| 4441 - 4462 |
Cold spray as an emerging technology for biocompatible and antibacterial coatings: state of art
Vilardell AM, Cinca N, Concustell A, Dosta S, Cano IG, Guilemany JM |
| 4463 - 4476 |
BiFeO3 thin films via aqueous solution deposition: a study of phase formation and stabilization
Pavlovic N, D'Haen J, Modarresi H, Riskin A, De Dobbelaere C, Van Bael MJ, Temst K, Hardy A, Van Bael MK |
| 4477 - 4485 |
Electrospun composite nanofibers of polyacrylonitrile and Ag2CO3 nanoparticles for visible light photocatalysis and antibacterial applications
Panthi G, Park SJ, Kim TW, Chung HJ, Hong ST, Park M, Kim HY |
| 4486 - 4494 |
Diluted and undiluted monodispersed CoFe2O4 nanoparticles: the effects of post-annealing on magnetic properties
Xu YF, Ma YQ, Xu ST, Zheng GH, Dai ZX |
| 4495 - 4502 |
Synthesis and characterization of magnetic (Cr0.5Mn0.5)(2)GaC thin films
Petruhins A, Ingason AS, Lu J, Magnus F, Olafsson S, Rosen J |
| 4503 - 4515 |
Synthesis of 3D hierarchical architectures of Tb-2(CO3)(3): Eu3+ phosphor and its efficient energy transfer from Tb3+ to Eu3+
Zhou L, Yang J, Hu SS, Luo Y, Yang J |
| 4516 - 4525 |
Generalized additivity rule for the Kolmogorov-Johnson-Mehl-Avrami kinetics
Tomellini M |
| 4526 - 4535 |
Xerocellulose: lightweight, porous and hydrophobic cellulose prepared via ambient drying
Pour G, Beauger C, Rigacci A, Budtova T |
| 4536 - 4546 |
Nanoporous Ag2O photocatalysts based on copper terephthalate metal-organic frameworks
Mohaghegh N, Kamrani S, Tasviri M, Elahifard M, Gholami M |
| 4547 - 4564 |
Functional group changes of polyacrylonitrile fibres during their oxidative, carbonization and electrochemical treatment
Simitzis JC, Georgiou PC |
| 4565 - 4575 |
Simulation of reflectance from white-anodised aluminium surfaces using polyurethane-TiO2 composite coatings
Gudla VC, Johansen VE, Canulescu S, Schou J, Ambat R |
| 4576 - 4585 |
Towards UV-curable inkjet printing of biodegradable poly (lactic acid) fabrics
Karim MN, Afroj S, Rigout M, Yeates SG, Carr C |
| 4586 - 4599 |
Effect of double aluminium doping on the structure, stability and electronic properties of small gold clusters
Bhattacharjee D, Mishra BK, Deka RC |
| 4600 - 4609 |
Preparation of nitrogen-functionalized mesoporous carbon and its application for removal of copper ions
Li ZY, Ren SL |
| 4610 - 4621 |
Modeling grain growth kinetics of binary substitutional alloys by the thermodynamic extremal principle
Gong MM, Castro RHR, Liu F |
| 4622 - 4628 |
Synthesis of ordered mesoporous carbon nanofiber arrays/nickel-boron amorphous alloy with high electrochemical performance for supercapacitor
Tan YY, Zhang W, Gao YL, Wu JX, Tang BHJ |
| 4629 - 4635 |
Sensitivity of thermo-electric power measurements to alpha-alpha' phase separation in Cr-rich oxide dispersion strengthened steels
Pinkas M, Foxman Z, Froumin N, Hahner P, Meshi L |
| 4636 - 4645 |
Numerical model for sparking and plasma formation during spark plasma sintering of ceramic compacts
Marder R, Estournes C, Chevallier G, Chaim R |
| 4646 - 4658 |
Experimental assessment of toughness in ceramic matrix composites using the J-integral with digital image correlation part I: methodology and validation
Tracy J, Waas A, Daly S |
| 4659 - 4671 |
Experimental assessment of toughness in ceramic matrix composites using the J-integral with digital image correlation part II: application to ceramic matrix composites
Tracy J, Waas A, Daly S |
| 4672 - 4682 |
Characterization and biocompatibility of a calcium-containing AZ31B alloy as a biodegradable material
Kim YK, Park IS, Lee KB, Lee SJ, Bae TS, Lee MH |
| 4683 - 4697 |
A comparative analysis of solubility, segregation, and phase formation in atomized and cryomilled Al-Fe alloy powders
Saller BD, Hu T, Ma KK, Kurmanaeva L, Lavernia EJ, Schoenung JM |
| 4698 - 4706 |
CO2 absorption properties of Ti- and Na-doped porous Li4SiO4 prepared by a sol-gel process
Xiang MQ, Zhang YC, Hong M, Liu SY, Zhang Y, Liu H, Gu C |
| 4707 - 4716 |
One-step fabrication of a nickel foam-based superhydrophobic and superoleophilic box for continuous oil-water separation
Wang EQ, Wang HY, Liu ZJ, Yuan RX, Zhu YJ |
| 4717 - 4728 |
Effect of PVA and copper oxide nanoparticles on the structural, optical, and electrical properties of carboxymethyl cellulose films
El Sayed AM, El-Gamal S, Morsi WM, Mohammed G |
| 4729 - 4740 |
Effects of sonication energy on the dispersion of carbon nanotubes in a vinyl ester matrix and associated thermo-mechanical properties
Sabet SM, Mahfuz H, Hashemi J, Nezakat M, Szpunar JA |
| 4741 - 4748 |
Detection of cholesterol molecules with a liquid crystal-based pH-driven sensor
Wei Y, Jang CH |
| 4749 - 4761 |
Mechanical properties and relaxation behavior of crumpled aluminum foils
Balankin AS, Cruz MAM, Caracheo LAA, Huerta OS, Rivas CD, Martinez CL, Ochoa DS, Ruiz LM, Gutierrez SM, Ortiz JP, Ortiz MP |
| 4762 - 4771 |
Influence of the grain boundary character on the temperature of transition to complete wetting in the Cu-In system
Straumal AB, Yardley VA, Straumal BB, Rodin AO |
| 4772 - 4778 |
Excitation wavelength dependent luminescence properties for Eu3+-activated Ba2Gd2Si4O13 phosphor
Zhang F, Li GQ, Huang Y, Tao Y |
