| 1 - 8 |
One-step synthesis of branched sulfur/polypyrrole nanocomposite cathode for lithium rechargeable batteries
Zhang YG, Bakenov Z, Zhao Y, Konarov A, The NLD, Malik M, Paron T, Chen P |
| 9 - 17 |
Effects of the PdO nanoflake support on electrocatalytic activity of Pt nanoparticles toward methanol oxidation in acidic solutions
Chen CS, Pan FM |
| 18 - 23 |
Microbial fuel cell operation with intermittent connection of the electrical load
Grondin F, Perrier M, Tartakovsky B |
| 24 - 34 |
Direct two-dimensional electrochemical impedance spectra simulation for solid oxide fuel cell
Shi YX, Wang HJ, Cai NS |
| 35 - 45 |
The effect of thermal treatment on structure and surface composition of PtCo electro-catalysts for application in PEMFCs operating under automotive conditions
Stassi A, Gatto I, Monforte G, Baglio V, Passalacqua E, Antonucci V, Arico AS |
| 46 - 51 |
Ni foam as the current collector for high capacity C-Si composite electrode
Sa QN, Wang Y |
| 52 - 57 |
Calendering effects on the physical and electrochemical properties of Li[Ni1/3Mn1/3Co1/3]O-2 cathode
Zheng HH, Tan L, Liu G, Song XY, Battaglia VS |
| 58 - 66 |
Effects of platinum on photo-assisted electrocatalytic activity of fringe-shaped highly ordered mesoporous titanium dioxide film
Guo YX, He JP, Wu SC, Wang T, Li GX, Hu YY, Xue HR, Sun X, Tang J, Liu MZ |
| 67 - 73 |
Methylene ethylene carbonate: Novel additive to improve the high temperature performance of lithium ion batteries
Chalasani D, Li J, Jackson NM, Payne M, Lucht BL |
| 74 - 85 |
A review of application of carbon nanotubes for lithium ion battery anode material
de las Casas C, Li WZ |
| 86 - 95 |
Screen-printed (La,Sr)CrO3 coatings on ferritic stainless steel interconnects for solid oxide fuel cells using nanopowders prepared by means of ultrasonic spray pyrolysis
Brylewski T, Dabek J, Przybylski K, Morgiel J, Rekas M |
| 96 - 119 |
Support materials for PEMFC and DMFC electrocatalysts-A review
Sharma S, Pollet BG |
| 120 - 130 |
Analysis of an ethanol-fuelled solid oxide fuel cell system using partial anode exhaust gas recirculation
Saebea D, Patcharavorachot Y, Arpornwichanop A |
| 131 - 137 |
Direct borohydride/peroxide fuel cells using Prussian Blue cathodes
Santos DMF, Saturnino PG, Lobo RFM, Sequeira CAC |
| 138 - 143 |
Electrochemical in situ polymerization of reduced graphene oxide/polypyrrole composite with high power density
Wang JP, Xu YL, Zhu JB, Ren PG |
| 144 - 152 |
Synthesis and characterization of sulfonated polytriazole-clay proton exchange membrane by in situ polymerization and click reaction for direct methanol fuel cells
Huang YJ, Ye YS, Syu YJ, Hwang BJ, Chang FC |
| 153 - 158 |
Optimized energy conversion efficiency in solid-oxide fuel cells implementing SrMo1-xFexO3-delta perovskites as anodes
Martinez-Coronado R, Alonso JA, Aguadero A, Fernandez-Diaz MT |
| 159 - 164 |
Studies on palladium coated titanium foams cathode for Mg-H2O2 fuel cells
Shu CZ, Wang ED, Jiang LH, Tang QW, Sun GQ |
| 165 - 169 |
Elastic behavior of crystalline Li-Sn phases with increasing Li concentration
Stournara ME, Guduru PR, Shenoy VB |
| 170 - 175 |
Carbon supported cobalt oxide nanoparticles-iron phthalocyanine as alternative cathode catalyst for oxygen reduction in microbial fuel cells
Ahmed J, Yuan Y, Zhou LH, Kim S |
| 176 - 179 |
