| 6143 - 6159 |
Review: the characterization of electrospun nanofibrous liquid filtration membranes
Kaur S, Sundarrajan S, Rana D, Sridhar R, Gopal R, Matsuura T, Ramakrishna S |
| 6160 - 6166 |
The effect of fast annealing treatment on the interface structure and electrical properties of Au/Hg3In2Te6 contact
Sun J, Fu L, Ringer SP, Li YP, Liu ZW |
| 6167 - 6179 |
Discontinuous reactions in melt-spun Cu-10 at. %Co alloys and their effect on magnetic anisotropy
Suguihiro NM, Xing YT, Haeussler D, Jaeger W, Smith DJ, Baggio-Saitovitch E, Solorzano IG |
| 6180 - 6190 |
Effect of processing parameters on the structure and multi-functional performance of epoxy/GNP-nanocomposites
Ahmadi-Moghadam B, Taheri F |
| 6191 - 6202 |
Adsorption characteristics of noble metals on the strongly basic anion exchanger Purolite A-400TL
Wolowicz A, Hubicki Z |
| 6203 - 6216 |
Molybdenum ion: a structural probe in lithium-antimony-germanate glass system by means of dielectric and spectroscopic studies
Vijay R, Babu PR, Gandhi Y, Piasecki M, Rao DK, Veeraiah N |
| 6217 - 6224 |
Graphene sheets decorated with ZnO nanoparticles as anode materials for lithium ion batteries
Xu LL, Bian SW, Song KL |
| 6225 - 6239 |
Controlling foam morphology of polystyrene via surface chemistry, size and concentration of nanosilica particles
Zakiyan SE, Famili MHN, Ako M |
| 6240 - 6247 |
Influence of plastic deformation on the precipitation of Cr in copper
Chbihi A, Sauvage X, Blavette D |
| 6248 - 6256 |
Fe dopants enhancing ethanol sensitivity of ZnO thin film deposited by RF magnetron sputtering
Hassan MM, Khan W, Naqvi AH, Mishra P, Islam SS |
| 6257 - 6269 |
Keratins extracted from Merino wool and Brown Alpaca fibres as potential fillers for PLLA-based biocomposites
Aluigi A, Tonetti C, Rombaldoni F, Puglia D, Fortunati E, Armentano I, Santulli C, Torre L, Kenny JM |
| 6270 - 6281 |
Tetracycline hydrochloride (TCH)-loaded drug carrier based on PLA:PCL nanofibre mats: experimental characterisation and release kinetics modelling
Haroosh HJ, Dong Y, Lau KT |
| 6282 - 6289 |
Air-gap-enhanced pearlescent effect in periodic stratified bilayers of Perna viridis shell
Lertvachirapaiboon C, Jirapisitkul T, Pienpinijtham P, Wongravee K, Thammacharoen C, Ekgasit S |
| 6290 - 6301 |
Surface ligand influenced free radical protection of superparamagnetic iron oxide nanoparticles (SPIONs) toward H9c2 cardiac cells
Mohammad F, Yusof NA |
| 6302 - 6310 |
Impact of different silkworm dietary supplements on its silk performance
Nicodemo D, Oliveira JE, Sedano AA, Marconcini JM, Tonoli GHD |
| 6311 - 6320 |
The rheological behaviour of concentrated dispersions of graphene oxide
Valles C, Young RJ, Lomax DJ, Kinloch IA |
| 6321 - 6332 |
Densification of La0.6Sr0.4Co0.2Fe0.8O3 ceramic by flash sintering at temperature less than 100 A degrees C
Gaur A, Sglavo VM |
| 6333 - 6342 |
Enhanced thermomechanical properties of long and short glass fiber-reinforced polyamide 6,6/polypropylene mixtures by tuning the processing procedures
Kim N, Kim DY, Kim YJ, Jeong KU |
| 6343 - 6352 |
Synthesis and characterization of paclitaxel-imprinted nanoparticles for recognition and controlled release of an anticancer drug
Ishkuh FA, Javanbakht M, Esfandyari-Manesh M, Dinarvand R, Atyabi F |
| 6353 - 6362 |
Phase assembly and electrical conductivity of spark plasma sintered CeO2-ZrO2 ceramics
Poyato R, Cruz SA, Cumbrera FL, Moreno B, Chinarro E, Odriozola JA |
| 6363 - 6372 |
First-principles study of A-site substitution in ferroelectric bismuth titanate
Xue KH, Fonseca LRC, Nishi Y |
| 6373 - 6382 |
Simple one-step method to produce titanium dioxide-polycaprolactone composite films with increased hydrophilicity, enhanced cellular interaction and improved degradation for skin tissue engineering
Tran PA, Biswas DP, O'Connor AJ |
| 6383 - 6391 |
Synthesis, characterization and photocatalytic behavior of TiO2-SiO2 mesoporous composites in hydrogen generation from water splitting
Niphadkar PS, Chitale SK, Sonar SK, Deshpande SS, Joshi PN, Awate SV |
| 6392 - 6403 |
Enhanced photovoltaic performance of solar cell based on front-side illuminated CdSe/CdS double-sensitized TiO2 nanotube arrays electrode
Li Z, Yu LB, Liu YB, Sun SQ |
| 6404 - 6412 |
Swift heavy ion induced structural, optical and luminescence modification in NaSrBO3:Dy3+ phosphor
Bedyal AK, Kumar V, Sharma V, Singh F, Lochab SP, Ntwaeaborwa OM, Swart HC |
| 6413 - 6426 |
Phase stabilization principle and precipitate-host lattice influences for Al-Mg-Si-Cu alloy precipitates
Ehlers FJH, Wenner S, Andersen SJ, Marioara CD, Lefebvre W, Boothroyd CB, Holmestad R |
| 6427 - 6436 |
Tensile behaviour of multi-layered braided structures
Saraswat H, Rawal A, Singh R |
| 6437 - 6448 |
Nanofibrillated cellulose in wood coatings: mechanical properties of free composite films
Gruneberger F, Kunniger T, Zimmermann T, Arnold M |
| 6449 - 6458 |
Permeability of natural fiber reinforcement for liquid composite molding processes
Nguyen VH, Lagardere M, Park CH, Panier S |
| 6459 - 6466 |
Studies of ferroelectric and magnetic phase transitions in multiferroic PbFe0.5Ta0.5O3-PbTiO3 solid solution ceramics
Raevski IP, Titov VV, Malitskaya MA, Eremin EV, Kubrin SP, Blazhevich AV, Chen H, Chou CC, Raevskaya SI, Zakharchenko IN, Sarychev DA, Shevtsova SI |
| 6467 - 6474 |
An investigation into the relationship between processing, structure and properties for high-modulus PBO fibres: part 3: analysis of fibre microstructure using transmission electron microscopy
Kitagawa T, Yabuki K, Wright AC, Young RJ |
| 6475 - 6484 |
Alpha and deuteron irradiation effects on silica nanoparticles
Alessi A, Agnello S, Buscarino G, Cannas M, Gelardi FM, Sporea A, Sporea D, Vata I |
