| 12663 - 12678 |
Dendrimers as alternative templates and pore-directing agents for the synthesis of micro- and mesoporous materials
Nemanashi M, Noh JH, Meijboom R |
| 12679 - 12691 |
Morphologically modified surface with hierarchical micro-/nano-structures for enhanced bioactivity of titanium implants
Ren B, Wan Y, Wang GS, Liu ZQ, Huang Y, Wang HW |
| 12692 - 12703 |
Novel amphiphilic heparin-pluronic P123 copolymers exhibiting a great potential for Cisplatin delivery
Nguyen NT, Nguyen TH, Vu MT, Le VT, Nguyen XA, Nguyen TC, Nguyen TBT |
| 12704 - 12717 |
Moisture-triggered release of self-produced ClO2 gas from microcapsule antibacterial film system
Huang CX, Zhang BD, Wang SF, Zhang LY, Wang J, Huang XQ, Zhao Y, Huang LJ |
| 12718 - 12730 |
Synthesis of a carbon dioxide-based amphiphilic block copolymer and its evaluation as a nanodrug carrier
Li HC, Sui LL, Niu YS |
| 12731 - 12740 |
Converting waste coal fly ash into effective adsorbent for the removal of ammonia nitrogen in water
Chen XJ, Song HP, Guo YX, Wang L, Cheng FQ |
| 12741 - 12749 |
Influence of galia (Ga2O3) addition on the phase transformations and crystal growth behavior of zirconia (ZrO2)
Barad C, Kimmel G, Hayun H, Shamir D, Shandalov M, Shekel G, Gelbstein Y |
| 12750 - 12761 |
Synthesis and inkjet printing of sol-gel derived tin oxide ink for flexible gas sensing application
Kassem O, Saadaoui M, Rieu M, Sao-Joao S, Viricelle JP |
| 12762 - 12769 |
Dynamic scaling of internal bias field in Mn-doped 0.24Pb(In1/2Nb1/2)O-3-0.42Pb(Mg1/3Nb2/3)O-3-0.34PbTiO(3) ferroelectric ceramic
Qi XD, Sun EW, Li SY, Lu WM, Zhang R, Yang B, Cao WW |
| 12770 - 12780 |
Facile synthesis of the Ti3+-TiO2-rGO compound with controllable visible light photocatalytic performance: GO regulating lattice defects
Xu JJ, Chen YF, Dong ZY, Wang QK, Yue ST, Huang H |
| 12781 - 12794 |
Hybrid mineral@silsesquioxane particles for water remediation: synthesis, characterization and application as adsorbent of As(V) and other water pollutants
Waiman CV, dell'Erba IE, Chesta CA, Gomez ML |
| 12795 - 12806 |
One-step mechanochemical synthesis of plasmonic Ag/Zn-Al LDH with excellent photocatalytic activity
Li Z, Zhang QW, Liu XZ, Wu L, Hu HM, Zhao Y |
| 12807 - 12815 |
Effect of graphite structures on the productivity and quality of few-layer graphene in liquid-phase exfoliation
Mori F, Kubouchi M, Arao Y |
| 12816 - 12827 |
Mechanistic study of the reduction of MoO2 to Mo2C under methane pulse conditions
Bkour Q, Cuba-Torres CM, Marin-Flores OG, Tripathi S, Ravishankar N, Norton MG, Ha S |
| 12828 - 12836 |
Potassium-containing hydroxylated hydrotalcite as efficient catalyst for the transesterification of sunflower oil
Benedictto GP, Sotelo RM, Dalla Costa BO, Fetter G, Basaldella EI |
| 12837 - 12849 |
Synthesis of hierarchical titanium silicalite-1 in the presence of polyquaternium-7 and its application in the hydroxylation of phenol
Han ZZ, Shen Y, Wang FM, Zhang XB |
| 12850 - 12859 |
High-efficiency self-repairing anticorrosion coatings with controlled assembly microcapsules
Kong FH, Xu WC, Zhang XL, Wang X, Zhang Y, Wu JL |
| 12860 - 12870 |
A carbon nanotube/carbonaceous foam composite: simple preparation and potential application
Lei H, Cheng Q |
| 12871 - 12884 |
Electrochemical impedance study of water transportation in corona-aged silicone rubber: effect of applied voltage
Wang Z, Yin CS, Li JJ, Yang Y, Chen L, Luo Y, Liu Y, He CQ, Fang PF |
| 12885 - 12893 |
