| 5081 - 5093 |
Microstructural evolution of silicon carbide aluminum oxide composites processed by melt oxidation
Guermazi M, Drew RAL |
| 5095 - 5102 |
Polyphenylethersulfone adhesive for EPDM elastomer-to-stainless steel joints in a hydrothermal environment
Sugama T |
| 5103 - 5110 |
Impedance spectroscopy of CuO-doped Y-TZP ceramics
Bowen C, Ramesh S, Gill C, Lawson S |
| 5111 - 5118 |
Theoretical assessment of the steady state diffusion cell test
Glass GK, Buenfeld NR |
| 5119 - 5124 |
Breakdown of agglomerates in ideal pastes during extrusion
Wildman RD, Blackburn S |
| 5125 - 5129 |
Hydrothermal synthesis of K4Nb6O17
Uchida S, Inoue Y, Fujishiro Y, Sato T |
| 5131 - 5136 |
Supersolidus liquid phase sintering of moulded metal components
Chan JL, Alcock JR, Stephenson DJ |
| 5137 - 5143 |
Statistical characteristics of grain boundary ensembles in variously textured copper
Mishin OV |
| 5145 - 5148 |
Low density polyethylene with an isocyanate functional group
Park SH, Lee JS, Suh KD |
| 5149 - 5156 |
Experimental methods for measuring the optimum amount of dispersant for seven Sumitomo alumina powders
Burke M, Greenwood R, Kendall K |
| 5157 - 5162 |
Metastable precipitation of YAlO3 in isothermally solidified YAG/(Al2O3-rich) spinel composites
Wang S, Yamamoto F, Akatsu T, Tanabe Y, Yasuda E |
| 5163 - 5167 |
A dielectric binary mixture formula with an interaction term
Leung CW, Tsui WL, Shin FG |
| 5169 - 5175 |
Interaction of Si3N4 with Ni-Cr alloy under N-2 or Ar atmosphere
Shimoo T, Okamura K, Itoh M |
| 5177 - 5183 |
Measurement of stress relaxation in broken fibers embedded in epoxy using Raman spectroscopy
Miyake T, Yamakawa T, Ohno N |
| 5185 - 5191 |
Stiffness as a function of moisture content in natural materials: Characterisation of hoof horn samples
Collins SN, Cope BC, Hopegood L, Latham RJ, Linford RG, Reilly JD |
| 5193 - 5204 |
The effects of diffusion on environmental stress crack initiation in PMMA
Arnold JC |
| 5205 - 5220 |
Eutectic solidification characteristics of Bridgman grown Al-3Fe-0.1V alloy
Wang Y, Jones H, Evans PV |
| 5221 - 5228 |
Analysis of the single-fiber fragmentation test
Lee S, Nguyen T, Chin J, Chuang TJ |
| 5229 - 5235 |
The manufacture and characterisation of single phase magnetite and haematite aligned fibres from an aqueous sol-gel process
Pullar RC, Pyke DR, Taylor MD, Bhattacharya AK |
| 5237 - 5241 |
Mechanical and thermal properties of Si-C-N material from polyvinylsilazane
Nishimura T, Haug R, Bill J, Thurn G, Aldinger F |
| 5243 - 5246 |
Processing and properties of carbon nanotubes-nano-SiC ceramic
Ma RZ, Wu J, Wei BQ, Liang J, Wu DH |
| 5247 - 5254 |
Use of emanation thermal analysis in characterization of the influence of grinding on textural and structural properties of nanosized titania powders
Real C, Criado JM, Balek V |
| 5255 - 5258 |
Microstructural analysis of the calcium aluminosilicate (CAS) glass-ceramic matrix in SiCf/CAS composites deformed at a high temperature
Sung YM, Hwang SJ |
| 5259 - 5264 |
Preparation of high-temperature filter by pressure-pulsed chemical vapour infiltration of SiC into carbonized paper-fibre preforms
Ohzawa Y, Hoshino H, Fujikawa M, Nakane K, Sugiyama K |
| 5265 - 5273 |
The kinetics of surface induced sinter crystallization and the formation of glass-ceramic materials
Gutzow I, Pascova R, Karamanov A, Schmelzer J |
