| 1193 - 1196 |
Chain-Length Dependent Polymorphism in Even Number N-Alkanes - Line-Profile Analysis of Synchrotron Powder X-Ray-Diffraction Data
Craig SR, Hastie GP, Roberts KJ |
| 1197 - 1199 |
Direct Determination of Crack-Growth Exponent and Weibull Modulus from Strength-Probability-Time and Time-Probability-Strength Diagrams
Park SE, Hahn BS, Lee HL |
| 1200 - 1202 |
Effect of Tube Material on Tensile Properties of SiC-Fiber Reinforced Super Alpha(2) Alloys
Leucht R, Dudek HJ, Weber K |
| 1203 - 1204 |
Ti Effect on Microstructure and Strength of Si3N4/Si3N4 and SiC/SiC Joints Brazed with Cu-Ag-Ti Filler Metals
Tamai T, Naka M |
| 1205 - 1211 |
Effect of Sicp and Al(2)O(3)P on the High-Temperature Flow-Stress of Particulate-Reinforced Aluminum Composites
Kwon HC, Yoon EP |
| 1212 - 1215 |
Thermal-Properties of Irradiated Ethylene-Propylene Copolymers
Zaharescu T, Meltzer V, Vilcu R |
| 1216 - 1218 |
Morphology of the Boride Phase in a Cast Iron-Aluminide Matrix Composite
Suwas S, Bhargava S, Sangal S |
| 1219 - 1220 |
Justification of the Assumption of Transport by Diffusion in the Interwafer Region of a Multiwafer CVD Reactor
Loney NW |
| 1221 - 1224 |
Electrical-Properties of Aryloxy Substituted Phthalocyanines
Shankar R, Vasudevan P, Sharma P, Jha NK, Cabrera A, Rosas N |
| 1225 - 1227 |
Luminescence of Copper(I) in Zirconium Pyrophosphate
Pelova V, Grigorov L |
| 1228 - 1230 |
Electrodeposited Nanoporous TiO2 Film by a 2-Step Replication Process from Anodic Porous Alumina
Hoyer P, Masuda H |
| 1231 - 1233 |
Accurate Determination of the Lattice-Parameters of Gamma-TiAl Alloys
Menon ES, Fox AG, Mahapatra R |
| 1234 - 1236 |
Thermomechanical Characterization of B4C Vacuum Plasma-Sprayed Coatings on Stainless-Steel Tubular Substrates
Riccardi A, Pizzuto A |
| 1237 - 1239 |
Preparation and Mossbauer Spectroscopic Characterization of Ultrafine Iron-Oxide Particles
Urakawa T, Nakazawa T, Inoue H, Shirai T, Fluck E |
| 1240 - 1242 |
Formation of Soot or Diamond on the Iron Substrate in the Chemical-Vapor-Deposition Process of Diamond
Hahn JH, Hwang NM, Yoon DY |
| 1243 - 1244 |
Electron-Paramagnetic-Resonance Investigation of Carbon Distribution in Sioc Glasses
Hahn B, Weissmann R, Greil P |
| 1245 - 1246 |
Hydrothermal Synthesis of PbTiO3 from PbO and TiO2
Cheng H, Ma J, Zhao Z, Qi L |
| 1247 - 1248 |
Preparation of Nanosized ZnS Particles in Water/Oil Emulsions by Microwave-Heating
Ma J, Huang X, Cheng H, Zhao Z, Qi L |
| 1249 - 1250 |
The Hydrothermal Synthesis of Ultrafine Cerium(IV) Oxide Powders
Hirano M, Kato E |
| 1251 - 1254 |
High-Temperature Low-Cycle Fatigue Behavior of a 4.2Cr-2.5Mo-V-Nb Hot Work Tool Steel
Tsujii N, Abe G, Fukaura K, Sunada H |
| 1255 - 1257 |
The Aging Characteristic of the Al-5Mg-1.61Li-0.88Ag-0.13Zr Alloy
Chen ZG, Zheng ZQ, Yun DF, Tan CY |
| 1258 - 1260 |
Process-Development for Large-Area Terrestrial Solar-Cells Without Optical Confinement
Chakravarty BC, Basu PK, Arora NK, Chakraborty TK |
| 1261 - 1263 |
Sonochemical Synthesis and Characterization of Nanostructured Iron and Its Alloys
Gonsalves KE, Rangarajan SP, Garciaruiz A, Law CC |
| 1264 - 1266 |
Fracture-Resistance Characteristics of Different-Sized Al2O3-Dispersed 3Y-PSZ Composites
Li JF, Watanabe R |
| 1267 - 1270 |
Effects of SiC Whiskers on the T-M ZrO2 Phase-Transformation in Ceramic-Matrix Composites
Lin GY, Lei TC, Zhou Y |
| 1271 - 1272 |
Phase Relation and Properties of Oxynitride Glasses in the Si3N4-Yb2O3-SiO2 System
Murakami Y, Akiyama K, Yamamoto H |
| 1273 - 1275 |
Tensile Properties of Polyester Mortar Using Pet and Fly-Ash Wastes
Rebeiz KS, Rosett JW, Nesbit SM, Craft AP |
| 1276 - 1278 |
Characteristics of Electrochromic Magnesium Phthalocyanine Films for Repeated Oxidation-Reduction Cycling
Kobayashi T, Fujita K, Muto J |
| 1279 - 1283 |
Effects of New Rare-Earth Additions on Properties and Microstructure of WC-14Tic-8Co Cemented Carbide
Lin CG, He CX, Shi YH, Wang YM |