Preparation and characterization of glass fiber/polyimide/SiO2 composite aerogels with high specific surface area
Fei ZF, Yang ZC, Chen GB, Li KF, Zhao S, Su GH |
| 12894 - 12907 |
WO3 nanolamellae/reduced graphene oxide nanocomposites for highly sensitive and selective acetone sensing
Kaur J, Anand K, Anand K, Singh RC |
| 12908 - 12920 |
Effect of polymer-metal interaction and substrate temperature on the properties of vacuum-evaporated silver nanoparticulate films
Kakkrannaya AR, Rao KM, Tolpadi A, Sanjeev G, Pattabi M |
| 12921 - 12936 |
The study of external growth environments on the crystal morphology of epsilon-HNIW by molecular dynamics simulation
Lan GC, Jin SH, Li J, Wang JY, Li JX, Chen SS, Li LJ |
| 12937 - 12948 |
Surrogate models of the influence of the microstructure on the mechanical properties of closed- and open-cell foams
Marvi-Mashhadi M, Lopes CS, LLorca J |
| 12949 - 12960 |
Crystallization of electrically conductive visibly transparent ITO thin films by wavelength-range-specific pulsed Xe arc lamp annealing
Plumley JB, Cook AW, Larsen CA, Artyushkova K, Han SM, Peng TL, Kemp RA |
| 12961 - 12973 |
Role of vacancy defects on the lattice thermal conductivity in In2O3 thermoelectric nanocrystals: a positron annihilation study
He HF, Zhao B, Qi N, Wang B, Chen ZQ, Su XL, Tang XF |
| 12974 - 12987 |
Thin film deposition of organic hole transporting materials: optical, thermodynamic and morphological properties of naphthyl-substituted benzidines
Costa JCS, Mendes A, Santos LMNBF |
| 12988 - 12995 |
Size-controllable copper nanomaterials for flexible printed electronics
Zhang Y, Cui CQ, Yang B, Zhang K, Zhu PL, Li G, Sun R, Wong CP |
| 12996 - 13009 |
Magnetoresistive properties of thin nanostructured manganite films grown by metalorganic chemical vapour deposition onto glass-ceramics substrates
Zurauskiene N, Balevicius S, Stankevic V, Kersulis S, Klimantavicius J, Plausinaitiene V, Kubilius V, Skapas M, Juskenas R, Navickas R |
| 13010 - 13017 |
InAs0.9Sb0.1-based hetero-p-i-n structure grown on GaSb with high mid-infrared photodetection performance at room temperature
Tong JC, Tobing LYM, Qian L, Suo F, Zhang DH |
| 13018 - 13029 |
Fermi level engineering of metallicity-sorted metallic single-walled carbon nanotubes by encapsulation of few-atom-thick crystals of silver chloride
Kharlamova MV, Kramberger C, Domanov O, Mittelberger A, Yanagi K, Pichler T, Eder D |
| 13030 - 13041 |
Surface conductivity enhancement of H-terminated diamond based on the purified epitaxial diamond layer
Liu JL, Zheng YT, Lin LZ, Zhao Y, Chen LX, Wei JJ, Wang JJ, Guo JC, Feng ZH, Li CM |
| 13042 - 13052 |
K (x) Na1-x NbO3 perovskite thin films grown by pulsed laser deposition on R-plane sapphire for tunable microwave devices
Aspe B, Cisse F, Castel X, Demange V, Deputier S, Ollivier S, Bouquet V, Joanny L, Sauleau R, Guilloux-Viry M |
| 13053 - 13066 |
Structure and supercapacitor properties of few-layer low-fluorinated graphene materials
Pinakov DV, Chekhova GN, Okotrub AV, Asanov IP, Shubin YV, Fedorovskaya EO, Plyusnin PE, Bulusheva LG |
| 13067 - 13080 |
Thermal behavior of composite phase change materials based on polyethylene glycol and expanded vermiculite with modified porous carbon layer
Zhang XG, Qiao JX, Zhang WY, Cheng F, Yin ZY, Huang ZH, Min X |
| 13081 - 13089 |
Hybrid nanogenerator of BaTiO3 nanowires and CNTs for harvesting energy
Wang YP, Zhang X, Guo XB, Li D, Cui BS, Wu K, Yun JJ, Mao J, Xi L, Zuo YL |
| 13090 - 13099 |
