| 3959 - 3960 |
Preface - Syntactic and composite foams: Proceedings of an Engineering Conferences International (ECI) conference
Gladysz GM, Chawla KK |
| 3961 - 3972 |
Structure and mechanical properties of micro and macro balloons: An overview of test techniques
Carlisle KB, Chawla KK, Gladysz GM, Koopman M |
| 3973 - 3977 |
Characterization of pore size of trimethylol propane triacrylate (TMPTA) polymer foam by pulsed sputter coating and SEM analysis
Faith D, Horsfield CJ, Nazarov W |
| 3979 - 3986 |
Foaming binary solution mixtures of low molecular surfactant and polyelectrolyte
Aidarova SB, Musabekov KB, Ospanova ZB, Guden M |
| 3987 - 3997 |
Microstructure and compressive properties of carbon microballoons
Carlisle KB, Koopman M, Chawla KK, Kulkarni R, Gladysz GM, Lewis M |
| 3999 - 4008 |
Poly(D,L-lactide) (PDLLA) foams with TiO2 nanoparticles and PDLLA/TiO2-Bioglass (R) foam composites for tissue engineering scaffolds
Boccaccini AR, Blaker JJ, Maquet V, Chung W, Jerome R, Nazhat SN |
| 4009 - 4014 |
Microstructural failure modes in three-phase glass syntactic foams
Koopman M, Chawla KK, Carlisle KB, Gladysz GM |
| 4015 - 4022 |
Shear properties of CMB syntactic foam
Chavez GM, Lewis MW, Lenke LR |
| 4023 - 4039 |
Blast impact response of aluminum foam sandwich composites
Sriram R, Vaidya UK, Kim JE |
| 4041 - 4046 |
Characterization of epoxy syntactic foams by dynamic mechanical analysis
Sankaran S, Sekhar KR, Raju G, Kumar MNJ |
| 4047 - 4054 |
Hydrolytic ageing of syntactic foams for thermal insulation in deep water: degradation mechanisms and water uptake model
Sauvant-Moynot V, Gimenez N, Sautereau H |
| 4055 - 4060 |
Dopeable styrenic foams used in inertial fusion targets
Steckle WP, Schoonover JR, Lanier NE, Nobile A |
| 4061 - 4073 |
Experimental determination of the thermal conductivity of three-phase syntactic foams
Shabde VS, Hoo KA, Gladysz GM |
| 4075 - 4084 |
SiC-particulate aluminum composite foams produced from powder compacts: foaming and compression behavior
Guden M, Yuksel S |
| 4085 - 4092 |
Three-phase syntactic foams: structure-property relationships
Gladysz GM, Perry B, Mceachen G, Lula J |
| 4093 - 4104 |
The double-torsion testing technique for determination of fracture toughness and slow crack growth behavior of materials: A review
Shyam A, Lara-Curzio E |
| 4105 - 4116 |
Ballistic fibers: A review of the thermal, ultraviolet and hydrolytic stability of the benzoxazole ring structure
Holmes GA, Rice K, Snyder CR |
| 4117 - 4121 |
Crystalline carbon nitride films prepared by microwave plasma chemical vapour deposition
Jiang JC, Cheng WJ, Zhang Y, Zhu HS, Shen DZ |
| 4123 - 4131 |
Development of vapor grown carbon fibers (VGCF) reinforced carbon/carbon composites
Dhakate SR, Mathur RB, Dhami TL |
| 4133 - 4136 |
Luminescent properties of YAl3(BO3)(4): Eu3+ phosphors
Yang H, Ren ZY, Cui YM, Yu LX, Feng SH |
| 4137 - 4142 |
Effects of external electric field on microstructure and property of friction welded joint between copper and stainless steel
Fu L, Du SG |
| 4143 - 4151 |
Characterisation methods for functionally graded materials
Tomandl G, Mangler M, Stoyan D, Tscheschel A, Freiberg TB, Goebbels J, Weidemann G |
| 4153 - 4158 |
Direct ink-jet printing and low temperature conversion of conductive silver patterns
Smith PJ, Shin DY, Stringer JE, Derby B, Reis N |
| 4159 - 4162 |
Hydroxyapatite forming ability of electrostatic spray pyrolysis derived calcium phosphate nano powder
Hwang KS, Jeon KO, Jeon YS, Kim BH |
| 4163 - 4167 |
Preparation and characterization of LiMn2O4 and LiCo0.16Mn1.84O4 as cathode materials for lithium-ion batteries by low heating solid state coordination method
Huang YD, Li J, Jia DZ |
| 4169 - 4177 |
Effect of thermal conductivity on reaction front propagation during combustion synthesis of intermetalics
Ballas M, Song H, Ilegbusi OJ |
| 4179 - 4183 |
Influence of negative voltage on the structure and properties of DLC films deposited on NiTi alloys by PBII
Cheng Y, Zheng YF |
| 4185 - 4190 |
Effect of Re-Nb on the strength and toughness of 3Cr2MoNiWV cast hot working die steel
