| 4261 - 4271 |
Synthesis of conducting nanowires
Banerjee S, Dan A, Chakravorty D |
| 4273 - 4277 |
FTIR investigation of structural modifications during low-temperature ageing of polycarbonate
Heymans N, Van Rossum S |
| 4279 - 4284 |
The importance of seasonal differences in the cellulose microfibril angle in softwoods in determining acoustic properties
Hori R, Muller M, Watanabe U, Lichtenegger HC, Fratzl P, Sugiyama J |
| 4285 - 4298 |
Unalloyed copper inclusions in ancient bronze artefacts
Bosi C, Garagnani GL, Imbeni V, Martini C, Mazzeo R, Poli G |
| 4299 - 4305 |
Direct electron microscopic observation of transcrystalline layers in microfibrillar reinforced polymer-polymer composites
Friedrich K, Ueda E, Kamo H, Evstatiev M, Krasteva B, Fakirov S |
| 4307 - 4313 |
A deformation processed beta-Ti+Y metal-metal composite
Wheelock PB, Wongpreedee K, Russell AM, Chumbley LS |
| 4315 - 4319 |
Metal oxide powder synthesized with amorphous metal chelates
Saitoh H, Satoh R, Nakamura A, Nambu N, Ohshio S |
| 4321 - 4326 |
Effects of surface treatments and size of fly ash particles on the compressive properties of epoxy based particulate composites
Kulkarni SM, Kishore |
| 4327 - 4332 |
Nitrogen pulsing to modify the properties of titanium nitride thin films sputter deposited
Martin N, Lintymer J, Gavoille J, Takadoum J |
| 4333 - 4341 |
Modelling the structure changes in quenchable steel subjected to grinding
Zarudi I, Zhang LC |
| 4343 - 4347 |
The preparation of porous perovskite membranes using BaTiO3 nanopowders
Battilana G, Bottino A, Capannelli G, Nanni P |
| 4349 - 4360 |
Formation and properties of ZnO nano-particles from gas phase synthesis processes
Kleinwechter H, Janzen C, Knipping J, Wiggers H, Roth P |
| 4361 - 4368 |
Oxidation behavior of Si-M-C-O fibers under wide range of oxygen partial pressures
Shimoo T, Morisada Y, Okamura K |
| 4369 - 4377 |
Crystallization behavior of calcium phosphate glass powder
Tosic MB, Dimitrijevic RZ, Mitrovic MM, Blagojevic NS |
| 4379 - 4384 |
Fabrication, mechanical properties and thermal stability of a novel glass matrix composite material reinforced by short oxycarbide fibres
Boccaccini AR, Liebald R, Beier W, Chawla KK |
| 4385 - 4390 |
The Al2O3-titanium adhesion in the view of the diffusion bonding process
Travessa D, Ferrante M |
| 4391 - 4398 |
Structural and magnetic properties of room temperature milled Co0.2Zn0.8Fe2O4 spinel oxide
Bhowmik RN, Ranganathan R |
| 4399 - 4403 |
Mechanical properties of Cr, Mn, Fe, Co, and Ni modified titanium trialuminides
Brandt C, Inal OT |
| 4405 - 4410 |
Suspension characteristics and rheological properties of mullite/zirconia powder in methyl isobutyl ketone
Park HC, Yang TY, Lee YB, Kim BK, Stevens R |
| 4411 - 4417 |
Microstructural modification to improve mechanical properties of a 70% Si3N4-30% BAS self-reinforced ceramic composite
Fang Y, Yu F, White KW |
| 4419 - 4424 |
Effect of atmosphere on superplastic deformation behavior in nanocrystalline liquid-phase-sintered silicon carbide with Al2O3-Y2O3 additions
Nagano T, Gu H, Zhan GD, Mitomo M |
| 4425 - 4430 |
Fracture behavior and biocompatibility evaluation of nylon-infiltrated porous hydroxyapatite
Nakahira A, Tamai M, Miki S, Pezzotti G |
| 4431 - 4436 |
Nanostructured cation distribution in FeNbO4: A synchrotron powder diffraction and transmission electron microscopy investigation
Theissmann R, Ehrenberg H, Weitzel H, Fuess H |
| 4437 - 4443 |
Residual stresses in particle-reinforced ceramic composites using synchrotron radiation
Lee M, Xiao YN, Wittmer DE, Graber TJ, Mini SM |
| 4445 - 4450 |
Crystallization and phase transformation behaviour of electroless nickel-phosphorus deposits with low and medium phosphorus contents under continuous heating
Keong KG, Sha W, Malinov S |
| 4451 - 4455 |
Dynamic recrystallization during hot compression of alpha-Fe
Kim KN, Lin Z, Lin JP, Wang YL |
| 4457 - 4463 |
Morphology and damping characteristics of woodceramics
Zhang D, Xie XQ, Fan TX, Okabe T, Hirose T |
| 4465 - 4472 |
Nitride synthesis using ammonia and hydrazine - a thermodynamic panorama
Jacob KT, Verman R, Mallya RM |
| 4473 - 4480 |
Microstructures and modification performance of melt-spun Al-10Sr alloy
Zhang ZH, Bian XF, Wang Y, Liu XF |
| 4481 - 4486 |
Solidification behaviors of the emulsified Al-4wt% Fe alloy powders
Seo HS, Yoon WY, Kim MH, Yoon EP, Kim KH |
| 4487 - 4491 |
The influence of moisture content on the mode I fracture behaviour of sprucewood
Reiterer A, Tschegg S |
| 4493 - 4498 |
A micro-mechanism based analysis for size-dependent indentation hardness
Gao YX, Fan H |
| 4499 - 4502 |
Effect of Sm substitution on the magnetic and electrical properties of Cu-Zn ferrite
Sattar AA, Samy AM |
