(2)O-70SiO(2) glass: a comparison with 30Li(2)O-70SiO(2)
Barbieri L, Corradi A, Lancellotti I, Leonelli C, Siligardi C |
| 2633 - 2638 |
Metalorganic chemical vapor deposition of SrRuO3 thin film and its characterization
Lee HC, Tsai DS |
| 2639 - 2646 |
Relationships between secondary dendrite arm spacing and mechanical properties of Zn-40Al-Cu alloys
Turhal MS, Savaskan T |
| 2647 - 2654 |
The deformation and fracture behavior of SiCw/AZ91 magnesium matrix composite during in-situ TEM straining
Zheng MY, Zhang WC, Wu K, Yao CK |
| 2655 - 2660 |
Preparation of nm-sized BaTiO3 particles using a new 2-step thermal decomposition of barium titanyl oxalate
Wada S, Narahara M, Hoshina T, Kakemoto H, Tsurumi T |
| 2661 - 2666 |
Fabrication of highly dense Ti3SiC2 ceramics by pressureless sintering of mechanically alloyed elemental powders
Li JF, Matsuki T, Watanabe R |
| 2667 - 2671 |
Effect of plasma ion implantation on the hydrogen embrittlement of Cu strengthened HSLA-100 steel
Kumar A, Tarafder S, Mukherjee S, Das SK, Ravikumar B, Chattoraj I |
| 2673 - 2678 |
A flexible route to high strength alpha-alumina and aluminate spheres
Defriend KA, Barron AR |
| 2679 - 2688 |
Structure and magnetic properties of nano-structured heterogeneous Au-Co alloys
Zenou VY, Kusinski G, Yue L, Thomas G |
| 2689 - 2702 |
The effect of excimer laser surface treatment on the pitting corrosion fatigue behaviour of aluminium alloy 7075
Chan CP, Yue TM, Man HC |
| 2703 - 2707 |
Effect of deposition inhomogeneity on the Ohm resistance of thin electroless copper layers
Radoeva M, Radoev B, Stockelhuber KW |
| 2709 - 2716 |
Innovative processing and mechanical properties of high temperature syntactic foams based on a thermoplastic/thermoset matrix
Fine T, Sautereau H, Sauvant-Moynot V |
| 2717 - 2721 |
Enhancement in the microhardness of arc plasma melted tungsten carbide
Nayak BB |
| 2723 - 2725 |
Metastable phase relation and phase equilibria in the Cr2O3-Fe2O3 system
Murakami Y, Sawata A, Tsuru Y, Akiyama K |
| 2727 - 2742 |
Influence of the additives and processing conditions on the characteristics of dense SnO2-based ceramics
Nisiro D, Fabbri G, Celotti GC, Bellosi A |
| 2743 - 2746 |
Topotactic crystallisation of calcite under hydrothermal conditions
Ovenstone J, Romani JO, Davies D, Silver J |
| 2747 - 2754 |
The viscoelastic behavior of beta-In3Sn and the nature of the high-temperature background
McMillan KM, Lakes RS, Cooper RF, Lee T |
| 2755 - 2760 |
Load-increasing fatigue test to characterize the interface of composites under fatigue loadings
Gassan J, Dietz T |
| 2761 - 2765 |
On the stability with temperature of the dislocation structure in 6061Al-15vol%SiC composites as studied by hardness and differential scanning calorimetry
Borrego A, Gonzalez-Doncel G |
| 2767 - 2770 |
Perovskite formation and dielectric responses in Pb(Zn1/3Nb2/3)O-3-modified Pb(Zn1/3Ta2/3)O-3-PbTiO3 ceramics
Suh DH, Kim NK |
| 2771 - 2779 |
A comparative study of the MIG welding of AI/TiC composites using direct and indirect electric arc processes
Garcia R, Lopez VH, Bedolla E, Manzano A |
