| 1 - 4 |
Synthesis of ionic liquid using a four-compartment configuration electrodialyzer
Meng H, Li H, Li CX, Li LS |
| 5 - 37 |
Membranes for the dehydration of solvents by pervaporation
Chapman PD, Oliveira T, Livingston AG, Li K |
| 38 - 44 |
Direct preparation of macroporous mullite supports for membranes by in situ reaction sintering
Chen GL, Qi H, Xing WH, Xu NP |
| 45 - 55 |
Hydrogen separation from reforming gas using organic templating silica/alumina composite membrane
Moon JH, Bae JH, Bae YS, Chung JT, Lee CH |
| 56 - 64 |
Formation and consolidation of filter cake in microfiltration of emulsion-slurry
Iritani E, Matsumoto S, Katagiri N |
| 65 - 70 |
Use of layer-by-layer assembled ultrathin membranes of dicopper-[18]azacrown-N-6 complex and polyvinylsulfate for water desalination under nanofiltration conditions
El-Hashani A, Toutianoush A, Tieke B |
| 71 - 78 |
The polyurethane/SiO2 nano-hybrid membrane with temperature sensitivity for water vapor permeation
Zhou H, Chen Y, Fan HJ, Shi HH, Luo ZY, Shi B |
| 79 - 83 |
Fast proton-conducting ceramic membranes derived from ferroxane nanoparticle-precursors as fuel cell electrolytes
Tsui EA, Wiesner MR |
| 84 - 99 |
Atomistic packing model and free volume distribution of a polymer with intrinsic microporosity (PIM-1)
Heuchel M, Fritsch D, Budd PM, McKeown NB, Hofmann D |
| 100 - 106 |
An improved Parks equation for prediction of surface charge properties of composite ceramic membranes
Zhang Q, Jing WH, Fan YQ, Xu NP |
| 107 - 113 |
Fabrication of a superhydrophobic polypropylene membrane by deposition of a porous crystalline polypropylene coating
Franco JA, Kentish SE, Perera JM, Stevens GW |
| 114 - 122 |
Influence of molecular shape on the retention of small molecules by solvent resistant nanofiltration (SRNF) membranes: A suitable molecular size parameter
Zheng FC, Li CX, Yuan QP, Vriesekoop F |
| 123 - 128 |
Hydrogen production from a DME reforming-membrane reactor using stainless steel-supported Knudsen membranes with high permeability
Park SJ, Lee DW, Yu CY, Lee KY, Lee KH |
| 129 - 136 |
Barrier properties of model epoxy nanocomposites
Sun LY, Boo WJ, Clearfield A, Sue HJ, Pham HQ |
| 137 - 144 |
Plasma polymer thin film depositions to regulate gas permeability through nanoporous track etched membranes
Chapman CL, Bhattacharyya D, Eberhart RC, Timmons RB, Chuong CJ |
| 145 - 153 |
Membrane characterization by optical methods: Ellipsometry of the scattered field
Wyart Y, Georges G, Deumie C, Amra C, Moulin P |
| 154 - 166 |
Modeling and optimization of hollow fiber DCMD module for desalination
Cheng LH, Wu PC, Chen JH |
| 167 - 175 |
Solvent effect on morphology and CO2/CH4 separation performance of asymmetric polycarbonate membranes
Iqbal M, Man Z, Mukhtar H, Dutta BK |
| 176 - 181 |
Use of paramagnetic particles in membrane integrity testing
Deuhery J, Rajagopalan N |
| 182 - 190 |
Oxygen selective membranes based on B-site cation-deficient (Ba0.5Sr0.5)(Co0.8Fe0.2)(y)O3-delta perovskite with improved operational stability
Ge L, Ran R, Zhang K, Liu SM, Shao ZP |
| 191 - 200 |
Application of local material properties to prediction of constant flux filtration behaviour of compressible matter
Kovalsky P, Wang XM, Bushell G, Waite TD |
| 201 - 209 |
Effects of precursor properties on the preparation of polyethylene hollow fiber membranes by stretching
Kim J, Kim SS, Park M, Jang M |
| 210 - 216 |
Improvement of membrane filterability of the mixed liquor in a membrane bioreactor by ozonation
Huang X, Wu JL |
| 217 - 226 |
Investigation of the fundamental differences between polyamide-imide (PAI) and polyetherimide (PEI) membranes for isopropanol dehydration via pervaporation
Wang Y, Jiang LY, Matsuura T, Chung TS, Goh SH |
| 227 - 232 |
Preparation and characterization of crosslinked poly(ethylene glycol) diacrylate membranes with excellent antifouling and solvent-resistant properties
Kang GD, Cao YM, Zhao HY, Yuan Q |
| 233 - 246 |
Aluminum-rich zeolite beta incorporated sodium alginate mixed matrix membranes for pervaporation dehydration and esterification of ethanol and acetic acid
Adoor SG, Manjeshwar LS, Bhat SD, Aminabhavi TM |
| 247 - 254 |
A combined fouling model to describe the influence of the electrostatic environment on the cross-flow microfiltration of BSA
de la Casa EJ, Guadix A, Ibanez R, Camacho F, Guadix EM |
| 255 - 263 |
Influence of polyaniline intercalations on the conductivity and permselectivity of perfluorinated cation-exchange membranes
Compan V, Riande E, Fernandez-Carretero FJ, Berezina NP, Sytcheva AAR |
| 264 - 270 |
Influence of biofouling on boron removal by nanofiltration and reverse osmosis membranes
