| 229 - 231 |
Preparation and Characterization of Hydroxyl and Iodide Apatites of Calcium and Their Solid-Solutions
Phebe DE, Narasaraju TS |
| 232 - 234 |
Influence of the Heat-Treatment and of the Chromium Addition on the Precipitation Phenomena of Al-Zn-Mg-Cu Alloy
Cilense M, Garlipp W, Adorno AT, Lourenco CS |
| 235 - 237 |
Sublimation Enthalpy of Tin Monoselenide
Zocchi F, Piacente V |
| 238 - 240 |
Kinetics of the Gamma-Al2O3 to Alpha-Al2O3 Transition in the Presence of V2O5 and ZrO2 Additives
Platchkova B, Coruderlieva S |
| 241 - 243 |
Cyclic Fatigue-Crack Growth of Silicon-Nitride Under a Constant Maximum Stress Intensity
Choi G |
| 244 - 246 |
The Roles of Hydrogen in Deposition of Diamond Film Using Hydrogen-Oxyacetylene Combustion-Flame
Zhimeng G, Sheng Y, Heyi L |
| 247 - 248 |
Effect of Phosphorus-Content on the Relative Proportions of Crystalline and Amorphous Phases in Electroless Nip Deposits - Comment
Schumacher G, Birtcher RC |
| 249 - 251 |
High-Resolution Electron-Microscopic Studies of the Interfaces Between Ibad Molybdenum and Al2O3(0001) Substrate
He XJ, Tao K, Fan YD |
| 252 - 255 |
Preparation of High-Density Ito Ceramics by an in-Situ Precipitation Method
Kayukawa T, Shigetani H, Senna M |
| 256 - 257 |
Solubility and Crystal-Growth of Calcite in Organic Salt-Solutions Under Hydrothermal Conditions
Yanagisawa K, Ioku K, Yamasaki N |
| 258 - 260 |
An Electrical Model for Ca2+ Channels in Excitable-Membranes
Norian KH |
| 261 - 264 |
Microstructure and Chemistry of 2nd Phases in MgO-Codoped and NiO-Codoped Alumina by Analytical Transmission Electron-Microscopy
Park K, Vasilos T, Sung C |
| 265 - 267 |
Preliminary Data on Subsolidus Phase-Equilibria in the La2O3-Al2O3-Mn2O3 and La2O3-Al2O3-Fe2O3 Systems
Hrovat M, Holc J, Kuscer D, Samardzija Z, Bernik S |
| 268 - 270 |
A Structural Assessment of Glass-Formation in Alkali Borates - Melt Quenching Versus Gel Drying
Chryssikos GD, Patsis AP, Kamitsos EI, Kapoutsis JA |
| 271 - 274 |
Conductivity Behavior of Modified Polysiloxane-NaI Polymer Complexes
Kunde N, Paulmer RD, Shyamala S, Khosla NK, Kulkarni AR |
| 275 - 275 |
Electrodeposition of Ru-Sn Coatings
Hodgson DR |
| 276 - 278 |
Youngs Modulus, Strength and Fracture-Toughness as a Function of Density of in-Situ Toughened Silicon-Nitride with 4-Wt-Percent Scandia
Choi SR, Sanders WA, Salem JA, Tikare V |
| 279 - 281 |
Raman-Spectroscopy on Defective Wear Debris Generated by Contact Vibrations
Mohrbacher H, Blanpain B, Celis JP, Roos JR |
| 282 - 284 |
A Comparison of Crack Initiation Techniques for Ceramics
Hermann R, Moffatt J, Plumbridge WJ |
| 285 - 288 |
T-)R Phase-Transformation of Tetragonal Zirconia Alloys by Grinding
Kim DJ, Jung HJ, Kim HJ |
| 289 - 290 |
Fine-Structure Characterization of Stress-Strain Curves for Deformed Austenitic Stainless-Steels
Teng ZY, Wang H, Li JX, Shan FL, Teng FE, Wang YM |
| 291 - 293 |
The Behavior of Hydrogen in Polycrystalline Ni3Al Alloys Studied by Positron-Annihilation
Deng W, Xiong LY, Lung CW, Wang SH, Guo JT |
| 294 - 296 |
Superconducting Property of YBa2Cu3O7 for Mechanical-Stress
Hirakuri KK, Tanabe H, Nakano T |
| 297 - 301 |
Effect of Niobium Content on Creep Strength of Cold-Worked 15Cr-15Ni-2.5Mo Austenitic Steel
Fujiwara M, Uchida H, Ohta S |
| 302 - 304 |
Dynamic Flexure Tests of Soil-Cement Beams
Bhogal BS, Coupe PS, Davies J, Fendukly LM |
