| 1177 - 1179 |
Changing the mechanical and structural properties of diamond-like carbon by Ca-O-incorporation
Dorner A, Schurer C, Irmer G, Simon F, Muller E |
| 1181 - 1183 |
Investigation of the structure of damage layers in TEM samples prepared using a focused ion beam
Rubanov S, Munroe PR |
| 1185 - 1185 |
Comments on "The strain-rate sensitivity of flow stress and work-hardening rate in a hot deformed Al-1.0Mg alloy"
Ibanez J, Gonzalez-Doncel G, Carreno F |
| 1187 - 1188 |
Magnetically treated conductive films
Mori K, Oravec J, Chida S |
| 1189 - 1191 |
Alumina chopped fiber reinforced titanium matrix composite fabrication by hot-press method
Kamiya A, Shi W, Watazu A, Zhu J, Naganuma K |
| 1193 - 1194 |
Microwave magnetoimpedance in a bulk ceramic La0.67Ca0.33MnO3 manganite
Srinivasu VV, Sreedevi V, Pradhan AK, Roul BK |
| 1195 - 1197 |
Temperature and strain-rate sensitivity parameters: Analysis of the deformed metal matrix composite A359/SiC/20p
Wang YZ, Cavaliere P, Spigarelli S, Evangelista E |
| 1199 - 1201 |
Preparation of a porous hydroxyapatite/collagen nanocomposite using glutaraldehyde as a crosslinkage agent
Chang MC, Ikoma T, Kikuchi M, Tanaka J |
| 1203 - 1205 |
Electrical and optical studies on europium diphthalocyanine thin films
Unni KNN, Menon CS |
| 1207 - 1209 |
Electrical and optical studies on metal-free phthalocyanine thin films
Unni KNN, Menon CS |
| 1211 - 1212 |
Effect of sizing agent on the properties of carbon fiber/polyethylene composite film
Mironov VS, Park M, Kim J, Lim SH, Choe CR |
| 1213 - 1216 |
Observation of magnetic polarons in Nd0.7Pb0.3MnO3 single crystals
Gu BX, Zhang SY, Zhang HC, Shen BG |
| 1217 - 1219 |
Crystal structure and hydride formation of the HoNi5-xGax alloys
Miletic GI, Sorgic B, Drasner A, Blazina Z |
| 1221 - 1223 |
Improvement of creep resistance of Fe3Al based alloys with tungsten and niobium additions
Yu XQ, Sun YS |
| 1225 - 1227 |
Preparation of biphasic calcium phosphate doped with magnesium fluoride for osteoporotic applications
Manjubala I, Kumar TSS |
| 1229 - 1231 |
Effect of microstructure of SiC layer on the indentation properties of silicon carbide-graphite system fabricated by LPCVD method
Lee KS, Park JY, Kim WJ, Hong GW |
| 1233 - 1235 |
Mesoporous cadmium sulfide templated by hexagonal liquid crystal
Zhang QM, Li Y, Huang FH, Gu ZN |
| 1237 - 1240 |
Synthesis of single-phase perovskite Pb(Zn1/3Nb2/3)O-3 using Pb3Nb2O8 and ZnO
Palai R, Sharma S, Choudhary RNP |
| 1241 - 1243 |
Preparation of PMN powders and ceramics via a high-energy ball milling process
Kong LB, Ma J, Zhu W, Tan OK |
| 1245 - 1248 |
PZT pillars for 1-3 composites prepared by ink-jet printing
Bhatti AR, Mott M, Evans JRG, Edirisinghe MJ |
| 1249 - 1251 |
Preparation of bioactive calcium pyrophosphate glass-ceramics
Kasuga T, Nogami M, Niinomi M |
| 1253 - 1254 |
CdS nanoparticles formed in the interlayer nanospace of expandable mica
Yao K, Nishimura S, Inoue K, Abe E, Tateyama H |
| 1255 - 1257 |
A new gel casting of ceramics by reaction of sodium alginate and calcium iodate at increased temperatures
Xie ZP, Huang Y, Chen YL, Jia Y |
| 1259 - 1262 |
IR spectra of some potassium carboxylates
Gasgnier M |
| 1263 - 1265 |
Peening by the use of cavitation impacts for the improvement of fatigue strength
Soyama H, Kusaka T, Saka M |
| 1267 - 1269 |
Amorphous and nanocrystalline (Fe0.5Co0.5)(60)Cu2V8B30 prepared by mechanical alloying
Ji YL, Wang GH, Li F, Wang GQ, Zhao JW, Zhang SY |
