| 3069 - 3069 |
Polymer fibres 2000 - The Manchester Conference Centre, Manchester, UK, 5-7 July 2000
Young RJ |
| 3071 - 3077 |
Studies of the mesophase development in polymeric fibers during deformation by synchrotron SAXS/WAXD
Ran SF, Zong XH, Fang DF, Hsiao BS, Chu B, Cunniff PM, Phillips RA |
| 3079 - 3087 |
Single fibre deformation studies of poly(p-phenylene benzobisoxazole) fibres - Part I - Determination of Crystal Modulus
Davies RJ, Montes-Moran MA, Riekel C, Young RJ |
| 3089 - 3095 |
Electrically conductive PANi multifilaments spun by a wet-spinning process
Zhou J, Tzamalis G, Zaidi NA, Comfort NP, Monkman AP |
| 3097 - 3101 |
The application of factorial experimental design to the processing of polypropylene fibres
Yang RD, Mather RR, Fotheringham AF |
| 3103 - 3111 |
Reactive extrusion and melt spinning - A new technological route to special fibres
Beyreuther R, Tandler B, Hoffmann M, Vogel R |
| 3113 - 3118 |
Neural modelling of polypropylene fibre processing: Predicting the structure and properties and identifying the control parameters for specified fibres
Allan G, Yang R, Fotheringham A, Mather R |
| 3119 - 3128 |
Drawability and attainable mechanical properties of polyamide yarn using true stress-true strain curves
Van Ruiten J, Riedel R, Deblieck R, Brouwer R, Penning JP |
| 3129 - 3135 |
Deformation mechanisms in cellulose fibres, paper and wood
Eichhorn SJ, Sirichaisit J, Young RJ |
| 3137 - 3142 |
Ballistic protection mechanisms in personal armour
Jacobs MJN, Van Dingenen JLJ |
| 3143 - 3164 |
Review spherulites: A personal perspective
Magill JH |
| 3165 - 3177 |
The role of pressure annealing in improving the stiffness of polyethylene/hydroxyapatite composites
Unwin AP, Ward IM, Ukleja P, Weng J |
| 3179 - 3188 |
Fabrication and characteristics of AA6061/SiCp composites by pressureless infiltration technique
Lee KB, Sim HS, Kim SH, Han KH, Kwon H |
| 3189 - 3195 |
Improved contacting by the use of silver in solid oxide fuel cells up to an operating temperature of 800 degrees C
Meulenberg WA, Teller O, Flesch U, Buchkremer HP, Stover D |
| 3197 - 3206 |
Phase transformation reactions in rapidly solidified Al-6.5Fe-1.5V alloys
Tongsri R, Minay EJ, Thackray RP, Dashwood RJ, Mcshane HB |
| 3207 - 3213 |
Structure formation and miscibility of sheets from PBT and LCP blends
Qi K, Nakayama K |
| 3215 - 3220 |
Surface effects in chromate conversion coatings on 2024-T3 aluminum alloy
Sun X, Li R, Wong KC, Mitchell KAR, Foster T |
| 3221 - 3227 |
Nanostructured thin palladium-silver membranes: Effects of grain size on gas permeation properties
McCool BA, Lin YS |
| 3229 - 3232 |
Application of equal channel angular extrusion on strengthening of ferritic stainless steel
Saito N, Mabuchi M, Nakanishi M, Shigematsu I, Yamauchi G, Nakamura M |
| 3233 - 3238 |
Synthesis of tungsten monocarbide by self-propagating high-temperature synthesis in the presence of an activative additive
Zhang J, Lee JH, Maeng DY, Won CW |
| 3239 - 3246 |
The influence of Poisson contraction on matrix cracking stress in fiber reinforced ceramics
Chiang YC |
| 3247 - 3251 |
The effect of Co2+ on the structure and colour of silica gel derived materials
Da Silva MGF |
| 3253 - 3260 |
Hydroxy- and fluorapatite films on Ti alloy substrates: Sol-gel preparation and characterization
Cavalli M, Gnappi G, Montenero A, Bersani D, Lottici PP, Kaciulis S, Mattogno G, Fini M |
| 3261 - 3271 |
Non-equilibrium solidification by laser surface alloying of molybdenum with nickel: Structure and properties of alloyed layers
Pawlak R, Gawronski Z, Gasser A, Wissenbach K |
| 3273 - 3276 |
Ultrafine zinc oxide powders prepared by precipitation/mechanical milling
Deng HM, Ding J, Shi Y, Liu XY, Wang J |
| 3277 - 3282 |
Low-temperature chemical synthesis of lanthanum copper oxide
Wang XH, Zhou YC |
| 3283 - 3289 |
Effect of process parameters on synthesis of aluminum nitride powder prepared by chemical vapor deposition
Wang MC, Tsai MS, Wu NC |
| 3291 - 3297 |
Effects of excess Te on the thermoelectric properties of p-type 25% Bi2Te3-75% Sb2Te3 single crystal and hot-pressed sinter
Hwang CW, Hyun DB, Ha HP, Oh TS |
| 3299 - 3311 |
Formation of niobium-tantalum pentoxide orthorhombic solid solutions under chlorine-bearing atmospheres
Gonzalez J, Ruiz MDC, Pasquevich D, Bohe A |
| 3313 - 3322 |
Processing of composites in the Ti-Si-C system
Park CS, Zheng F, Salamone S, Bordia RK |
| 3323 - 3332 |
Hydroxyapatite-316L fibre composites prepared by vibration assisted slip casting
Miao X, Ruys AJ, Milthorpe BK |
