| 3389 - 3394 |
Effect of Ni nanoparticle distribution on hydrogen uptake in carbon nanotubes
Lin KY, Tsai WT, Yang TJ |
| 3395 - 3403 |
Investigation of path dependence in commercial lithium-ion cells chosen for plug-in hybrid vehicle duty cycle protocols
Gering KL, Sazhin SV, Jamison DK, Michelbacher CJ, Liaw BY, Dubarry M, Cugnet M |
| 3404 - 3413 |
Development of carbon conductive additives for advanced lithium ion batteries
Spahr ME, Goers D, Leone A, Stallone S, Grivei E |
| 3414 - 3419 |
Effect of discharge rate on charging a lead-acid battery simulated by mathematical model
Cugnet M, Liaw BY |
| 3420 - 3425 |
Identifying battery aging mechanisms in large format Li ion cells
Dubarry M, Liaw BY, Chen MS, Chyan SS, Han KC, Sie WT, Wu SH |
| 3426 - 3432 |
Fe-II/Fe-III mixed-valence state induced by Li-insertion into the metal-organic-framework Mil53(Fe): A DFT+U study
Combelles C, Ben Yahia M, Pedesseau L, Doublet ML |
| 3433 - 3438 |
Characterization of low-flammability electrolytes for lithium-ion batteries
Sazhin SV, Harrup MK, Gering KL |
| 3439 - 3442 |
The influence of compositional change of 0.3Li(2)MnO(3).0.7LiMn(1-x)Ni(y)Co(0.1)O(2) (0.2 <= x <= 0.5, y = x-0.1) cathode materials prepared by co-precipitation
Jeong JH, Jin BS, Kim WS, Wang GX, Kim HS |
| 3443 - 3447 |
Measurement of three-dimensional microstructure in a LiCoO2 positive electrode
Wilson JR, Cronin JS, Barnett SA, Harris SJ |
| 3448 - 3451 |
Towards a rechargeable alcohol biobattery
Addo PK, Arechederra RL, Minteer SD |
| 3452 - 3460 |
Hygro-thermal mechanical behavior of Nafion during constrained swelling
Silberstein MN, Boyce MC |
| 3461 - 3469 |
Influence of rare-earth doping on the microstructure and conductivity of BaCe(0.9)Ln(01)O(3-delta) proton conductors
Amsif M, Marrero-Lopez D, Ruiz-Morales JC, Savvin SN, Gabas M, Nunez P |
| 3470 - 3478 |
Tuning transport properties by manipulating the phase segregation of tetramethyldisiloxane segments in modified polyimide electrolytes
Tseng CY, Ye YS, Joseph J, Kao KY, Rick J, Huang SL, Hwang BJ |
| 3479 - 3484 |
Influence of ageing in fuel cell on membrane/electrodes interfaces
Danerol AS, Bas C, Flandin L, Claude E, Alberola ND |
| 3485 - 3495 |
Power generation enhancement of solid oxide fuel cell by cathode electrolyte interface modification in mesoscale assisted by level set-based optimization calculation
Iwai H, Kuroyanagi A, Saito M, Konno A, Yoshida H, Yamada T, Nishiwaki S |
| 3496 - 3502 |
Development of a new highly conductive and thermomechanically stable complex membrane based on sulfonated polyimide/ionic liquid for high temperature anhydrous fuel cells
Deligoz H, Yilmazoglu M |
| 3503 - 3512 |
Kinetic analysis of carbon monoxide and methanol oxidation on high performance carbon-supported Pt-Ru electrocatalyst for direct methanol fuel cells
Velazquez-Palenzuela A, Centellas F, Garrido JA, Arias C, Rodriguez RM, Brillas E, Cabot PL |
| 3513 - 3522 |
Electrochemical characterization of the surface and methanol electrooxidation on Pt-Rh-Pd ternary alloys
Soszko M, Lukaszewski M, Mianowska Z, Czerwinski A |
| 3523 - 3529 |
Carbon-supported Pd-Pt cathode electrocatalysts for proton exchange membrane fuel cells
Tang YF, Zhang HM, Zhong HX, Xu T, Jin H |
| 3530 - 3538 |
A novel design of solid-state NaBH4 composite as a hydrogen source for 2 W PEMFC applications
Hsueh CL, Liu CH, Chen BH, Lee MS, Chen CY, Lu YW, Tsau F, Ku JR |
| 3539 - 3543 |
Desirable performance of intermediate-temperature solid oxide fuel cell with an anode-supported La0.9Sr0.1Ga0.8Mg0.2O3-delta electrolyte membrane
Wang WB, Yang ZJ, Wang HT, Ma GL, Gao WJ, Zhou ZF |
| 3544 - 3547 |
Nano-structured cathodes based on La0.6Sr0.4Co0.2Fe0.8O3-delta for solid oxide fuel cells
