| 2915 - 2916 |
Untitled
Lukey GC, Palomo A, Provis JL, van Deventer JSJ |
| 2917 - 2933 |
Geopolymer technology: the current state of the art
Duxson P, Fernandez-Jimenez A, Provis JL, Lukey GC, Palomo A, van Deventer JSJ |
| 2934 - 2943 |
Alkali activation of metakaolins: parameters affecting mechanical, structural and microstructural properties
Granizo ML, Blanco-Varela MT, Martinez-Ramirez S |
| 2944 - 2952 |
Directed synthesis of alkaline aluminosilicate minerals in a geocement matrix
Krivenko PV, Kovalchuk GY |
| 2953 - 2957 |
Dissolution properties of some fly ash fillers applying to geopolymeric materials in alkali solution
Mikuni A, Komatsu R, Ikeda K |
| 2958 - 2966 |
Opc-fly ash cementitious systems: study of gel binders produced during alkaline hydration
Palomo A, Fernandez-Jimenez A, Kovalchuk G, Ordonez LM, Naranjo MC |
| 2967 - 2973 |
Dissolution of aluminosilicate minerals and by-products in alkaline media
Panagiotopoulou C, Kontori E, Perraki T, Kakali G |
| 2974 - 2981 |
Direct measurement of the kinetics of geopolymerisation by in-situ energy dispersive X-ray diffractometry
Provis JL, van Deventer JSJ |
| 2982 - 2996 |
Reaction mechanism, kinetics and high temperature transformations of geopolymers
Rahier H, Wastiels J, Biesemans M, Willlem R, Van Assche G, Van Mele B |
| 2997 - 3006 |
Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: Part I - Low Si/Al ratio systems
Weng L, Sagoe-Crentsil K |
| 3007 - 3014 |
Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: Part II. High Si/Al ratio systems
Sagoe-Crentsil K, Weng L |
| 3015 - 3023 |
Semi-empirical AM1 calculations on 6-memebered alumino-silicate rings model: implications for dissolution process of metakaoline in alkaline solutions
Zhang YS, Sun W |
| 3024 - 3032 |
Alkali-activated metakaolin-slag blends - performance and structure in dependence of their composition
Buchwald A, Hilbig H, Kaps C |
| 3033 - 3043 |
The influence of calcium content on the structure and thermal performance of fly ash based geopolymers
Dombrowski K, Buchwald A, Weil M |
| 3044 - 3054 |
Physical evolution of Na-geopolymer derived from metakaolin up to 1000 degrees C
Duxson P, Lukey GC, van Deventer JSJ |
| 3055 - 3065 |
Durability of alkali-activated fly ash cementitious materials
Fernandez-Jimenez A, Garcia-Lodeiro I, Palomo A |
| 3066 - 3072 |
Erosion of geopolymers made from industrial waste
Goretta KC, Gutierrez-Mora F, Singh D, Routbort JL, Lukey GC, van Deventer JSJ |
| 3073 - 3082 |
Geopolymerisation of low calcium ferronickel slags
Komnitsas K, Zaharaki D, Perdikatsis V |
| 3083 - 3091 |
Geopolymer matrices with improved hydrothermal corrosion resistance for high-temperature applications
Nair BG, Zhao Q, Cooper RF |
| 3092 - 3098 |
MAS-NMR studies of geopolymers heat-treated for applications in biomaterials field
Oudadesse H, Derrien AC, Lefloch M, Davidovits J |
| 3099 - 3106 |
Influence of curing schedule on the integrity of geopolymers
Perera DS, Uchida O, Vance ER, Finnie KS |
| 3107 - 3116 |
Bond performance of reinforcing bars in inorganic polymer concrete (IPC)
Sofi M, van Deventer JSJ, Mendis PA, Lukey GC |
| 3117 - 3123 |
Thermo-mechanical and microstructural characterisation of sodium-poly(sialate-siloxo) (Na-PSS) geopolymers