Sponge-like porous Ni1.8Fe1.2O4 nanocubes as high-performance anodes for lithium-ion batteries
Ren HP, Deng YC, Zhao YL, Xing Z, Dong XY, Shi HX, Yin QX, Ju ZC |
| 13100 - 13110 |
Nitrogen-doped porous 3D graphene with enhanced supercapacitor properties
Sun HJ, Liu B, Peng TJ, Zhao XL |
| 13111 - 13125 |
Vertically aligned MnO2 nanosheets coupled with carbon nanosheets derived from Mn-MOF nanosheets for supercapacitor electrodes
Zhao KM, Xu ZQ, He Z, Ye GY, Gan QM, Zhou Z, Liu SQ |
| 13126 - 13142 |
A comparative study on the effect of different precursors for synthesis and efficient photocatalytic activity of g-C3N4/TiO2/bentonite nanocomposites
Mishra A, Mehta A, Kainth S, Basu S |
| 13143 - 13155 |
Mesoporous Co-N-C composite as a sulfur host for high-capacity and long-life lithium-sulfur batteries
Li J, Chen C, Qin FR, Jiang YJ, An H, Fang J, Zhang K, Lai YQ |
| 13156 - 13172 |
Polyurethane and polyaniline foam-derived nickel oxide-incorporated porous carbon composite for high-performance supercapacitors
Zhang J, Guo L, Meng QY, Wang WQ, Liu MH, Jin Z, Zhao K |
| 13173 - 13185 |
Influence of microstructure on thermal stability of ultrafine-grained Cu processed by equal channel angular pressing
Liang NN, Zhao YH, Li Y, Topping T, Zhu YT, Valiev RZ, Lavernia EJ |
| 13186 - 13202 |
Direct structure imaging of partially collapsed omega domains in phase-separated V-Ti alloy through atom column contrast interpretation
Ghosh C, Basu J, Dasgupta A, Divakar R |
| 13203 - 13215 |
In situ observation of deformation behavior of chain aggregate inclusions: a case study for Al2O3 at a liquid steel/argon interface
Mu WZ, Dogan N, Coley KS |
| 13216 - 13229 |
Digital inkjet functionalization of water-repellent textile for smart textile application
Yu JC, Seipel S, Nierstrasz VA |
| 13230 - 13242 |
Polymer composites with balanced dielectric constant and loss via constructing trilayer architecture
Zhang C, Shi ZC, Mao F, Yang CQ, Yang J, Zhu XT, Zuo H |
| 13243 - 13252 |
Polyphenylene sulfide microfiber membrane with superhydrophobicity and superoleophilicity for oil/water separation
Huang H, Liu M, Li Y, Yu Y, Yin XZ, Wu J, Chen SH, Xu J, Wang LX, Wang H |
| 13253 - 13263 |
Rapid and flexible actuation of droplets via a low-adhesive and deformable magnetically functionalized membrane
Chen G, Gao YB, Li MZ, Ji B, Tong R, Law MK, Wen WJ, Zhou BP |
| 13264 - 13279 |
Visible light-active hybrid film photocatalyst of polyethersulfone-reduced TiO2: photocatalytic response and radical trapping investigation
Hir ZAM, Abdullah AH, Zainal Z, Lim HN |
| 13280 - 13290 |
The behavior of semi-rigid polyurethane film based on functionalized rubber by one-shot and two-shot method preparation
Hirzin RSFN, Azzahari AD, Yahya R, Hassan A, Tahir H |
| 13291 - 13303 |
The introduction of asymmetric heterocyclic units into poly(p-phenylene terephthalamide) and its effect on microstructure, interactions and properties
Luo LB, Wang YZ, Dai Y, Yuan YH, Meng CB, Cheng Z, Wang X, Liu XY |
| 13304 - 13315 |
Synthesis and characterization of amine-modified spherical nanocellulose aerogels
Wang XY, Zhang Y, Wang SQ, Jiang H, Liu S, Yao Y, Zhang TM, Li Q |
| 13316 - 13316 |
Fabrication of high-strength polyoxymethylene fibers by gel spinning (vol 53, pg 11901, 2018)
Fang XD, Wyatt T, Shi J, Yao DG |
| 13317 - 13317 |
Zein-Laponite (R) nanocomposites with improved mechanical, thermal and barrier properties (vol 53, pg 7387, 2018)
Rouf TB, Schmidt G, Kokini JL |
