| 163 - 174 |
Study of LiFeO2 coated NiO as cathodes for MCFC by electrochemical impedance spectroscopy
Huang B, Yu QC, Wang HM, Chen G, Hu KA |
| 175 - 182 |
Inorganic proton-conducting gel glass/porous alumina nanocomposite
Park YI, Nagai M, Kim JD, Kobayashi K |
| 183 - 195 |
Performance equations for cathodes in polymer electrolyte fuel cells with non-uniform water flooding in gas diffusers
Hsuen HK |
| 196 - 205 |
Wide range load controllable MCFC cycle with pressure swing operation
Yoshiba F, Izaki Y, Watanabe T |
| 206 - 215 |
Simulation analysis of a system combining solid oxide and polymer electrolyte fuel cells
Yokoo M, Take T |
| 216 - 221 |
Enhancement of hydrogen oxidation activity at a nickel coated carbon beads electrode by cobalt and iron
Chatterjee AK, Banerjee R, Sharon M |
| 222 - 227 |
Highly-optimized membrane electrode assembly for direct methanol fuel cell prepared by sedimentation method
Liu JH, Jeon MK, Choi WC, Woo SI |
| 228 - 238 |
A one dimensional model of a methanol fuel cell anode
Scott K, Argyropoulos P |
| 239 - 247 |
LCA of a molten carbonate fuel cell system
Lunghi P, Bove R, Desideri U |
| 248 - 256 |
Development of direct methanol alkaline fuel cells using anion exchange membranes
Yu EH, Scott K |
| 257 - 263 |
A comparative study of PtRu and PtRuSn thermally formed on titanium mesh for methanol electro-oxidation
Yang LX, Allen RG, Scott K, Christenson P, Roy S |
| 264 - 268 |
The advantages of air addition on the methane steam reforming over Ni/-gamma-Al2O3
Dias JAC, Assaf JM |
| 269 - 276 |
Fuel cell development for space applications: fuel cell system in a closed environment
Sone Y, Ueno M, Kuwajima S |
| 277 - 283 |
Design and fabrication of pumpless small direct methanol fuel cells for portable applications
Shimizu T, Momma T, Mohamedi M, Osaka T, Sarangapani S |
| 284 - 287 |
Electrochemical properties of composite polymer electrolyte applied to rechargeable lithium polymer battery
Matoba Y, Matsui S, Tabuchi M, Sakai T |
| 288 - 308 |
Influence of H2SO4 concentration on the mechanism of the processes and on the electrochemical activity of the Pb/Pb02/PbSO4 electrode
Pavlov D, Kirchev A, Stoycheva M, Monahov B |
| 309 - 316 |
Effects of rapid quenching on the electrochemical performances and microstructures of the Mm(NiMnSiAl)(4.3)Co0.6-xFex (x=0-0.6) electrode alloys
Zhang YH, Wang GQ, Dong XP, Guo SH, Wang XL |
| 317 - 321 |
Separators for nickel metal hydride and nickel cadmium batteries designed to reduce self-discharge rates
Kritzer P |
| 322 - 328 |
Performance evaluation of poly(N-methylaniline) and polyisothianaphthene in charge-storage devices
Sivakkumar SR, Saraswathi R |
