| 925 - 926 |
Dependence of ZnO Varistor Grain-Boundary Resistance on Sintering Temperature
Asokan T, Freer R |
| 927 - 929 |
The Effect of Thermally-Induced Structural-Changes on the Electrochemical Corrosion Behavior of Amorphous Co-Fe-Si-B Alloy
Zaprianova V, Raicheff R, Dimitrov V |
| 930 - 933 |
Microcomposites of Polymeric High-Performance Fibers with Aligned Substructures
Harmer MA, Phillips BR |
| 934 - 936 |
Effect of Fillers on the Temperature Relaxation Behavior of Unsaturated Polyester Based on Recycled Poly(Ethylene-Terephthalate)
Banko AS, Rebeiz KS, Craft AP |
| 937 - 939 |
Novel Varistor Material Based on Tungsten-Oxide
Makarov V, Trontelj M |
| 940 - 943 |
Environmental Fatigue-Crack Growth in Spherulitic Polyethylene
Zok F, Shinozaki DM |
| 944 - 945 |
Grain-Boundary Effects in Dealloyed Foils
Barton T |
| 946 - 949 |
The Microstructure and Fracture-Toughness of an Al-Li-Cu-Mg-Zr Alloy Containing Minor Lanthanum Additions
Zheng ZQ, Zhao YQ, Liu MG, Yin DF |
| 950 - 954 |
Thermal-Expansion and Microstructures of Melted Al2O3-ZrO2-TiO2 Ceramics
Virronic P, Pilling J |
| 955 - 956 |
Positive Temperature-Coefficient of Elastic-Modulus in the High-Temperature Phase of NiTi
Matsumoto H |
| 957 - 959 |
The Initiation of Fatigue Microcracks Near SiC Whisker Ends in a Silicon-Carbide Whisker-Reinforced 6061 Aluminum Composite
Wang DZ, Liu J, Yao CK, He ZH, Geng L |
| 960 - 962 |
A One-Pot Synthesis of Polyzirconoxane as a Precursor for Continuous Zirconia Fibers
Abe Y, Tomioka H, Gunji T, Nagao Y, Misono T |
| 963 - 965 |
Fabrication and Properties of TiC Particulate-Reinforced Aluminum-Alloy Composite Foils
Imai T, Lesperance G, Hong BD, Tozawa Y |
| 966 - 968 |
On the Supersaturated Solution in the Fe-Cu Binary-System Induced by High-Energy Ball-Milling
Qi M, Zhu M, Yang DZ |
| 969 - 970 |
Experimental-Evidence of Nonhomogeneous Strain Distribution in Aluminum Polycrystals
Valach J, Sova M, Berka L |
| 971 - 973 |
The Formability and Texture Level of a Recent Automotive Stamping Grade Al-Mg-Mn Alloy
Ravikumar D, Sen A, Swaminathan K |
| 974 - 976 |
Effect of SiC on the Mechanical-Properties of 3Y-TZP SiC Composites
Lee HL, Lee HM |
| 977 - 979 |
Preparation of Ca-2,2,2-Trifluoroethanolate as a Sintering Additive for AlN Ceramics
Sahling O, Kulig M, Greil P |
| 980 - 982 |
Melting Ratio in Laser-Welding of Dissimilar Metals
Sun Z, Moisio T |
| 983 - 984 |
3-D NMR Microscopy Study of the Structural Characterization of Polycrystalline Materials
Chattopadhyay AK, Knight J, Kapadia RD, Sarkar SK |
| 985 - 988 |
Surface Modification of Electrochemical Copper Coatings with a CW CO2-Laser
Gurkovsky S, Stoychev D |
| 989 - 991 |
Epitaxial-Growth of W/Mo Material by Laser-Beam
Kim TH, Lee HI |
| 992 - 995 |
An Evaluation of Some Commercial Thick-Film Resistor Materials for Strain-Gauges
Hrovat M, Holc J, Belavic D, Soba S |
| 996 - 999 |
The Oxidative Stability of Kratschmer-Huffman Soot After Extraction with Different Solvents
Datta A, Kelkar RY, Datta M |
