| 1101 - 1102 |
Guest Editor's Editorial: Preface to the special section on Materials Science in New Zealand
Staiger MP |
| 1103 - 1112 |
Nanogold and nanosilver composites with lignin-containing cellulose fibres
Johnston JH, Nilsson T |
| 1113 - 1118 |
Insights into the power law relationships that describe mass deposition rates during electrospinning
Stanger J, Tucker N, Fullick S, Sellier M, Staiger MP |
| 1119 - 1126 |
Effect of annealing on the structural, electrical and magnetic properties of Gd-implanted ZnO thin films
Murmu PP, Kennedy J, Ruck BJ, Williams GVM, Markwitz A, Rubanov S, Suvorova AA |
| 1127 - 1134 |
Evolution of the structure and magneto-optical properties of ion beam synthesized iron nanoclusters
Kennedy J, Leveneur J, Takeda Y, Williams GVM, Kupke S, Mitchell DRG, Markwitz A, Metson JB |
| 1135 - 1141 |
Nanoparticles of IrO2 or Sb-SnO2 increase the performance of iridium oxide DSA electrodes
Marshall AT, Haverkamp RG |
| 1142 - 1147 |
Complete desorption of interlayer hydrogen phosphate in Mg/Al-layered double hydroxides by means of anion exchange with 1-octanesulfonate
Shimamura A, Jones MI, Kanezaki E, Metson JB |
| 1148 - 1155 |
Effects of the molecular format of collagen on characteristics of electrospun fibres
Hofman K, Tucker N, Stanger J, Staiger M, Marshall S, Hall B |
| 1156 - 1163 |
Manipulation of electrospun fibres in flight: the principle of superposition of electric fields as a control method
Nurfaizey AH, Stanger J, Tucker N, Buunk N, Wallace A, Staiger MP |
| 1164 - 1170 |
Energy loss in a unidirectional flax-polyester composite subjected to multiple tensile load-unload cycles
Newman RH, Battley MA, Carpenter JEP, Le Guen MJ |
| 1171 - 1186 |
A critical review of all-cellulose composites
Huber T, Mussig J, Curnow O, Pang SS, Bickerton S, Staiger MP |
| 1187 - 1195 |
Moisture sorption and plasticization of bloodmeal-based thermoplastics
Verbeek CJR, Koppel NJ |
| 1196 - 1204 |
Studies on physicochemical characteristics of chitosan derivatives with dicarboxylic acids
Ghosh A, Ali MA |
| 1205 - 1216 |
Effects of amount and type of cation species on the phase formation of single and codoped alpha-SiAlONs
Kugler K, Ravlich I, Jones MI |
| 1217 - 1222 |
Synthesis of porous oxide ceramics using a soft responsive scaffold
Fournier AC, McGrath KM |
| 1223 - 1233 |
Tensile properties and fracture behaviour of an ultrafine grained Ti-47Al-2Cr (at.%) alloy at room and elevated temperatures
Nadakuduru VN, Zhang DL, Gabbitas B, Chiu YL |
| 1234 - 1243 |
Microstructural evolution during mechanical milling of Ti/Al powder mixture and production of intermetallic TiAl cathode target
Gabbitas B, Cao P, Raynova S, Zhang DL |
| 1244 - 1250 |
Effect of aluminium evaporation loss on pore characteristics of porous FeAl alloys produced by vacuum sintering
Chen G, Cao P, He YH, Shen PZ, Gao HY |
| 1251 - 1261 |
Effects of friction stir lap welding parameters on weld features on advancing side and fracture strength of AA6060-T5 welds
Yazdanian S, Chen ZW, Littlefair G |
| 1262 - 1267 |
An XPS study of the fluorination of carbon anodes in molten NaF-AlF3-CaF2
Haverkamp RG |
| 1268 - 1279 |
Diagnosing faults in aluminium processing by using multivariate statistical approaches
Abd Majid NA, Taylor MP, Chen JJJJ, Yu W, Young BR |
| 1280 - 1288 |
