| 1145 - 1147 |
Water and Dye Adsorption Properties of Cactaceous Material
Davilajimenez MM, Elizaldegonzalez MP, Pelaezcid AA, Rosasjuarez A |
| 1148 - 1150 |
Grain Modification in Y2O3 Powders - Coarse to Nanoporous
Roy S, Sigmund W, Aldinger F |
| 1151 - 1152 |
Surface Hardening of Hexagonal BN Sintered Body by N+-Ion and Ar+-Ion Implantation
Kikkawa S, Sugiyama H, Kanamaru F |
| 1153 - 1156 |
Microstructure, Mechanical-Properties and Thermoelectric Properties of P-Type Te-Doped Bi0.5Sb1.5Te3 Compounds Fabricated by Hot Extrusion
Seo J, Lee D, Lee C, Park K |
| 1157 - 1160 |
Structural Study of Amorphous Pd41Ni41Si18 Alloy Associated with Structural Relaxation by Anomalous X-Ray-Scattering
Haruyama O, Sugiyama K, Kumazawa S, Waseda Y |
| 1161 - 1163 |
Inclusion of Dy, Ho and Er in B Sites of Modified Lead Titanate
Martinez OP, Saniger JM, Garcia ET, Flores JO, Pinar FC, Llopiz JC, Barranco AP |
| 1164 - 1166 |
The Effect of Sonication for Precipitation of Hydrated Aluminum Sulfate in Aqueous Al(SO4)(3)-Urea System
Savrun E, Toy C |
| 1167 - 1169 |
Photo-Assisted Chemical-Transport Reaction Growth of ZnS on Gap
Krasnov AN, Ruda HE, Jedral L, Mannik L |
| 1170 - 1172 |
Poly(3,3-Disulphidobis(2,2’-Bithiophene)) - a Novel Cross-Linking Electroactive Polymer
Ng SC, Chan HS, Miao P |
| 1173 - 1174 |
Electrical-Resistivity of La(0.7)A(0.3)MnO(3) (A=ca, Sr and Ba) at Low-Temperature
George AM, Mishra NC, Pillai CG |
| 1175 - 1178 |
On the Formation of Tial3 During Reaction Between Solid Ti and Liquid Al
Sujata M, Bhargava S, Sangal S |
| 1179 - 1181 |
Tensile and Fatigue Fracture-Behavior of a Spot Welded Al-Mg Alloy
Jiang DM, Kang SB, Kim HW |
| 1182 - 1183 |
Control of Percolation Curve by Filler Particle-Shape in Cu-Sbr Composites
Ota T, Fukushima M, Ishigure Y, Unuma H, Takahashi M, Hikichi Y, Suzuki H |
| 1184 - 1186 |
Electrical-Properties of Thick-Film Resistors from Noise Measurements
Peled A, Kasap SO, Johanson RE, Zloof Y |
| 1187 - 1190 |
Effect of Cleaving Environment on the Growth of ZnSe on the GaAs(110) Surface by Molecular-Beam Epitaxy
Ko HC, Park DC, Kawakami Y, Fujita S, Fujita S, Kim CO |
| 1191 - 1194 |
Irradiation-Enhanced Solute Diffusion in Alloys
Faulkner RG, Song SH, Flewitt PE, Fisher SB |
| 1195 - 1197 |
Fabrication of Grain-Oriented MoO3 Ceramics Using Wet-Molding Process
Honma K, Hirota K, Yamaguchi O, Asai J, Makiyama Y |
| 1198 - 1200 |
Direct Observations on Apatite Crystals in Ivory
Su XW, Cui FZ |
| 1201 - 1204 |
Preparation of Perovskite-Type La0.85Sr0.15Mno3 Particles by Spray-Pyrolysis Using a Filter Expansion Aerosol Generator
Kang YC, Park SB |
| 1205 - 1207 |
Surface Electromigration of Au-Ag Binary Film on SiO2
Shi FX, Yao WQ, Cao LL, Dong YH |
| 1208 - 1211 |
A Comparative-Study of YBCO Powders Prepared by Different Processes
Pathak LC, Mishra SK, Bhattacharya D, Chopra KL |
| 1212 - 1215 |
Bonding of Alumina to Metals with Ag-Cu-Zr Brazing Alloy
Kim JH, Yoo YC |
| 1216 - 1218 |
Preparation and Toughening Characterization of High Fracture-Toughness Si3N4 Ceramic with Rodlike Structure
Luo XT, Yuan RZ |
| 1219 - 1221 |
Influence of Resin Additives on Failure Behavior of Pultruded Glass/Polyester Composites Shapes
Chotard TJ, Benzeggagh ML |
| 1222 - 1223 |
Raman-Spectroscopy as a Mapping Tool for Localized Strain in Microengineered Structures
Wood D, Cooper G, Gardiner DJ, Bowden M |
| 1224 - 1226 |
Preparation of Al-Al2O3 in-Situ Particle Composites by Addition of Fe2O3 Particles to Pure Al Melt
Maity PC, Chakraborty PN, Panigrahi SC |
| 1227 - 1230 |
The Effect of Nonequilibrium Grain-Boundary Segregation on the Tensile Properties and the Electrochemical-Behavior of Nickel
Louahdi R, Ouakdi EH, Saindrenan G, Legall R, Boucenna A |
| 1231 - 1232 |
Mossbauer Study of Iron in V2O3-Based PTC Ceramics
Ruan LJ, Cui WQ |
| 1233 - 1235 |
Fast CO2-Laser Firing of Sol-Gel SnO2-Sb Coatings
Ganz D, Gasparro G, Otto J, Reich A, Arfsten NJ, Aegerter MA |
