| 1879 - 1881 |
Residual stresses analysis by X-ray diffraction in terms of equivalent applied stress on Ni-(Al2O3, SiO2) particle composites
Drira-Halouani R, Lavelle B |
| 1882 - 1884 |
Preparation of CaS : Ce and SrS : Ce thin films by a spin-coating method and their characterization
Morimo R, Bickerton JC, Clough S, Viney IVF, Ray B |
| 1885 - 1887 |
Correlation of microwave and conduction calorimeter measurements on the hydration of cement
Zhang X, Yang Y, Ong CK |
| 1888 - 1889 |
Delamination resistance behaviour in unidirectional graphite-epoxy composites
Rhee KY |
| 1890 - 1893 |
Tensile properties of some Zn-27.5 wt% Al alloys as influenced by heat treatment and test conditions
Prasad BK, Patwardhan AK, Yegneswaran AH |
| 1894 - 1897 |
Morphological, electrochemical and optical properties of heat-treated magnesium phthalocyanine films
Fujita K, Muto J, Itoh KM |
| 1898 - 1901 |
Effects of SrTiO2 substrates on the roughness of BaTiO3/SrTiO3 superlattices
Zhu AJ, Li CR, Zou KH, Zeng Y, Lu HB, Wang HS, Cui DF, Chen AH, Mai ZH |
| 1902 - 1903 |
Electrochemical Ni plating of Nd15Fe77B8 permanent magnets : mechanical adherence evaluation
Assis OBG, Ferrante M |
| 1904 - 1905 |
Comment on "Indentation size effect : reality or artefact?"
Gubicza J, Rozlosnik N, Juhasz A |
| 1906 - 1909 |
High-strength wood-based materials
Yano H, Hirose A, Inaba S |
| 1910 - 1913 |
Structure of ion-beam-deposited B-C-N-O films and the role of oxygen
Zhao XA, Ong CW, Ng YM, Chan KF, Tsang YC, Choy CL, Chan PW, Kwok RWM |
| 1914 - 1919 |
Simulation of microstructural evolution in glass-ceramics containing perovskite phases
Sinha I, Mandal RK |
| 1920 - 1924 |
Room-temperature plastic flow and strain-induced martensitic transformation in 1.2 wt% Ni metastable austenitic stainless steel sheets
Raj AK, Padmanabhan KA |
| 1925 - 1928 |
Electron transfer in the surface reaction of NOx (x=1 and 2) over LaBaSrCu2O6-delta
Munakata F, Akimune Y, Shichi Y, Akutsu M, Misono Y |
| 1929 - 1932 |
Structural growth and electrical behaviour of Ba(Mn1/2Mo1/2)O-3
Salvi SV, Durge NG, Ranade AJ, Tendolkar NP |
| 1933 - 1935 |
Inhibitory effect of alumina additive on the titania phase transformation of a sol-gel-derived powder
Yang J, Huang YX, Ferreira JMF |
| 1936 - 1938 |
Growth of highly oriented (Hg, Pb)-based superconducting thin films on LaAlO3 substrates by pulsed-laser ablation
Zhou J, Ji ZM, Yang SZ, Wu PH, Yu Y, Shao HM, Yao XX, Lai MY, Zhang WL |
| 1939 - 1942 |
Spectroscopic studies of photochromic N-[4-(4-alkoxybenzoyloxy)-2-hydroxy-benzylidene]-4-alkylanilines
Takase A, Sakagami S, Koga T, Nonaka K |
| 1943 - 1944 |
Pyroelectric measurements on BaTiO3-polymer composites using the laser intensity modulation method
Geschke D, Leister N, Steffen M, Glasel HJ, Hartmann E |
| 1945 - 1947 |
X-ray study of the influence of water on the cellulose membrane structure
Grigoriew H, Chmielewski AG |
| 1948 - 1951 |
Heating rate effect on the electrical properties of MnxZn1-xFe2O4 ferrite (x=0.28, 0.48, 0.64 and 0.76)
Ahmed MA, Darwish KA, El-Khawas EH |
| 1952 - 1954 |
On the highly selective ZnO : Al2O3 based thick film hydrogen sensors
Dayan NJ, Sainkar SR, Belkehar AA, Karekar RN, Aiyer RC |
| 1955 - 1957 |
Effects of forced flow on morphology of Al-CuAl2 eutectic solidified with electromagnetic stirring
Zhang W, Yang Y, Liu Q, Zhu Y, Hu Z |
| 1958 - 1960 |
Formation of self-reinforced microstructure by the control of starting phase in liquid-phase sintered silicon carbide ceramics
Lee JK, Kim YJ, Kim H |
| 1961 - 1963 |
Various solid solutions in the systems Y2O3-R2O3 (R=La, Nd, and Sm) at high temperature
Yoshimura M, Rong XZ |
| 1964 - 1966 |
Electrochemical behaviour of hydroxyapatite-coated stainless steel implants
Sridhar TM, Arumugam TK, Rajeswari S, Subbaiyan M |
