| 621 - 622 |
Proposal for a New Mechanism for the Transformation of Alumina into Aluminum Nitride
Colque S, Grange P |
| 623 - 628 |
Mechanical Alloying of Polytetrafluoroethylene with Polyethylene
Ishida T |
| 629 - 632 |
Predictive Modeling of the Mechanical-Properties of Rubber-Toughened Epoxy
Guild FJ, Kinloch AJ |
| 633 - 635 |
Monitoring of the Curing and Process-Induced Deformation of Composite-Materials by Dielectrometry
Gutman EM, Kadim YM, Merovich ID |
| 636 - 638 |
Fractal Behavior in Fatigue of Materials
Ding HZ, Xing XS, Zhu HS |
| 639 - 640 |
Influence of Ferrous Content on the 2nd Maximum Permeability Temperature of Mn-Zn Ferrites
Hung YH, Chien YT, Ko YC |
| 641 - 643 |
Polyimide-Silica Hybrid Materials by Sol-Gel Processing
Mascia L, Kioul A |
| 644 - 646 |
Focal Point Location in Laser Machining of Thick Hard Wood
Tayal M, Barnekov V, Mukherjee K |
| 647 - 649 |
Search for Fine Moire Fringes Representing the (010), (100) and (013) Planes in Aligned Unit Cells of Yba2Cu2.7Sn0.3O7-Y Superconducting Crystals
Chow JC, Fung PC, Mok YC, Du ZL |
| 650 - 652 |
The Possibility of the Production of Reaction-Bonded Aluminum-Oxide Using Microwave-Energy
Park JH, Ahn ZS |
| 653 - 655 |
Sintering and Crystallization of Ground Hexagonal Boron-Nitride Powders
Hagio T, Yoshida H |
| 656 - 657 |
Gas-Permeability of Plasma-Sprayed Mosi(2) Coating
Fukumoto M, Ueda T, Okane I |
| 658 - 659 |
Toughening Zirconia with Bimodally Distributed Silver Inclusions
Tuan WH, Chen WR |
| 660 - 662 |
Scanning Electron-Microscopic Observation During Crystallization of Na-X and Related Zeolites Compared with X-Ray-Diffraction Crystallinity
Shigemoto N, Sugiyama S, Hayashi H, Miyaura K |
| 663 - 667 |
Wear Studies of Fiber-Reinforced Ceramic-Matrix Composites
Bleay SM, Scott VD, Harris B |
| 668 - 670 |
Synthesis of YBa2Cu3O7-X Superconductor with Fiber Structure by the Sol-Gel Method
Admaiai LF, Daza L, Grange P, Delmon B |
| 671 - 674 |
Effect of Phosphorus-Content on the Relative Proportions of Crystalline and Amorphous Phases in Electroless Nip Deposits
Kumar PS, Nair PK |
| 675 - 677 |
Pultrusion and Properties of Unidirectional Glass-Fiber Polypropylene Matrix Composites
Tomlinson WJ, Holland JR |
| 678 - 679 |
New Process for Fabricating Interconnect Plate for a Planar Solid Oxide Fuel-Cell
Sammes NM, Ratnaraj R |
| 680 - 683 |
Oxidation and Properties Degradation of SiC Fibers Below 850-Degrees-C
Gogotsi Y, Yoshimura M |
| 684 - 687 |
Fracture-Behavior of Casein Films
Somanathan N, Sanjeevi R |
| 688 - 689 |
Mechanochemical Method of Nanocrystalline Powder Copper Preparation
Durisin J, Orolinova M, Durisinova K, Katana V |
| 690 - 692 |
The Effect of C and Co Additions on the Structures of a Fe-B-Si Metallic-Glass
Habib K, Eling V, Wu C, Moore K, Nussler R |
| 693 - 695 |
On the Magnetic-Properties of Cadmium-Doped Y-Ba-Cu-O High-Temperature Superconductors
Serfoso G, Kiss LF, Zsoldos E, Toth J, Sandor S, Papadimitriou L, Dozsa L |