Huertas E, Herzberg M, Oron G, Elimelech M |
| 271 - 279 |
Synthesis and characterization of sulfonated poly(arylene ether)s with sulfoalkyl pendant groups for proton exchange membranes
Pang JH, Zhang HB, Li XF, Wang LF, Liu BJ, Jiang ZH |
| 280 - 287 |
Dye deposition patterns obtained in line printing on macroporous membranes: Improvement of line sharpness by liquid redistribution
Wang J, Thom V, Hollas M, Johannsmann D |
| 288 - 297 |
Phosphonic acid grafted bis(4-gamma-aminopropyldiethoxysilylphenyl) sulfone (APDSPS)-poly(vinyl alcohol) cross-linked polyelectrolyte membrane impervious to methanol
Tripathi BP, Saxena A, Shahi VK |
| 298 - 310 |
Pertraction of lactic acid through supported liquid membranes containing phosphonium ionic liquid
Martak J, Schlosser S, Vlckova S |
| 311 - 316 |
Fractionation of monoclonal antibody aggregates using membrane chromatography
Wang L, Ghosh R |
| 317 - 326 |
CO2 transfer in an aqueous potassium carbonate liquid membrane module with dense polymeric supporting layers: Influence of concentration, circulation flow rate and temperature
Shalygin MG, Roizard D, Favre E, Teplyakov VV |
| 327 - 333 |
Analyzing diffusion behaviors of methanol/water through MFI membranes by molecular simulation
Yang JZ, Chen Y, Zhu AM, Liu QL, Wu JY |
| 334 - 339 |
Fouling characterization in aerobic granulation coupled baffled membrane separation unit
Thanh BX, Visvanathan C, Sperandio M, Ben Aim R |
| 340 - 345 |
Selective transport and removal of Cd from chloride solutions by polymer inclusion membranes
Pont N, Salvado V, Fontas C |
| 346 - 354 |
Formation of a defect-free Pd-Cu-Ni ternary alloy membrane on a polished porous nickel support (PNS)
Ryi SK, Park JS, Kim SH, Kim DW, Cho KI |
| 355 - 362 |
A study on the preferable preparation method of SPEEK/BPO4 composite membranes via an in situ sol-gel process
Cho E, Park JS, Park SH, Choi YW, Yang TH, Yoon YG, Kim CS, Lee WY, Park SB |
| 363 - 372 |
Macrovoid evolution and critical factors to form macrovoid-free hollow fiber membranes
Peng N, Chung TS, Wang KY |
| 373 - 378 |
Permeation selectivity of gaseous isotopes through dense polymers: Peculiar behavior of the hydrogen isotopes
Agrinier P, Roizard D, Ruiz-Lopez MF, Favre E |
| 379 - 386 |
Regularized Stokeslets solution for 2-D flow in dead-end microfiltration: Application to bacterial deposition and fouling
Cogan NG, Chellam S |
| 387 - 396 |
Effect of selective layer thickness on pervaporation of composite poly(vinyl alcohol)-poly(sulfone) membranes
Hyder MN, Huang RYM, Chen P |
| 397 - 404 |
Selective rejection of a water-soluble nerve agent stimulant using a nanoporous lyotropic liquid crystal-butyl rubber vapor barrier material: Evidence for a molecular size-discrimination mechanism
Lu XY, Nguyen V, Zeng XH, Elliott BJ, Gin DL |
| 405 - 412 |
Fabrication of antifouling polyethersulfone ultrafiltration membranes using Pluronic F127 as both surface modifier and pore-forming agent
Zhao W, Su YL, Li C, Shi Q, Ning X, Jiang ZY |
| 413 - 421 |
ZrO2 and TiO2 membranes for nanofiltration and pervaporation - Part 2. Development of ZrO2 and TiO2 toplayers for pervaporation
Van Gestel T, Sebold D, Kruidhof H, Bouwmeester HJM |
| 422 - 428 |
Poly(vinylidene fluoride)-polydiphenylamine composite electrospun membrane as high-performance polymer electrolyte for lithium batteries
Gopalan AI, Lee KP, Manesh KM, Santhosh P |
| 429 - 434 |
Preparation and characterization of a novel bipolar membrane by plasma-induced polymerization
Li SD, Wang CC, Chen CY |
| 435 - 440 |
The effect of a non-woven scrim at the surface of a flat-sheet, microporous membrane on gas-liquid mass transfer
Alvarez JR, Shanahan JW, Semmens MJ |
| 441 - 444 |
Weak-base anion exchange membranes by amination of chlorinated polypropylene with polyethyleneimine at low temperatures
Hong JH, Li D, Wang HT |
| 445 - 451 |
Effect of composite pore-former on the fabrication and performance of anode-supported membranes for SOFCs
Hu JY, Lu Z, Chen KF, Huang XQ, Ai N, Du XB, Fu CW, Wang JM, Su WH |
| 452 - 457 |
Facilitated transport of dibutylphosphate across fixed-site membrane
Gupta KK, Misra SK, Tripathi SC, Dakshinamoorthy A, Pandey AK, Reddy AVR |
| 458 - 466 |
Influence of membrane support layer hydrophobicity on water flux in osmotically driven membrane processes
McCutcheon JR, Elimelech M |
| 467 - 476 |
Electric transport of sulfuric acid through anion-exchange membranes in aqueous solutions
Koter S, Kultys M |
| 477 - 477 |
Au(I) extraction by LIX-79n-heptane using the pseudo-emulsion-based hollow-fiber strip dispersion (PEHFSD) technique (vol 300, pg 147, 2007)
Sonawane JV, Pabby AK, Sastre AM |
