| 3229 - 3232 |
Blow spun strontium zirconate fibres produced from a sol-gel precursor
Pullar RC, Taylor MD, Bhattacharya AK |
| 3233 - 3244 |
The structure and properties of spray formed cold rolling mill work roll steels
Hanlon DN, Rainforth WM, Sellars CM, Price R, Gisborne HT, Forrest J |
| 3245 - 3249 |
XPS monitoring of the removal of an aged polymer coating from a metal substrate by TEA-CO2 laser ablation
Cottam CA, Emmony DC, Cuesta A, Bradley RH |
| 3251 - 3254 |
Synthesis and properties of CeN thin films deposited by arc ion plating
Xiao SQ, Tsuzuki K, Sugimura H, Takai O |
| 3255 - 3266 |
Biaxial strength of advanced materials
Hulm BJ, Parker JD, Evans WJ |
| 3267 - 3273 |
Influence of a transition metal oxide (CuO) on the superplastic behaviour of 8 mol% yttria-stabilised cubic zirconia polycrystal (8Y-CSZ)
Tekeli S, Davies TI |
| 3275 - 3284 |
Effect of secondary-phase segregation on the positive temperature coefficient in resistance characteristics of n-BaTiO3 ceramics
Hari NS, Kutty TRN |
| 3285 - 3291 |
Quasi-static and dynamic compression behaviour of an FP (TM) alumina-reinforced aluminium metal matrix composite
Guden M, Hall IW |
| 3293 - 3301 |
Tribological properties of woven para-aramid fabrics and their constituent yarns
Rebouillat S |
| 3303 - 3311 |
Dynamic fracture of a functionally gradient material having discrete property variation
Parameswaran V, Shukla A |
| 3313 - 3319 |
Study of polyethylene pipe resins by a fatigue test that simulates crack propagation in a real pipe
Shah A, Stepanov EV, Klein M, Hiltner A, Baer E |
| 3321 - 3324 |
Synthesis of oxygen-free aluminium nitride ceramics
Witek A, Bockowski M, Presz A, Wroblewski M, Krukowski S, Wlosinski W, Jablonski K |
| 3325 - 3329 |
Electrical properties of a composite of polyurethane and ferroelectric ceramics
Sakamoto WK, Kagesawa S, Kanda DH, Das-Gupta DK |
| 3331 - 3335 |
Effect of Te addition on some physical properties of the Se3S2 system and a study of the response to gamma-irradiation
Maged AF, Wahab LA, El Kholy IA |
| 3337 - 3344 |
The preparation and characterization of hybrid materials composed of phenolic resin and silica
Haraguchi K, Usami Y, Ono Y |
| 3345 - 3350 |
Effect of BTA on electrochemical corrosion and stress corrosion cracking behaviour of type 304 stainless steel in 1 M HCl
Devasenapathi A, Raja VS |
| 3351 - 3359 |
Effects of the creep deformation on the fractal dimension of the grain boundaries in an austenite steel
Tanaka M, Kayama A, Ito Y, Kato R |
| 3361 - 3370 |
Influence of rhenium on the microstructures and mechanical properties of a mechanically alloyed oxide dispersion-strengthened nickel-base superalloy
Ko HS, Paik KW, Park LJ, Kim YG, Tundermann JH |
| 3371 - 3376 |
Dissolution and adhesion behaviour of radio-frequency magnetron-sputtered Ca-P coatings
Wolke JGC, De Groot K, Jansen JA |
| 3377 - 3389 |
Microstructure-related fracture behaviour of injection moulded short fibre reinforced polyarylamide in dry and wet states
Ishak ZAM, Ishiaku US, Karger-Kocsis J |
| 3391 - 3400 |
Mechanical and photoelastic properties of oriented poly-4-methyl-1-pentene investigated by Brillouin spectroscopy
Anders SH, Eberle R, Pietralla M |
| 3401 - 3405 |
Microhardness properties of Cu-W amorphous thin films
Radic N, Stubicar M |
| 3407 - 3417 |
Axial compressive behaviour of reinforcing fibres and interphase in glass/epoxy composite materials
Oya N, Hamada H |
| 3419 - 3425 |
Factors affecting the interfacial adhesion of ultrahigh-modulus polyethylene fibre vinylester composites using gas plasma treatment
Moon SI, Jang J |
| 3427 - 3431 |
Mill setting and microstructural evolution during mechanical alloying of Mg2Si
Riffel M, Schilz J |
| 3433 - 3436 |
Creep deformation behavior of SiC particulate-reinforced Al-C-O composite
Zhou Q, Zhu SJ, Zhao J, Ma ZY, Bi J |
| 3437 - 3441 |
Sintering behaviour of mechanically alloyed and coprecipitated 12Ce-PSZ powders
Maschio S, Bachiorrini A, Lucchini E |
| 3443 - 3453 |
How and why CVD diamond is formed: A solution of the thermodynamic paradox
Piekarczyk W |
| 3455 - 3464 |
Fracture resistance of polyblends and polyblend matrix composites - Part III - Role of rubber type and location in nylon 6,6/SAN composites
Nair SV, Subramaniam A, Goettler LA |
| 3465 - 3470 |
Pitting susceptibility of UNS NO. 8904 stainless steel in bromide-sulphide solution
el Meguid EAA |
| 3471 - 3477 |
A novel technique for synthesis of silver nanoparticles by laser-liquid interaction
Subramanian R, Denney PE, Singh J, Otooni M |
| 3479 - 3488 |
Ductility and toughenability study of epoxy resins under multiaxial stress states
Kishi H, Shi YB, Huang J, Yee AF |
