| 1601 - 1603 |
Modified rule of mixtures for prediction of tensile strength of unidirectional fiber-reinforced composites
Lee C, Hwang W |
| 1605 - 1607 |
Surface modification of CrSi2 nanocrystals with polymer coating
Lu J, Liu B, Yang H, Luo W, Zou G |
| 1609 - 1611 |
Mechanical properties and microstructure of mullite whisker-reinforced magnesium aluminosilicate glass with cordierite composition
Travitzky NA |
| 1613 - 1615 |
Transport studies of poly(ethylene oxide)-based polymer electrolyte complexed with sodium yttrium fluoride
Reddy MJ, Rao UVS |
| 1617 - 1619 |
Prevention of stick-stip tearing of a Duralcan AA6061-matrix composite during extrusion
Zhou J, Duszczyk J |
| 1621 - 1622 |
Limitations due to high extrusion temperatures in hot extrusion reaction synthesis of Ni3Al
Morsi K, McShane M, McLean H |
| 1623 - 1625 |
Low-temperature hydrothermal stabilization and transport property of the cubic KNb0.77Al0.23O2.77
Li G, Wang M, Yao X, Li L, Feng S |
| 1627 - 1629 |
Surface reactions of Co3Ti alloys with water vapor
Chen YX, Wan XJ, Xu WX |
| 1631 - 1634 |
Investigations of the structural changes ahead of a crack tip in ductile aluminum, using scanning microbeam, small-angle X-ray scattering
Grosse M, Boehmer J, Riekel C |
| 1635 - 1636 |
Bismuth- and aluminum-substituted iron garnet film, deposited by rf magnetron-sputtering using a novel target
Ma XY, Sha J, Zhang SY, Que DL, Zhen YX, Chen LY |
| 1637 - 1640 |
The formability of spray-formed, high-chromium content, white cast iron
Hanlon DN, Li YH, Rainforth WM, Sellars CM |
| 1641 - 1643 |
Use of trichlorophenylsilane in the synthesis of polymeric precursors for silicon carbide
Bao X, Edirisinghe MJ |
| 1645 - 1647 |
Microstructural features of Pb(ZrxTi1-x)O-3/YBa2Cu3O7-x/SrTiO3 heterostructure
Jin O, Liu W, Li L, Zhao BR |
| 1649 - 1651 |
The photoluminescence study of p(-)/p(+) type porous silicon
Sun L, Zhang SL, Zhang L, Guan XD, Han RQ |
| 1653 - 1655 |
Growth mechanism of PbTiO3 films by metal organic chemical vapor deposition from Pb(DPM)(2), Ti(DPM)(2)(i-OPr)(2) and O-2
Nishioka K, Murayama S, Osawa T, Egashira Y, Komiyama H |
| 1657 - 1659 |
High-resolution electron microscope observation of the non-basal planar defects in 18R martensite in a Cu-Zn-Al alloy
Zhang JX, Zheng YF, Cai W, Zhao LC |
| 1661 - 1663 |
Temperature-dependent transmittance studies on BaTiO3 films grown on p-Si (100) substrates by metal organic chemical vapor deposition
Kim TW, Yom SS |
| 1665 - 1667 |
Synthesis of zirconia-coated gold nanoparticles
Vacassy R, Lemaire L, Valmalette JC, Dutta J, Hofmann H |
| 1669 - 1671 |
Freeforming ceramics using a thermal jet printer
Slade CE, Evans JRG |
| 1673 - 1675 |
Analysis of image retention in alternating-current thin-film electroluminescent devices
Krasnov AN, Hofstra PG, Bajcar RC |
| 1677 - 1679 |
Functionally graded Al/Mg2Si in-situ composites, prepared by centrifugal casting
Zhang J, Wang YQ, Zhou BL, Wu XQ |
| 1681 - 1683 |
Transcrystallinity at interior boundaries in multilayer crystalline PCTFE films
Love BJ, Cherry K, Longhenry JL, Murthy NS, Bednarczyk C |
| 1685 - 1687 |
Stoichiometric and dielectric properties of BaTiO3 thin films prepared by backside pulsed ion-beam evaporation
Sonegawa T, Yatsui K |