Thermo- and pH-sensitive behavior of hydrogels based on oligo (ethylene glycol) methacrylates and acrylic acid
Wang Y, Yuan ZC, Chen DJ |
| 1289 - 1295 |
Lowering the percolation threshold of polymer matrix composite by using raspberry-like carbon black/polystyrene composite particles
Bao YB, Wang JB, Xue PF, Li QY, Guo WH, Wu CF |
| 1296 - 1305 |
Effect of nanostructures on the exothermic reaction and ignition of Al/CuOx based energetic materials
Yang Y, Xu DG, Zhang KL |
| 1306 - 1318 |
Hot compressive deformation behavior of 7075 Al alloy under elevated temperature
Lin YC, Li LT, Fu YX, Jiang YQ |
| 1319 - 1330 |
Experimental investigation and thermodynamic assessment of the Mg-Zn-Gd system focused on Mg-rich corner
Qi HY, Huang GX, Bo H, Xu GL, Liu LB, Jin ZP |
| 1331 - 1338 |
Aging behavior of 359-type Al-9% Si-0.5% Mg casting alloys
Ammar HR, Samuel AM, Samuel FH, Al-Ahmari AMA |
| 1339 - 1347 |
Morphology and rheology of poly(L-lactide)/polystyrene blends filled with silica nanoparticles
Zhang M, Huang YJ, Kong MQ, Zhu H, Chen GL, Yang Q |
| 1348 - 1353 |
Preparation and characterisation of chromium-doped cobalt oxide spinel thin films
Vannier V, Schenk M, Kohse-Hoinghaus K, Bahlawane N |
| 1354 - 1364 |
Structure, infrared and Raman spectroscopic studies of new Sr0.50SbFe(PO4)(3) and SrSb0.50Fe1.50(PO4)(3) Nasicon phases
Aatiq A, Tigha MR, Benmokhtar S |
| 1365 - 1371 |
Effect of copper doping on physical properties of nanocrystallized SnS zinc blend thin films grown by chemical bath deposition
Akkari A, Reghima M, Guasch C, Kamoun-Turki N |
| 1372 - 1377 |
Sustained release of ethyl cellulose micro-particulate drug delivery systems prepared using electrospraying
Huang LY, Yu DG, Branford-White C, Zhu LM |
| 1378 - 1388 |
Effect of filler size and concentration on the structure and properties of poly(vinylidene fluoride)/BaTiO3 nanocomposites
Mendes SF, Costa CM, Caparros C, Sencadas V, Lanceros-Mendez S |
| 1389 - 1398 |
Analysis of scratch-induced damages in multi-layer packaging film systems
Hare BA, Moyse A, Sue HJ |
| 1399 - 1410 |
Avoiding error of determining the martensite finish temperature due to thermal inertia in differential scanning calorimetry: model and experiment of Ni-Ti and Cu-Al-Ni shape memory alloys
Kato H, Sasaki K |
| 1411 - 1417 |
Influence of hierarchical hybrid micro/nano-structured surface on biological performance of titanium coating
Xie YT, Zheng XB, Huang LP, Ding CX |
| 1418 - 1426 |
Thermal and electrical conductivity of Al(OH)(3) covered graphene oxide nanosheet/epoxy composites
Kim J, Im H, Kim JM, Kim J |
| 1427 - 1435 |
Microemulsion-based synthesis and luminescence of nanoparticulate CaWO4, ZnWO4, CaWO4:Tb, and CaWO4:Eu
Mai M, Feldmann C |
| 1436 - 1445 |
Well-organized 3D urchin-like hierarchical TiO2 microspheres with high photocatalytic activity
Xiang LQ, Zhao XP, Yin JB, Fan BL |
| 1446 - 1451 |
Sliding friction and wear behavior of Fe-based bulk metallic glass in 3.5% NaCl solution
Zenebe D, Yi S, Kim SS |
| 1452 - 1459 |
Effect of Pb (Yb1/2Nb1/2)O-3 on phase transition and thermal and electrical properties of PZ-PYbN solid solution on PZ-rich side
Sukkha U, Muanghlua R, Niemcharoen S, Boonchom B, Vittayakorn W, Vittayakorn N |
| 1460 - 1470 |
Microstructural characteristics and mechanical properties in laser beam welds of Ti6Al4V alloy
Liu H, Nakata K, Yamamoto N, Liao J |
| 1471 - 1479 |
