| 1557 - 1562 |
Study of impact hysteresis curves on e-glass reinforced polypropylene laminates
Santulli C |
| 1563 - 1565 |
Magnetic behavior of La(0.5)Ka(0.5)Me(2)Fe(16)O(27) hexagonal ferrites
Reddy NK, Rao KS, Mulay VN |
| 1567 - 1568 |
Measurement method for assessing the power generation characteristics of piezoelectric energy transducers
Ichiki M, Maeda R, Kitahara T |
| 1569 - 1572 |
Mossbauer study of hydrogenation effects in iron-rich intermetallics
Sorescu M, Pourarian F, Brand RA |
| 1573 - 1576 |
Sliding wear properties of Al-Cu based alloys with SiC particle reinforced composites under varying experimental conditions
Dasgupta R, Meenai H |
| 1577 - 1579 |
In-situ polypyrrole film formation using ferric nitrate as oxidizing agent
Ayad MM |
| 1581 - 1583 |
Formation mechanism of amorphous layer at the interface of Si(111) substrate and AlN buffer layer for GaN
Hu GQ, Kong X, Wang YQ, Wan L, Duan XF, Lu Y, Liu XL |
| 1585 - 1586 |
Influence of growth parameters on the structure of YBCO thin films prepared by sequential deposition and annealing
Liu XZ, Tao BW, Li YR |
| 1587 - 1589 |
Critical nanoparticle size for thermal stability
Praserthdam P, Phungphadung J, Somrang P, Kunyanucharat A, Silveston P, Tanakulrungsank W |
| 1591 - 1594 |
Effect of silane coupling agents with different organo-functional groups on the interfacial shear strength of glass fiber/Nylon 6 composites
Yun SH, Cho DH, Kim J, Lim S, Lee GW, Park M, Lee SS |
| 1595 - 1597 |
Sulfonated polyether ether ketone membranes cured with different methods for direct methanol fuel cells
Li L, Zhang J, Wang YX |
| 1599 - 1601 |
Frequency and composition dependence of dielectric behavior of copper substituted lithium ferrites
Ravinder D, Reddy PVB, Shalini P |
| 1603 - 1606 |
Microstructure of ZnO/Cu/TaN/SiO2/Si multilayers prepared by sputter deposition
Wu WY, Ting JM |
| 1607 - 1608 |
Design aspects in processing of Ni-Zn ferrites for high frequency applications
Rao BP, Rao KH |
| 1609 - 1611 |
Superplastic behavior of an Al-bearing eutectoid steel
Barrales-Mora LA, Hernandez-Silva D, Sauce-Rangel V, Araujo-Osorio JE |
| 1613 - 1615 |
Effect of Na on microstructure, dielectric and piezoelectric properties of PZT ceramic
Mahato DK, Chaudhary RK, Srivastava SC |
| 1617 - 1619 |
Preparation of collagen films by electrostatic atomization
Jayasinghe SN, Edirisinghe MJ |
| 1621 - 1622 |
X-ray diffraction study of langasite film grown by liquid phase epitaxy
Zhang H, Singh NB, Adam JD, Berghmans A, Tidrow S, Fazi C |
| 1623 - 1625 |
Chemical mechanical planarization of copper: pH effect
Du T, Desai V |
| 1627 - 1630 |
Al/AlN layered composites by direct nitridation of aluminum
Hall BJ, Schaffer GB, Ning Z, McPhee WAG, Miller DN, Drennan J, Cumming DJ |
| 1631 - 1633 |
Preparation of nanocrystalline WC-10Co-0.8VC by spark plasma sintering
Zhu LH, Huang QW, Zhao HF |
| 1635 - 1637 |
Novel method of developing oxide coating on aluminum using microwave heating
Das S, Mukhopadhyay AK, Datta S, Basu D |
| 1639 - 1641 |
Green microstructure and mechanical properties of BaTiO3-poly(vinyl butyral) tape-cast bodies
Cho CW, Yeo JG, Jung YG, Paik U |
| 1643 - 1644 |
Discussion on the paper "Simulation of porosity by microballoon dispersion in epoxy and urethane: Mechanical measurements and models" by M. A. El-Hadek and H. V. Tippur, Journal of Materials Science, 37, 1649-1660, 2002
Bardella L |
| 1644 - 1646 |
Author's Response to the Discussion on the paper "Simulation of porosity by microballoon dispersion in epoxy and urethane: Mechanical measurements and models" by M. A. El-Hadek and H. V. Tippur, Journal of Materials Science, 37, 1649-1660, 2002
El-Hadek MA, Tippur HV |
