| 1125 - 1138 |
Sensors and Techniques Used to Monitor Processing Parameters During Spray Atomization and Deposition
Lawrynowicz DE, Lavernia EJ |
| 1139 - 1143 |
Microstructure of Bulk Crystallized Linear Polyethylene - Correlation of Microhardness and Yield Stress
Calleja FJ, Giri L, Ward IM, Cansfield DL |
| 1144 - 1150 |
3-Dimensional Cellular-Automaton Models of Microstructural Evolution During Solidification
Brown SG, Bruce NB |
| 1151 - 1157 |
A Study of the Abrasive Wear in the Polishing of Polypropylene Using X-Ray Photoelectron-Spectroscopy
Castle JE, Feliu S |
| 1158 - 1165 |
Some Properties of Mullite Powders Prepared by Chemical-Vapor-Deposition .1. Preparation of Mullite Powder
Itatani K, Kubozono T, Howell FS, Kishioka A, Kinoshita M |
| 1166 - 1172 |
Effects of Tensile and Compressive Stresses on the Passive Layers Formed on a Type-302 Stainless-Steel in a Normal Sulfuric-Acid Bath
Navai F |
| 1173 - 1179 |
Mechanical-Properties of Monolithic AlN and Sicw/AlN Composites
Unni CK, Gordon DE |
| 1180 - 1186 |
Nitridation Characteristics of Floating Aluminum Powder
Chang AJ, Rhee SW, Baik S |
| 1187 - 1195 |
Microstructure of Quenched and Annealed Films of Isotactic Polypropylene .1.
Alberola N, Fugier M, Petit D, Fillon B |
| 1196 - 1202 |
Some Properties of Mullite Powders Prepared by Chemical-Vapor-Deposition .2. Sinterability
Itatani K, Kubozono T, Howell FS, Kishioka A, Kinoshita M |
| 1203 - 1208 |
Silver-Palladium Submicronic Powders .2. Structural Characterization
Yala F, Delarue E, Delcourt MO, Haut C, Severac C, Grattepain C |
| 1209 - 1216 |
Microwave Characteristics of Mixed Phases of Bati4O9-Bapr2Ti4O12 Ceramics
Fukuda K, Kitoh R, Awai I |
| 1217 - 1224 |
Electrode Configurations and Impedance Spectra of Cement Pastes
Ford SJ, Mason TO, Christensen BJ, Coverdale RT, Jennings HM, Garboczi EJ |
| 1225 - 1232 |
Dynamic-Mechanical Properties of Carbon-Carbon Composites
Chang WC, Tai NH, Ma CC |
| 1233 - 1239 |
Interfacial Reaction of Alumina with Ag-Cu-Ti Alloy
Hao HG, Wang YL, Jin ZH, Wang XT |
| 1240 - 1244 |
Preparation of Alumina and Alumina-Silica Powders by Wire Explosion Resulting from Electric-Discharge
Umakoshi M, Yoshitomi T, Kato A |
| 1245 - 1250 |
Nonstoichiometry and Physical-Properties of the Perovskite Baxla1-Xfeo3-Y System
Roh KS, Ryu KH, Yo CH |
| 1251 - 1258 |
Mode-II Fracture Tests on Fiber-Reinforced Plastics
Tschegg EK, Humer K, Weber HW |
| 1259 - 1265 |
Effect of pH and Hydrogen-Peroxide in Radioactive Water on the Passivity of 1018-Carbon-Steel
Bellanger G |
| 1266 - 1272 |
Mechanical Fatigue of Epoxy-Resin
Nagasawa M, Kinuhata H, Koizuka H, Miyamoto K, Tanaka T, Kishimoto H, Koike T |
| 1273 - 1276 |
Structure and Electrical-Properties of Vacuum-Deposited Antimony Telluride Thin-Films on an Amorphous Substrate
Elmandouh ZS |
| 1277 - 1282 |
Measurement of Residual-Stresses in Al2O3/Ni Laminated Composites Using an X-Ray-Diffraction Technique
Hehn L, Zheng C, Mecholsky JJ, Hubbard CR |
| 1283 - 1289 |
Theory of the Enhancement Factors of Solute Diffusion in Dilute Bcc Solid-Solutions
Fuks D, Segel V, Pelleg J |
| 1290 - 1294 |
Hydrogen Trapping in an Al-2.1 Wt-Percent Li Alloy
Iijima Y, Yoshida S, Saitoh H |
| 1295 - 1301 |
Liquid-Phase Bonding of Yttria-Stabilized Zirconia with CaO-TiO2-SiO2 Glass
Chiou BS, Young CD, Duh JG |
| 1302 - 1306 |
Mechanical-Behavior of Block-Copolymers of Polyurethane with Poly (4,4’-Diphenylsulphone Terephthalamide)
Lin MF, Wang HH, Shiao KR |
| 1307 - 1312 |
Dynamic Recovery and Recrystallization in a Cold-Rolled Ultra-Low Carbon-Steel Plate - A Neutron and X-Ray-Diffraction Study
Brand PC, Helmholdt RB, Pathiraj B, Kolster BH |
| 1313 - 1320 |
Effects of Manganese Dispersoid on the Mechanical-Properties in Al-Zn-Mg Alloys
Park DS, Nam SW |
| 1321 - 1326 |
Sintering and Compensation Effect of Donor and Acceptor Codoped 3Mol-Percent Y2O3-ZrO2
Chen SY, Lu HY |
| 1327 - 1332 |
The Application of the Etch-Pit Method to Quantitative Texture Analysis
Lee KT, Dewit G, Morawiec A, Szpunar JA |
| 1333 - 1337 |
Effect on the Grain Interior and Grain-Boundary Reactions by Cr Addition to Low Gold Content Alloys
Kawashima I, Ohno H, Araki Y |
| 1338 - 1342 |
In-Situ Reacted TiB2-Reinforced Mullite
Ho CT |
| 1343 - 1351 |
Improvement in Hydrogen Storage Characteristics of Magnesium by Mechanical Alloying with Nickel
Song MY |
| 1352 - 1356 |
The Influence of Stacking-Fault Energy on the Creep-Behavior of Ni-Cu-Solid-Solution Alloys at Intermediate Temperatures
Soliman MS |
| 1357 - 1360 |
Direct Observation of Nonuniform Distribution of PVA Binder in Alumina Green Body
Zhang Y, Uchida N, Uematsu K |
| 1361 - 1366 |
Stability of Lead Magnesium Niobate Under Hydrothermal Conditions
Yanagisawa K |
| 1367 - 1372 |
Characterization of a New Mixed-Oxide Catalyst Derived from Hydrogen Storage Alloy
Chikamatsu N, Tagawa T, Goto S |
| 1373 - 1378 |
Slurry Processing for Fabrication of SiC Whisker-Reinforced Si3N4 Composites
Sato Y, Ueki M, Shintani K |
| 1379 - 1385 |
Investigation of Equilibrium and Phase-Stability in the Liquid-Solid State in Nickel-Based Wrought Superalloys
Rosen GI, Dirnfeld SF, Bamberger M, Prinz B |
| 1386 - 1390 |
Antiferroelectric Lead Zirconate Thin-Films Derived from Acetate Precursors
Li KK, Wang F, Haertling GH |
| 1391 - 1396 |
Perovskite Phase-Formation in the Pbmg1/3Nb2/3O3-Pbzro3-PbTiO3 System by the Columbite Route
Villegas M, Jurado JR, Moure C, Duran P |
