| 3613 - 3616 |
Optimizing the Performance of High-Speed Steel Circular-Saw Blades Machining Cupro-107, Inconel-600L and Nimonic-Pk31 Nickel-Based Alloys
Sarwar M, Bradbury SR, Lewis DB |
| 3617 - 3621 |
Synthesis of Ultrafine LiCoO2 Powders by the Sol-Gel Method
Sun YK, Oh IH, Hong SA |
| 3623 - 3637 |
Densification of Ultrafine SiC Powders
Vassen R, Kaiser A, Forster J, Buchkremer HP, Stover D |
| 3639 - 3642 |
Crystallization Behavior and Phase Coexistence at Morphotrophic Phase Boundaries in PZT Thin-Films Prepared by Sol-Gel Processing
Ontalus V, Cobianu C, Vasiliu F, Parlog C |
| 3643 - 3645 |
Preparation of Barium-Titanate by Homogeneous Precipitation
Kim SW, Lee MH, Noh TY, Lee C |
| 3647 - 3649 |
Growth and Characterization of Snse2
Trifonova E, Yanchev IY, Manou P, Kambas K, Anagnostopoulos AN |
| 3651 - 3656 |
Preparation of Highly Oriented Thin-Film Exhibiting Transparent Conduction by the Sol-Gel Process
Nishio K, Miyake S, Sei T, Watanabe Y, Tsuchiya T |
| 3657 - 3660 |
Inviscid Melt-Spun High-Temperature Alumina-Magnesia Fibers
Sung YM, Dunn SA |
| 3661 - 3665 |
Pressure-Pulsed Chemical-Vapor Infiltration of SiC to Porous Carbon from a Gas System Sicl4-CH4-H-2
Sugiyama K, Kishida T |
| 3667 - 3674 |
Microstructural Features of Dissimilar MMC/AISI-304 Stainless-Steel Friction Joints
Pan C, Hu L, Li Z, North TH |
| 3675 - 3678 |
A Simplified Method for Determining K-IC in Glass with Liquid Solutions Impregnation
Kittl P, Diaz G, Martinez V |
| 3679 - 3683 |
Microstructure and Thermal-Conductivity of AIN Ceramics Containing Additives
Du SA, Gao LQ, Li F, Liu Z, Young JO |
| 3685 - 3690 |
Preparation of Ultradispersed Magnesium Nitride by the Electric-Arc Low-Temperature Plasma Technique
Vissokov GP, Pirgov PS |
| 3691 - 3695 |
Simultaneous Fabrication of a Composite with Low Thermal-Expansion and High-Strength in the Eucryptite-Yttria-Stabilized PSZ System
Shimada T, Mizuno M, Kurachi K, Kato N, Sakurada O, Hashiba M, Nurishi Y |
| 3697 - 3700 |
Chemical-Vapor Growth of Hfc Whiskers and Their Morphology
Motojima S, Kawashima Y |
| 3701 - 3706 |
The Role of Particle-Size and Polymer Molecular-Weight in the Formation and Properties of an Organo-Ceramic Composite
Tan LS, Mchugh AJ |
| 3707 - 3713 |
A Study of Combustion Synthesis of Ti-Al Intermetallic Compounds
Yang WY, Weatherly GC |
| 3715 - 3721 |
Phases in as-Spun and Aged Binary Aluminum-Lithium Ribbons
Hajjaji M, Cutler L, Lesperance G |
| 3723 - 3729 |
Stresses and Failure in the Diametral Compression Test
Fahad MK |
| 3731 - 3737 |
Quench Modification of Aluminum-Silicon Eutectic Alloys
Khan S, Elliott R |
| 3739 - 3742 |
Preferred Orientation of Plasma-Sprayed Hydroxyapatite Coatings
Tong WD, Chen JY, Li XD, Feng JM, Cao Y, Yang ZJ, Zhang XD |
| 3743 - 3746 |
Carbon Deposition by Electrolytic Heating of a Water-Ethanol Solution
Suzuki T, Noma T, Wada S, Yamazaki T, Manita Y, Yanai T |
| 3747 - 3761 |
Styrenics Materials and Cyclopentane - Problems and Perspectives
Maestrini C, Callaioli A, Rossi M, Bertani R |
| 3763 - 3768 |
Microstructure and Properties of a RS/Pm Al-Fe-Co Alloy
Stefaniay V, Lendvai A, Turmezey T |
| 3769 - 3775 |
Studies on Fusion Zone Fracture-Behavior of Electron-Beam Welds of an Alpha+beta-Titanium Alloy
Mohandas T, Banerjee D, Mahajan YR, Rao VV |
| 3777 - 3789 |
Fatigue of Rubber-Modified Epoxies - Effect of Particle-Size and Volume Fraction
Azimi HR, Pearson RA, Hertzberg RW |
| 3791 - 3803 |
The Formation of TiC/Al2O3 Microstructures by a Self-Propagating High-Temperature Synthesis Reaction
Bowen CR, Derby B |
| 3805 - 3812 |
Magnetic-Properties and Thermal-Stability of Co-TM-Zr (Tm=nb, Ta, Mo, W, and Ni) Amorphous Sputtered Films for Magnetic Heads
Otomo S |
| 3813 - 3819 |
Effects of Hydrostatic Extrusion on the Mechanical and Thermal-Properties of Polypropylene
Ariyama T |
| 3821 - 3825 |
Influence of the Magnetically Treated 3-Percent Sodium-Chloride Solution on the Corrosion of Iron
Chiba A, Wu WC, Terashita A |
| 3827 - 3830 |
Formation of Iron-Oxides by the Oxidation of Iron in Fe-Moh-H2O and Fe-Moh-H2O-O-2 Systems (M=li, Na, K)
Uchida S, Kashiwagi H, Sato T, Okuwaki A |
| 3831 - 3837 |
Estimation, Using Infrared-Spectroscopy, of the Cyclization of Poly(Acrylonitrile) During the Stabilization Stage of Carbon-Fiber Production
Zhu Y, Wilding MA, Mukhopadhyay SK |
| 3839 - 3845 |
On the Influence of the Chromium Content on the Evolution of Rolling Textures in Ferritic Stainless-Steels
Raabe D |
| 3847 - 3852 |
Austenitic Grain-Size Evolution and Continuous Cooling Transformation Diagrams in Vanadium and Titanium Microalloyed Steels
Penalba F, Deandres CG, Carsi M, Zapirain F |
| 3853 - 3860 |
Multicomponent Compounding of Polypropylene
Jarvela PA, Jarvela PK |
| 3861 - 3869 |
Stress Disturbances Arising from Cut Fiber and Matrix in Unidirectional Metal-Matrix Composites Calculated by Means of a Modified Shear Lag Analysis
Ochiai S, Hojo M |
| 3871 - 3877 |
Characterization of Absorbed Water in Aramid Fiber by Nuclear-Magnetic-Resonance
Connor C, Chadwick MM |
| 3879 - 3885 |
A New Statistical Damage Theory
Diao X |
| 3887 - 3891 |
High-Temperature Deformation of Cordierite Glass-Ceramic/SiC Platelet Composites
Chaim R, Munoz A, Miranda H, Dominguezrodriguez A |
