| 1377 - 1380 |
Interface Indentation Test for the Determination of Adhesive Properties of Thermal Sprayed Coatings
Demarecaux P, Chicot D, Lesage J |
| 1381 - 1383 |
Grain-Size and Plastic Strain as Co-Determinants of Stress-Relaxation Process in Polycrystalline Nickel
Butt MZ, Kauser N, Akbar S, Shaheed SS, Siddiq N, Arshad M, Ashraf M |
| 1384 - 1387 |
Synthesis of Aluminosilicate Composite Membranes
Hyun SH, Yi SC, Kim SG |
| 1388 - 1391 |
Effect of Annealing on Wear of Cf/Peek Composites Against Smooth Steel
Ye L, Daghyani HR, Chow JC |
| 1392 - 1394 |
Structural Evolution of Gel-Derived Nanocrystalline Titania Powders Doped with Ferric-Oxide
Ding XZ, Liu XH, He YZ |
| 1395 - 1396 |
The Strength of Duplex Al2O3-Znal2O4 Composite
Tzing WS, Tuan VH |
| 1397 - 1399 |
Determination of Hydrogen Diffusivity in Al-Li-Cu-Mg Alloys
Thakur C, Balasubramaniam R |
| 1400 - 1402 |
The Influence of Helium on Grain-Growth in High-Purity Aluminum
Wright RN, Usmar SG |
| 1403 - 1407 |
The Role of N,N-Dimethylformamide and Glycol in the Preparation and Properties of Sol-Gel Derived Silica
Parashar VK, Raman V, Bahl OP |
| 1408 - 1411 |
The Effect of Ruthenium on the Corrosion Behavior of a 22 Mass Percent Chromium Ferritic Stainless-Steel in 1 M Sulfuric-Acid
Potgieter JH |
| 1412 - 1415 |
Strain-Induced Martensite Formation During the Intersection of Plate Martensites in Fe-17.1 Wt-Percent Ni-0.81 Wt-Percent C-Alloy
Durlu TN |
| 1416 - 1419 |
Dynamic-Mechanical Spectroscopy and Modulated Differential Scanning Calorimetry of an Annealed Poly(Phenylene Sulfide)
Breach CD, Hu X |
| 1420 - 1421 |
Crystal Orientations of Electrodeposited Copper Film from a Magnetically Treated Acid Copper-Sulfate Bath
Chiba A, Wu WC, Kobayashi K, Sasaki Y, Yoshihara S |
| 1422 - 1423 |
Effect of Crystallization of Thermoplastic Polyimide Resin on Erosion Rate
Miyazaki N |
| 1424 - 1426 |
Effect of Rare-Earth Ions on the Structural Parameters of Modified Plnzt Ceramics(5/65/35)
Sharma HD, Govindan A, Goel TC, Pillai PK, Pramila C |
| 1427 - 1428 |
Reverse Martensite-Transformation Induced by Strain in Fe-Mn-Si Alloy
Zhao ZT, Liu T, Liu GW, Ma RZ |
| 1429 - 1431 |
Oxidation of an Aluminum-0.4 Wt-Percent Magnesium Alloy
Kim DH, Yoon EP, Kim JS |
| 1432 - 1434 |
Protective Coatings for Reactively Synthisizing TiAl Sheet Material
Jewett TJ, Dahms M |
| 1435 - 1438 |
CeO2-Doped Alpha-Sialon Ceramics
Mandal H, Thompson DP |
| 1439 - 1442 |
Optical Spectroscopy of NaCl-Tl+ and NaCl-Tl+mn2+ Single-Crystals
Ramos F, Diamant R, Camarillo I, Munoz G, Caldino U |
| 1443 - 1446 |
(1-X)Pb(Mg1/3Nb2/3)O-3-Xpb(Fe-1/Nb-2(1/2))O-3 Powders by Molten-Salt Synthesis
Kim SJ, Hong YS, Park HB, Park SY, Kim K |
| 1447 - 1449 |
Preferred Orientation in Hot-Pressed Ca Alpha-Sialon Ceramics
Wang H, Cheng YB, Muddle BC, Gao L, Yen TS |
| 1450 - 1453 |
N-2 Adsorption-Isotherms Study of the Texture Changes in Silica-Gel Modified by Organofunctional Groups
Santilli CV, Dias NL, Pulcinelli SH, Moreira JC, Gushikem Y |
| 1454 - 1456 |
Perfluorosulfonate Ionomer Membranes for Separation of Petrochemical Mixtures
Vanzyl AJ, Linkov VM, Bobrova LP, Timofeev SV |
| 1457 - 1459 |
Thermal-Diffusivity and Conductivity of Highly Filled Epoxies as Cover Materials for Microelectronical Devices as Measured by the Heat Pulse Technique
Nyilas A, Rehme R, Wyrwich C, Springer H, Hinrichsen G |
| 1460 - 1462 |
Effects of Inhibitor and Cure Promoter on Unsaturated Polyester Cure and Mechanical-Properties
Grohens Y, Touyeras F, George B, Vebrel J |
| 1463 - 1466 |
Effect of Hydrostatic-Pressure During High-Temperature Flow of an Al-Si Alloy
Mahidhara RK |
