| 2109 - 2113 |
Formation of WC powders using carbon coated precursors
Swift GA, Koc R |
| 2115 - 2120 |
Mechanical properties of HDPE/magnesium hydroxide composites
Ulutan S, Gilbert M |
| 2121 - 2130 |
Time and temperature dependence of the scratch properties of poly(methylmethacrylate) surfaces
Gauthier C, Schirrer R |
| 2131 - 2138 |
Microstructural changes to metal bond coatings on gas turbine alloys with time at high temperature
Russell NV, Wigley F, Williamson J |
| 2139 - 2143 |
Synthesis and characterization of an active styrlthiophene monomer and its polyurethane with second-order optical nonlinearity
Wang JH, Shen YQ, Shi ZW |
| 2145 - 2154 |
High-performance polymer coatings for carbon steel heat exchanger tubes in geothermal environments
Sugama T, Webster R, Reams W, Gawlik K |
| 2155 - 2165 |
Synthesis, microstructure and properties characterization of disintegrated melt deposited Mg/SiC composites
Gupta M, Lai MO, Saravanaranganathan D |
| 2167 - 2173 |
The role of silicon in wetting and pressureless infiltration of SiCp preforms by aluminum alloys
Pech-Canul MI, Katz RN, Makhlouf MM, Pickard S |
| 2175 - 2183 |
Characterization and comparative study of three-dimensional braided hybrid composites
Kostar TD, Chou TW, Popper P |
| 2185 - 2192 |
Interaction of Ag ions with a vanadium pentoxide hydrate -Formation of silver vanadate at low temperature
Kittaka S, Yata Y, Matsuno K, Nishido H |
| 2193 - 2199 |
Effect of the pressure of sputtering atmosphere on the physical properties of amorphous aluminum oxide films
Kijima Y, Hanada T |
| 2201 - 2207 |
Reaction bonded niobium carbide ceramics from polymer-filler mixtures
Dernovsek O, Bressiani JC, Bressiani AHA, Acchar W, Greil P |
| 2209 - 2213 |
Carbon nitride films on diamond layers and their thermal behavior
Guo JD, Ma XC, Zhao RW, Wang EG |
| 2215 - 2227 |
Characterization and tribological evaluation of duplex treatment by depositing carbon nitride films on plasma nitrided Ti-6Al-4V
Fu YQ, Wei J, Yan BB, Loh NL |
| 2229 - 2233 |
Thermal stability and mechanical performance of multiply heat-treated alpha-sialon ceramics densified with rare earth oxides
Liu Q, Gao L, Yan DS, Thompson DP |
| 2235 - 2240 |
Simulation and investigation of pore size graded titania layers during sintering
Moritz T, Riedel H, Werner G, Tomandl G |
| 2241 - 2244 |
Investigation of phase formation of RFe11V1-xTix (R = Pr, Ce) compounds
Tang SL, Lui LY, Jin ZQ, Zhang JR, Zhang SY, Du YW |
| 2245 - 2253 |
Effects of aging temperature on the microstructure and mechanical properties of 1.8Cu-7.3Ni-15.9Cr-1.2Mo-low C, N martensitic precipitation hardening stainless steel
Nakagawa H, Miyazaki T, Yokota H |
| 2255 - 2262 |
Physical properties of some iron based alloys in liquid and amorphous states
Sidorov VE, Calvo-Dahlborg M, Dahlborg U, Popel PS, Chernoborodova S |
| 2263 - 2271 |
The effect of supercooling on the microstructure of Al-Nb alloys
Munitz A, Gokhale AB, Abbaschian R |
| 2273 - 2277 |
Interaction between a dislocation and impurities in KCl doped with Li+ or Na+
Kohzuki Y |
| 2279 - 2289 |
Interlayer structure of carbon fibre reinforced aluminium wires
Pippel E, Woltersdorf J, Doktor M, Blucher J, Degischer HP |
| 2291 - 2295 |
The effect of decomposition on crystallization in Zr41Ti14Cu12.5Ni10Be22.5 bulk metallic glass
Wang WH, Wei Q, Friedrich S |
| 2297 - 2303 |
The effect of surface treatment on the performance improvement of carbon fiber/polybenzoxazine composites
Jang JS, Yang HJ |
| 2305 - 2310 |
Optical and electrical properties of soluble copolymers of pyrrole-thiophene-3-decylthiophene
Czerwinski W, Wrzeszcz G, Kania K, Rabek JF, Linden LA |
| 2311 - 2317 |
Influence of the niobium dopant concentration on the Pb(Zr0.54Ti0.46)O-3 ceramics sintering and final properties
Durruthy MD, Fuentes L, Hernandez M, Camacho H |
| 2319 - 2323 |
Structure and properties of PP/CaSO4 composite - Part III: Effect of the filler grade on properties
Saujanya C, Radhakrishnan S |
| 2325 - 2329 |
Effects of TiO2 addition on the superconducting properties of Bi-Sr-Ca-Cu-O system
Hamid NA, Abd-Shukor R |
| 2331 - 2345 |
Microstructural study of two LAS-type glass-ceramics and their parent glass
Arnault L, Gerland M, Riviere A |
| 2347 - 2351 |
Shock response of stainless steel at high temperature
Gu ZW, Jin XG, Gao GQ |
| 2353 - 2359 |
Numerical method of thermal shock resistance estimation by quenching of samples in water
Lanin AG, Tkachev AL |
| 2361 - 2369 |
The abrasive corrosion behavior of plasma-nitrided alloy steels in chloride environments
Lee CK, Shih HC |