van Riessen A |
| 3124 - 3130 |
Fly ash-based geopolymer concrete: study of slender reinforced columns
Sumajouw DMJ, Hardjito D, Wallah SE, Rangan BV |
| 3131 - 3137 |
Novel geopolymer based composites with enhanced ductility
Zhao Q, Nair B, Rahimian T, Balaguru P |
| 3138 - 3154 |
LLDPE's grown with Metallocene and Ziegler-Natta catalysts: events in the melt and FTIR analysis
Ferhat-Hamida Z, Phuong-Nguyen H, Bernazzani P, Haine A, Delmas G |
| 3155 - 3160 |
TEM observations of particles obtained by electro-erosion in kerosene
Cabanillas ED |
| 3161 - 3166 |
Synthesis and characterization of Cu(II) containing PMMA co-polymer for optical applications
Rojas O, Araya M, Montero ML, Azofeifa DE, Vargas WE |
| 3167 - 3171 |
The magnetic properties of BiY2Fe5O12 nanoparticles doped with Cr ions
Dong B, Yang H, Cui YM, Yu LX, Feng SH |
| 3172 - 3176 |
Effect of silver nanowires on electrical conductance of system composed of silver particles
Chen C, Wang L, Li RL, Jiang GH, Yu HJ, Chen T |
| 3177 - 3189 |
Properties of bonded-polypropylene-bead foams: data and modelling
Mills NJ, Gilchrist A |
| 3190 - 3196 |
Synthesis of PANI/TiO2-Fe3+ nanocomposite and its photocatalytic property
Gao JZ, Li SY, Yang W, Ni G, Bo LL |
| 3197 - 3206 |
Laboratory studies on stripping at bitumen/substrate interfaces using FTIR-ATR
Bagampadde U, Karlsson R |
| 3207 - 3214 |
Low density TEOS based silica aerogels using methanol solvent
Bhagat SD, Hirashima H, Rao AV |
| 3215 - 3222 |
Studies on the blends of modified epoxy resin and carboxyl-terminated polybutadiene (CTPB) - II: thermal and mechanical characteristics
Shukla SK, Srivastava D |
| 3223 - 3229 |
Mechanical properties for bulk metallic glass with crystallites precipitation and second ductile phase addition
Qiu KQ, Hao DZ, Ren YL, Zhang H |
| 3230 - 3237 |
The effect of ormosil nano-particles on the toughness of a polyester resin
Jesson DA, Smith PA, Hay JN, Watts JF |
| 3238 - 3243 |
Immobilization of purine bases on a poly-4-aminophenol matrix
Brito-Madurro AG, Ferreira LF, Vieira SN, Ariza RG, Goulart LR, Madurro JM |
| 3244 - 3250 |
Preparation, characterization and mechanical properties of the polylactide/perlite and the polylactide/montmorillonite composites
Tian HY, Tagaya H |
| 3251 - 3254 |
A method for the evaluation of electromagnetic wave absorption potential using surface temperature change under microwave irradiation
Matsumura K, Kagawa Y |
| 3255 - 3258 |
Urbach tail of gadolinium trihydride films
Shalaan E, Schmitt H |
| 3259 - 3265 |
A chemiometric approach for phosphate inhibition of copper corrosion in aqueous media
Souissi N, Triki E |
| 3266 - 3272 |
Tensile properties of elephant grass fiber reinforced polyester composites
Rao KMM, Prasad AVR, Babu MNVR, Rao KM, Gupta AVSSKS |
| 3273 - 3275 |
Spark plasma sintering (SPS) of transparent magnesium-aluminate spinel
Frage N, Cohen S, Meir S, Kalabukhov S, Dariel MP |
| 3276 - 3279 |
The dielectric and ferroelectric properties of tungsten bronze ferroelectric (K0.5Na0.5)(0.1)(Sr0.5Ba0.5)(0.95)Nb2O6 ceramic
Hao X, Yang YF |
| 3280 - 3285 |
Damage characterization of concrete panels due to impact loading by motionless X-ray laminography
Vossoughi F, Ostertag CP, Monteiro PJM, Albert RD |
