| 1107 - 1115 |
Ultrasonic determination of the elastic and nonlinear acoustic properties of transition-metal carbide ceramics: TiC and TaC
Dodd SP, Cankurtaran M, James B |
| 1117 - 1121 |
Microstructure and fracture toughness of liquid-phase-sintered beta-SiC containing beta-SiC whiskers as seeds
Kim SH, Kim YW, Mitomo M |
| 1123 - 1134 |
Indications that the yield point at constant strain rate and the inception of tertiary creep are manifestations of the same failure criterion using the universal viscoelastic model
Sudduth RD |
| 1135 - 1137 |
Theoretical estimation of coefficient of thermal expansion for solder alloy
Lee BK, Jin HM, Wu P |
| 1139 - 1145 |
A comparative study of the electrochemical behaviour of Algerian zinc and a zinc from a commercial sacrificial anode
Sonatrach MB, Salhi E, Sonatrach KB, Ghali E, Lepmi FD |
| 1147 - 1151 |
Influence of an electric field on the microstructures and properties of the friction-welded joint of LY12 alloy
Fu L, Du SG, Jie WQ |
| 1153 - 1159 |
Fatigue behaviour of beta Ti-22V-4Al alloy subjected to surface-microstructural modification
Tokaji K, Takafuji S, Ohya K, Kato Y, Mori K |
| 1161 - 1169 |
Nanocrystalline microstructures in Fe93-xZr7Bx alloys
Xiong XY, Finlayson TR, Muddle BC |
| 1171 - 1174 |
Electrical properties of non c-axis oriented SrBi2(Ta0.95V0.05) O-2(9) thin films
Das RR, Bhattacharya P, Perez W, Katiyar RS |
| 1175 - 1178 |
The origin of photoluminescence in amorphous lead titanate
Leite ER, Paris EC, Pontes FM, Paskocimas CA, Longo E, Sensato F, Pinheiro CD, Varela JA, Pizani PS, Campos CEM, Lanciotti F |
| 1179 - 1184 |
Synthesis of Mg-Ti alloy by mechanical alloying
Liang G, Schulz R |
| 1185 - 1194 |
Damage zone interaction due to non-oriented Vickers indentations on brittle materials
Zhang W, Subhash G |
| 1195 - 1201 |
A model for austenitisation of hypoeutectoid steels
Gaude-Fugarolas D, Bhadeshia HKDH |
| 1203 - 1218 |
Effect of alloying elements on the segregation and dissolution of CuAl2 phase in Al-Si-Cu 319 alloys
Li Z, Samuel AM, Samuel FH, Ravindran C, Valtierra S |
| 1219 - 1229 |
Effect of the addition of Ca2+ on the structure, microstructure and ferroelectric properties of (Pb1-yCay)(Zr0.8Ti0.2)O-3 system with y=0.0, 0.02, 0.05 and 0.1
Beitollahi A |
| 1231 - 1238 |
Effect of a machining-induced defect on the tensile strength of a 3D composite material
Davy C, Marquis D |
| 1239 - 1242 |
Alumina coating on quartz glass and nickel substrates using aqueous sol derived from AlCl3 center dot 6H(2)O
Ishizaka T, Kobayashi Y, Kurokawa Y |
| 1243 - 1248 |
Preparation and optical properties of gold nanoparticles embedded in barium titanate thin films
Yang Y, Shi JL, Huang WM, Dai SG, Wang L |
| 1249 - 1254 |
Metal catalysed intumescence: characterisation of the thermal decomposition of calcium gluconate monohydrate
Labuschagne FJWJ, Focke WW |
| 1255 - 1267 |
Influence of oxides on porosity formation in Sr-treated Al-Si casting alloys
Liu L, Samuel AM, Samuel FH, Doty HW, Valtierra S |
| 1269 - 1279 |
A study of Sn-Bi-Ag-(In) lead-free solders
Shiue RK, Tsay LW, Lin CL, Ou JL |
| 1281 - 1287 |
Mechanical properties of copper to titanium joined by friction welding
Kim SY, Jung SB, Shur CC, Yeon YM, Kim DU |
| 1289 - 1294 |
Specific analysis of EBSD data to study the texture inheritance due to the beta ->alpha phase transformation
Gey N, Humbert M |
| 1295 - 1300 |
Electrical properties of ferroelectric SBT thin films prepared using photosensitive sol-gel solution
Park TH, Yang KH, Kang DK, Lim TY, Auh KH, Kim BH |
| 1301 - 1306 |
Interaction between a dislocation and an impurity in KCl: Mg2+ single crystals
Kohzuki Y, Ohgaku T |
| 1307 - 1313 |
Study of the corrosion layer on iron obtained in solutions of water-polyethylene glycol (PEG 400)-sodium phosphate
Gourbeyre Y, Guilminot E, Dalard F |
| 1315 - 1319 |
Magneto-optical properties of obliquely evaporated Ni films
Otiti T |
| 1321 - 1331 |
Chemically induced residual stresses in dental composites
Lingois P, Berglund L, Greco A, Maffezoli A |
| 1333 - 1338 |
Effect of the surface oxide layer on transformation behavior and shape memory characteristics of Ti-Ni and Ti-Ni-Mo alloys
Nam TH, Chung DW, Lee HW, Kim JH, Choi MS |
| 1339 - 1346 |
Characterization and adsorption properties of powders prepared from cactus pulp
Corro-Hernandez G, Elizalde-Gonzalez MP, Davila-Jimenez MM |
| 1347 - 1351 |
Magnetic alignment of particles in composite films
Breval E, Klimkiewicz M, Shi YT, Arakaki D, Dougherty JP |
| 1353 - 1358 |
Coolant pH control for optimum ceramic grinding - Part II -Influence of the rebinder effect on the surface grinding of aluminum oxide
Alley DW, Devereux OF |
| 1359 - 1364 |
Grain boundary devitrification of Ca alpha-sialon ceramics and its relation with the fracture toughness
Zhang Y, Cheng YB |