Song YP, Mao XM, Wang WY, Ouyang ZY, Liang HY, Li LL |
| 4191 - 4195 |
Formation characteristics of an aluminum hydroxide fiber by a hydrolysis of aluminum nano powder
Oh YH, Rhee CK, Kim DH, Lee GH, Kim WW |
| 4197 - 4204 |
Porous methacrylate tissue engineering scaffolds: using carbon dioxide to control porosity and interconnectivity
Barry JJA, Silva MMCG, Cartmell SH, Guldberg RE, Scotchford CA, Howdle SM |
| 4205 - 4213 |
Microstructure and ionic conductivity of Sr- and Mg-doped LaGaO3
Liu N, Shi M, Wang C, Yuan YP, Majewski P, Aldinger F |
| 4215 - 4220 |
Preparation of composite particles coated with two kinds of solid powders by semi-chemical recycle method
Tanaka M, Taguchi Y, Sawatari N, Saito N |
| 4221 - 4226 |
Microstructural development and electrical properties of lead zirconate titanate composite films
Chen ST, Wu JM, Yeh TS, Hu LJ |
| 4227 - 4232 |
Microstructure and mechanical behavior of AlSiCuMgNi piston alloys reinforced with TiB2 particles
Zhao DG, Liu XF, Pan YC, Liu YX, Bian XF |
| 4233 - 4237 |
Self-diffusion of transition metals in (Ti,W,Cr)B-2 solid solutions
Schmidt H, Borchardt G, Schmalzried C, Telle R, Baumann H, Weber S, Scherrer H |
| 4239 - 4245 |
Nanoparticle-induced enhancement in fracture toughness of highly loaded epoxy composites over a wide temperature range
Han JT, Cho K |
| 4247 - 4250 |
Spray-drying process for synthesis of nanosized LiMn2O4 cathode
Wu HM, Tu JP, Yang YZ, Shi DQ |
| 4251 - 4258 |
Growth and characterization of partially oxidized platinum polymers in nanoscale templates
Anderson BM, Hurst SK, Spangler L, Abbott EH, Martellaro P, Pinhero PJ, Peterson ES |
| 4259 - 4265 |
Effect of Al doping on structural and dielectric properties of PLZT ceramics
Rai R, Sharma S, Choudhary RNP |
| 4267 - 4272 |
A systematic study on the growth of PZNT films by LPE method
Zeng XH, Qin F, Yao X, Xu NH, Xu S |
| 4273 - 4284 |
Composition and crystal structure of resorbable calcium phosphate thin films
Tuck L, Sayer M, Mackenzie M, Hadermann J, Dunfield D, Pietak A, Reid JW, Stratilatov AD |
| 4285 - 4292 |
A new indirect method of measuring the contents of solid inclusions in liquid aluminium alloys
Cao X |
| 4293 - 4297 |
Corrosion and stress corrosion cracking behavior of equal channel angular pressed oxygen-free copper in 3.5% NaCl solution
Jang YH, Kim SS, Han SZ, Lim CY, Kim CJ |
| 4299 - 4302 |
Effect of minor Sc and Zr addition on the mechanical properties of Friction Stir Processed 2024 aluminium alloy
Cavaliere P |
| 4303 - 4306 |
Phase relationship in the Fe-Pt-Pr ternary system at 500 degrees C
Gu ZF, Cheng G, Ren J, Wang ZM, Zhou HY |
| 4307 - 4313 |
Mechanical and fracture behavior of powder metallurgy processed Ti3Al-based alloys
Dimcic B, Cvijovic I, Jovanovic MT, Bozic D, Dimcic O |
| 4315 - 4319 |
Waste glass and fly ash derived glass-ceramic
Yoon SD, Yun YH |
| 4321 - 4326 |
Fibre-reinforced composite implant: in vitro mechanical interlocking with bone model material and residual monomer analysis
Mattila RH, Puska MA, Lassila LVJ, Vallittu PK |
| 4327 - 4333 |
Electrical behaviour of materials based on monoclinic celsian derived from cation-exchanged commercial zeolites
Motori A, Patuelli F, Saccani A, Andreola F, Bondioli F, Siligardi C, Ferrari AM |
| 4335 - 4341 |
Glycothermal synthesis of vanadiurn(III) phosphate hydrates
Nakamura T, Inui T, Inoue M, Miyake T |
| 4343 - 4347 |
Designing biological apatite suitable for neomycin delivery
Murugan R, Ramakrishna S |
| 4349 - 4356 |
Monitoring of cure kinetic prepreg and cure cycle modeling
Costa ML, Botelho EC, Rezende MC |
| 4357 - 4364 |
Feasibility of three-dimensional macroporous scaffold using calcium phosphate glass and polyurethane sponge
Park YS, Kim KN, Kim KM, Choi SH, Kim CK, Legeros RZ, Lee YK |
| 4365 - 4372 |
Methods for modelling the ultimate strength of orthotropic plate with a central hole under uniaxial tension
Arino SB, Frechin MM |
| 4373 - 4373 |
Conductive percolation threshold of conductive-insulating granular composites (vol 41, pg 2157, 2006)
Ren L, Han Z, Tong J, Li J, Chen D, He D |