Proton exchange membranes based on poly(2,5-benzimidazole) and sulfonated poly(ether ether ketone) for fuel cells
Zheng HT, Luo HZ, Mathe M |
| 180 - 186 |
Characteristics of heat and mass transport in a passive direct methanol fuel cell operated with concentrated methanol
He YL, Miao Z, Yang WW |
| 187 - 192 |
Crumpled graphene particles for microbial fuel cell electrodes
Xiao L, Damien J, Luo JY, Jang HD, Huang JX, He Z |
| 193 - 196 |
High conductivity of dense tetragonal Li7La3Zr2O12
Wolfenstine J, Rangasamy E, Allen JL, Sakamoto J |
| 197 - 202 |
The surface treatment of Ti meshes for use in large-area flexible dye-sensitized solar cells
Xiao YM, Wu JH, Yue GT, Lin JM, Huang ML, Fan LQ, Lan Z |
| 203 - 209 |
Oxygen reduction reaction on a polypyrrole-modified, carbon-supported cobalt hydroxide catalyst
Qin HY, Zhu KN, Ye LQ, Li ZP |
| 210 - 224 |
Thermal runaway caused fire and explosion of lithium ion battery
Wang QS, Ping P, Zhao XJ, Chu GQ, Sun JH, Chen CH |
| 225 - 231 |
Enhanced ionic conductivity of Ce0.8Sm0.2O2-delta by Sr addition
Gao Z, Liu XM, Bergman B, Zhao Z |
| 232 - 236 |
Oxygen and hydrogen gas recombination in NiMH cells
Ye Z, Noreus D |
| 237 - 241 |
Influence of lithium content on the electrochemical performance of Li1+x(Mn0.533Ni0.233Co0.233)(1-x)O-2 cathode materials
Tang ZH, Wang ZX, Li XH, Peng WJ |
| 242 - 247 |
Investigation of nanostructured platinum-nickel supported on the titanium surface as electrocatalysts for alkaline fuel cells
Tamasauskaite-Tamasiunaite L, Balciunaite A, Vaiciukeviciene A, Selskis A, Pakstas V |
| 248 - 256 |
Experimental investigation of water droplet emergence in a model polymer electrolyte membrane fuel cell microchannel
Wu TC, Djilali N |
| 257 - 262 |
Fundamental studies on direct ammonia fuel cell employing anion exchange membrane
Suzuki S, Muroyama H, Matsui T, Eguchi K |
| 263 - 270 |
Cross-linked gel polymer electrolyte containing multi-wall carbon nanotubes for application in dye-sensitized solar cells
Benedetti JE, Correa AA, Carmello M, Almeida LCP, Goncalves AS, Nogueira AF |
| 271 - 275 |
Application of quasi-solid-state silica nanoparticles-ionic liquid composite electrolytes to all-solid-state lithium secondary battery
Ito S, Unemoto A, Ogawa H, Tomai T, Honma I |
| 276 - 281 |
Preparation and characterization of La0.75Sr0.25Cr0.5Mn0.5O3-delta-yttria stabilized zirconia cathode supported solid oxide electrolysis cells for hydrogen generation
Xing RM, Wang YR, Liu SH, Jin C |
| 282 - 287 |
High-rate capability of Li3V2(PO4)(3)/C composites prepared via a polyvinylpyrrolidone-assisted sol-gel method
Wang H, Li YJ, Huang CH, Zhong YD, Liu SQ |
| 288 - 295 |
Preparation, characterization and degradation mechanisms of PtCu alloy nanoparticles for automotive fuel cells
Marcu A, Toth G, Srivastava R, Strasser P |
| 296 - 305 |
Calendar aging of a graphite/LiFePO4 cell
Kassem M, Bernard J, Revel R, Pelissier S, Duclaud F, Delacourt C |
| 306 - 315 |
Carbon monoxide and methanol oxidation on potential-modified Pt-Ru/C electrocatalyst for polymer electrolyte fuel cells
Velazquez-Palenzuela A, Brillas E, Arias C, Centellas F, Garrido JA, Rodriguez RM, Cabot PL |
| 316 - 321 |
Anatase TiO2 beads having ultra-fast electron diffusion rates for use in low temperature flexible dye-sensitized solar cells
