| 1875 - 1878 |
Co-electrodeposition and characterization of Cu (In, Ga)Se-2 thin films
Xia DL, Xu M, Li JZ, Zhao XJ |
| 1879 - 1886 |
Assessment of wood load condition by near infrared (NIR) spectroscopy
Andre N, Labbe N, Rials T, Kelley S |
| 1887 - 1892 |
Characteristics of brush plated ZnTe thin films
Murali K, Ziaudeen M, Jayaprakash N |
| 1893 - 1903 |
In-situ acidification of electrosterically dispersed alumina suspensions: Effect of coagulant structure
Binner JGP, McDermott A |
| 1905 - 1909 |
Relationship between trapping density and open circuit voltage in multicrystalline silicon solar cells
Wang H, Yang H, Wu HC, Yu HC |
| 1911 - 1915 |
Tribochemical interactions of piston ring coatings with molybdenum dithiocarbomate friction modifier
Zhang RJ, Li SH, Jin YS |
| 1917 - 1925 |
A study on the microstructural changes in hot rolling of dual-phase steels
Salehi AR, Serajzadeh S, Taheri AK |
| 1927 - 1932 |
Photoinduced non-linear optical effects in lanthanum calcium borate single crystals
Reshak AH, Auluck S, Kityk IV, Majchrowski A, Kasprowicz D, Drozdowski M, Kisielewski J, Lukasiewicz T, Michalski E |
| 1933 - 1938 |
beta-SiALON obtained from carbothermal reduction of kaolinite employing sample controlled reaction temperature (SCRT)
Alcala MD, Criado JM, Gotor FJ, Real C |
| 1939 - 1943 |
Solution combustion synthesis of nano particle La0.9Sr0.1MnO3 powder by a unique oxidant-fuel combination and its characterization
Saha S, Ghanawat SJ, Purohit RD |
| 1945 - 1952 |
Effect of Mg content and solution treatment on the microstructure of Al-Si-Cu-Mg alloys
Alfonso I, Maldonado C, Gonzalez G, Bedolla A |
| 1953 - 1957 |
A new look at oxygen pumping characteristics of BICUVOX.1 solid electrolyte
Paydar MH, Hadian AM, Fafilek G |
| 1959 - 1964 |
Ex-cellulose carbon fibres with improved mechanical properties
Plaisantin H, Pailler R, Guette A, Birot M, Pillot JP, Daude G, Olry P |
| 1965 - 1972 |
Fabrication of semi-conductive ceramics by combination of gelcasting and reduction sintering
Takahashi M, Adachi K, Menchavez RL, Fuji M |
| 1973 - 1978 |
Preparation and characterization of polymer/inorganic nanoparticle composites through electron irradiation
Wang ZG, Zu XT, Xiang X, Lian J, Wang LM |
| 1979 - 1982 |
Effect of degree of saponification on properties of films obtained from PVA/NaCl/H2O system
Iwaseya M, Katsuyama N, Yamaura K, Dai LX |
| 1983 - 1990 |
Synthesis and characterization of poly (aniline-co-o-anisidine-co-o-toluidine) thin films in inorganic and organic supporting electrolytes
Borole DD, Kapadi UR, Mahulikar PP, Hundiwale DG |
| 1991 - 1997 |
Effect of NaBr on the corrosion of cold rolled steel in 1.0 M phosphoric acid
Tang LB, Li XM, Liu HM, Mu GN, Liu GG |
| 1999 - 2007 |
A comparative analysis of copper and brass surface films in contact with tap water
Valcarce M, De Sanchez SR, Vazquez M |
| 2009 - 2017 |
Effects of calcium nitride and calcium carbonate gasifying agents on the combustion synthesis of Ni3Ti-TiC composites
Burkes DE, Yi HC, Gottoli G, Moore JJ |
| 2019 - 2023 |
Electrical and optical properties of Indium sesquitelluride (In2Te3) thin films
Desai RR, Lakshminarayana D, Patel PB, Panchal CJ |
| 2025 - 2030 |
Structural and surface propperties of Ni-Cu nanoparticles supported on SiO2
Boudjahem AG, Pietrowski M, Monteverdi S, Mercy M, Bettahar MM |
| 2031 - 2036 |
Coating of bioactive glass 13-93 fibres with biomedical polymers
Pirhonen E, Tormala P |
| 2037 - 2043 |
Electrical properties of flexible polypropylene based cable insulation materials
Chang FG |
| 2045 - 2053 |
EPR and optical absorption studies of Cr3+ ions in alkaline earth alumino borate glasses
Kumar VR, Rao JL, Gopal NO |
| 2055 - 2057 |
Study on electrorheological properties of novel polymer-Ce4+ complex
Song XR, Lin YB |
| 2059 - 2065 |
Corrosion properties of plasma-sprayed Al2O3-TiO2 coatings on Ti metal
Song YS, Lee IG, Hong SN, Kim BY, Lee KH, Lee DY |
| 2067 - 2073 |
Preparation of nanocrystalline TiO2 porous films from terpineol-ethanol-PEG system
Bu SJ, Jin ZG, Liu XX, Yin T, Cheng ZJ |
| 2075 - 2085 |
Lead-strontium titanate glass ceramics: I - crystallization and microstructure
Sahu AK, Kumar D, Parkash O |
| 2087 - 2096 |
Lead-strontium titanate glass ceramics: II-dielectric behaviour
Sahu AK, Kumar D, Parkash O, Thakur OP, Prakash C |
| 2097 - 2112 |
Effect of nitrogen addition on the microstructure and mechanical behavior of 317L and 904L austenitic stainless steel welds
Nage DD, Raja VS, Raman R |
| 2113 - 2120 |
An experimental technique to evaluate the effective thermal conductivity of Y2O3 stabilized ZrO2 coatings
An K, Han MK |
| 2121 - 2131 |
Damage and loading rate effects on the microfailure behaviour of Al2O3-ceramics studied by SEM
Kytopoulos VN, Papadopoulos GA, Sadowski T |
| 2133 - 2135 |
Effect of titanium ion implantation on the corrosion behavior of zircaloy-4
Wan Q, Bai XD, Liu XY |
| 2137 - 2139 |
Synthesis and electronic behaviors of alternating indium-organic moiety binary hybrid copolymer
Matsui H, Kudo R, Kimura M, Yoshihara M |
| 2141 - 2144 |
Electrochemical synthesis of nanosized hydroxyapatite
Montero ML, Saenz A, Rodriguez JG, Arenas J, Castano VM |
| 2145 - 2150 |
Infrared brazing of Ti-6Al-4V using the Ti-15Cu-15Ni braze alloy
Chang CT, Shiue RK |
| 2151 - 2153 |
Correlation of cavitation erosion resistance and mechanical properties of some engineering steels
Chen WG, Gu CQ, Zhao K, Shen FS |
| 2155 - 2156 |
Solid state-reaction between Ir and Al2O3
Hua YF, Chen ZF, Zhang LT, Cheng LF |
| 2157 - 2159 |
Conductive percolation threshold of conductive-insulating granular composites
Ren L, Tong J, Chen D, He D, Han Z, Li J |
| 2161 - 2163 |
Preparation and growth mechanism of AlN whiskers by combustion synthesis with Y2O3 as additive
Li WK, Zhang BL, Zhuang HR, Li WL |
| 2165 - 2166 |
Surface observation of LaNiO3/MgO (100) structure
Kim BH, An JH, Hwang KS |