CALPHAD formalism for Portland clinker: thermodynamic models and databases
de Noirfontaine MN, Tusseau-Nenez S, Girod-Labianca C, Pontikis V |
| 1480 - 1488 |
Performance of epoxy filled with nano- and micro-sized Magnesium hydroxide
Suihkonen R, Nevalainen K, Orell O, Honkanen M, Tang LC, Zhang H, Zhang Z, Vuorinen J |
| 1489 - 1496 |
Magnetic field-guided orientation of carbon nanotubes through their conjugation with magnetic nanoparticles
Kumar S, Kaur H, Kaur H, Kaur I, Dharamvir K, Bharadwaj LM |
| 1497 - 1503 |
Statistical description of the effect of Zr addition on the behavior of microcracks in Cu-6Ni-2Mn-2Sn-2Al Alloy
Goto M, Han SZ, Euh K, Kawagoishi N, Kim S, Kamil K |
| 1504 - 1513 |
Determination of local stress-strain properties of resistance spot-welded joints of advanced high-strength steels using the instrumented indentation test
Ullner C, Brauser S, Subaric-Leitis A, Weber G, Rethmeier M |
| 1514 - 1521 |
A cellular level biocompatibility and biosafety evaluation of mesoporous SiO2-based nanocomposite with lanthanum species
Guo WS, Luo Y, Wei K, Gao X |
| 1522 - 1530 |
Orientation study of iron phthalocyanine (FePc) thin films deposited on silicon substrate investigated by atomic force microscopy and micro-Raman spectroscopy
Szybowicz M, Makowiecki J |
| 1531 - 1540 |
Raman temperature dependence analysis of carbon-doped titanium dioxide nanoparticles synthesized by ultrasonic spray pyrolysis technique
Taziwa R, Meyer EL, Chinyama KG |
| 1541 - 1545 |
Synthesis and photoluminescence properties of the ZnO@SnO2 core-shell nanorod arrays
Tu YF, Fu QM, Sang JP, Zou XW |
| 1546 - 1553 |
Supercapacitive performance of hydrous ruthenium oxide (RuO2 center dot nH(2)O) thin films deposited by SILAR method
Deshmukh PR, Pusawale SN, Jagadale AD, Lokhande CD |
| 1554 - 1558 |
Textured BaTi2O5 ceramic synthesized by laser rapid solidification method and its dielectric properties
Zhang JJ, Yu JM, Chao MJ, Liang EJ, Li MY, Li DC |
| 1559 - 1561 |
Dielectric properties of Ba4Ti13O30 film prepared by laser chemical vapor deposition
Guo DY, Ito A, Goto T, Tu R, Wang CB, Shen Q, Zhang LM |
| 1562 - 1566 |
Synthesis, characterization and mechanical behaviour of an in situ consolidated nanocrystalline FeCrNi alloy
Gupta RK, Darling KS, Raman RKS, Ravi KR, Koch CC, Murty BS, Scattergood RO |
| 1567 - 1571 |
Atomic-scale imaging and analysis of single layer GP zones in a model steel
Danoix F, Epicier T, Vurpillot F, Blavette D |
| 1572 - 1577 |
Vacuum-tight sample transfer stage for a scanning electron microscopic study of stabilized lithium metal particles
Howe JY, Boatner LA, Kolopus JA, Walker LR, Liang CD, Dudney NJ, Schaich CR |
| 1578 - 1581 |
Structural and magnetic phase transitions in Bi1-xPrxFeO3 perovskites
Khomchenko VA, Troyanchuk IO, Karpinsky DV, Paixao JA |
| 1582 - 1587 |
Microstructure and mechanical properties of IF steel deformed during plane stress local torsion
Shamdani AH, Khoddam S, Thomson PF, Dehghan-Manshadi A |
| 1588 - 1593 |
Interface structure in a WC-Co alloy co-doped with VC and Cr3C2
Lay S, Loubradou M, Johansson SAE, Wahnstrom G |
| 1594 - 1597 |
Ultralow broadband optical reflection of silicon nanostructured surfaces coupled with antireflection coating
Liu Y, Hong MH |
| 1598 - 1602 |
On an effective approach for reducing TLP bonding time in single crystal superalloys
Ojo OA |