Ke CR, Ting JM |
| 322 - 327 |
High efficiency energy harvesting from microbial fuel cells using a synchronous boost converter
Park JD, Ren ZY |
| 328 - 339 |
Generalized flooded agglomerate model for the cathode catalyst layer of a polymer electrolyte membrane fuel cell
Kamarajugadda S, Mazumder S |
| 340 - 344 |
3D porous LiFePO4/graphene hybrid cathodes with enhanced performance for Li-ion batteries
Yang JL, Wang JJ, Wang DN, Li XF, Geng DS, Liang GX, Gauthier M, Li RY, Sun XL |
| 345 - 353 |
Highly conductive electrospun carbon nanofiber/MnO2 coaxial nano-cables for high energy and power density supercapacitors
Zhi MJ, Manivannan A, Meng FK, Wu NQ |
| 354 - 365 |
Determination of effective transport properties in a PEMFC catalyst layer using different reconstruction algorithms
Lange KJ, Sui PC, Djilali N |
| 366 - 373 |
Cold start characteristics and freezing mechanism dependence on start-up temperature in a polymer electrolyte membrane fuel cell
Tabe Y, Saito M, Fukui K, Chikahisa T |
| 374 - 377 |
Performance degradation of a direct methanol fuel cell by an eluted plasticizer
Aoki R, Sakurai S, Tsujiguchi T, Nakagawa N |
| 378 - 382 |
A prediction model based on artificial neural network for surface temperature simulation of nickel-metal hydride battery during charging
Fang KZ, Mu DB, Chen S, Wu BR, Wu F |
| 383 - 390 |
Numerical simulation of gas diffusion effects on charge/discharge characteristics of a solid oxide redox flow battery
Ohmori H, Uratani S, Iwai H |
| 391 - 396 |
Effect of binder materials on cycling performance of Fe2O3 electrodes in alkaline solution
Kitamura H, Zhao LW, Hang BT, Okada S, Yamaki J |
| 397 - 403 |
Niobized AISI 304 stainless steel bipolar plate for proton exchange membrane fuel cell
Wang LX, Sun JC, Li PB, Jing B, Li S, Wen ZS, Ji SJ |
| 404 - 408 |
Fabrication of micro lithium-ion battery with 3D anode and 3D cathode by using polymer wall
Yoshima K, Munakata H, Kanamura K |
| 409 - 414 |
Direct decomposition of methane over Ni catalyst supported in magnesium aluminate
Nuernberg GDB, Foletto EL, Campos CEM, Fajardo HV, Carreno NLV, Probst LFD |
| 415 - 420 |
Effect of oxygen partial pressure on the electrochemical impedance of La0.8Sr0.2MnO3-delta/Zr0.92Y0.08O2 porous composite anodes in solid oxide electrolysis cell
Wang J, Zhang Y, Liang TX, Deng CS, Xu JM |
| 421 - 425 |
Poly(tetrafluoroethylene) reinforced sulfonated poly(ether ether ketone) membranes for vanadium redox flow battery application
Wei WP, Zhang HM, Li XF, Mai ZS, Zhang HZ |
| 426 - 433 |
Tailoring structural and electrochemical properties of vertical aligned carbon nanotubes on metal foil using scalable wet-chemical catalyst deposition
Dorfler S, Felhosi I, Kek I, Marek T, Althues H, Kaskel S, Nyikos L |
| 434 - 439 |
Cu-Si1-xGex core shell nanowire arrays as three-dimensional electrodes for high-rate capability lithium-ion batteries
Wang JZ, Du N, Zhang H, Yu JX, Yang DR |
| 440 - 446 |
On the synthesis conditions for tailoring lithium composition in ramsdellite phases: Application for Li-ion batteries
Soares A, Fraisse B, Morato F, Ionica-Bousquet CM, Monconduit L |
| 447 - 451 |
High-capacity phase formation by surface modification of Li3PO4 on nanosized Li2RuO3 electrode for lithium batteries
Zheng YM, Taminato S, Xu YL, Suzuki K, Kim K, Hirayama M, Kanno R |