Kim JH, Park YM, Kim H |
| 3548 - 3552 |
A highly ordered Fe-N-C nanoarray as a non-precious oxygen-reduction catalyst for proton exchange membrane fuel cells
Lei M, Li PG, Li LH, Tang WH |
| 3553 - 3558 |
Redox stable Ni-YSZ anode support in solid oxide fuel cell stack configuration
Faes A, Wuillemin Z, Tanasini P, Accardo N, Van Herle J |
| 3559 - 3564 |
In-plane gas permeability of proton exchange membrane fuel cell gas diffusion layers
Tamayol A, Bahrami M |
| 3565 - 3571 |
A novel approach to determine the in-plane thermal conductivity of gas diffusion layers in proton exchange membrane fuel cells
Sadeghi E, Djilali N, Bahrami M |
| 3572 - 3582 |
1D modeling of a flowing electrolyte-direct methanol fuel cell
Colpan CO, Cruickshank CA, Matida E, Hamdullahpur F |
| 3583 - 3591 |
High-temperature mechanical properties of a solid oxide fuel cell glass sealant in sintered forms
Chang HT, Lin CK, Liu CK, Wu SH |
| 3592 - 3603 |
Focused ion beam-scanning electron microscopy on solid-oxide fuel-cell electrode: Image analysis and computing effective transport properties
Gunda NSK, Choi HW, Berson A, Kenney B, Karan K, Pharoah JG, Mitra SK |
| 3604 - 3610 |
Self-discharge behavior of polyacenic semiconductor and graphite negative electrodes for lithium-ion batteries
Ohue K, Utsunomiya T, Hatozaki O, Yoshimoto N, Egashira M, Morita M |
| 3611 - 3622 |
Synthesis and electrochemical characterization of Fe and Ni substituted Li2MnO3-An effective means to use Fe for constructing "Co-free" Li2MnO3 based positive electrode material
Tabuchi M, Nabeshima Y, Takeuchi T, Kageyama H, Tatsumi K, Akimoto J, Shibuya H, Imaizumi J |
| 3623 - 3632 |
Lithium bis(fluorosulfonyl)imide (LiFSI) as conducting salt for nonaqueous liquid electrolytes for lithium-ion batteries: Physicochemical and electrochemical properties
Han HB, Zhou SS, Zhang DJ, Feng SW, Li LF, Liu K, Feng WF, Nie J, Li H, Huang XJ, Armand M, Zhou ZB |
| 3633 - 3639 |
A modified carbothermal reduction method for preparation of high-performance nano-scale core/shell Cu6Sn5 alloy anodes in Li-ion batteries
Cui WJ, Wang F, Wang J, Liu HJ, Wang CX, Xia YY |
| 3640 - 3645 |
Electrochemical performance of spinel LiMn2O4 cathode materials made by flame-assisted spray technology
Zhang XF, Zheng HH, Battaglia V, Axelbaum RL |
| 3646 - 3649 |
High-rate cathodes based on Li3V2(PO4)(3) nanobelts prepared via surfactant-assisted fabrication
Pan AQ, Choi DW, Zhang JG, Liang SQ, Cao GZ, Nie ZM, Arey BW, Liu J |
| 3650 - 3654 |
High stability and superior rate capability of three-dimensional hierarchical SnS2 microspheres as anode material in lithium ion batteries
Zai JT, Wang KX, Su YZ, Qian XF, Chen JS |
| 3655 - 3658 |
Highly dispersed sulfur in ordered mesoporous carbon sphere as a composite cathode for rechargeable polymer Li/S battery
Liang XA, Wen ZY, Liu Y, Zhang H, Huang LZ, Jin J |
| 3659 - 3663 |
LiFexMn1-xPO4: A cathode for lithium-ion batteries
Hong JA, Wang F, Wang XL, Graetz J |
| 3664 - 3668 |
Atomistic mechanisms of lithium insertion in amorphous silicon
Huang S, Zhu T |
| 3669 - 3672 |
Towards understanding the poor thermal stability of V5+ electrolyte solution in Vanadium Redox Flow Batteries
Vijayakumar M, Li LY, Graff G, Liu J, Zhang HM, Yang ZG, Hu JA |
| 3673 - 3677 |
Highly durable and active non-precious air cathode catalyst for zinc air battery
Chen Z, Choi JY, Wang HJ, Li H, Chen ZW |
| 3678 - 3682 |
Pore-size effect on photovoltaic performance of dye-sensitized solar cells composed of mesoporous anatase-titania
Yun TK, Park SS, Kim D, Hwang YK, Huh S, Bae JY, Won YS |
| 3683 - 3687 |
High efficiency flexible dye-sensitized solar cells by multiple electrophoretic depositions
Chiu WH, Lee KM, Hsieh WF |
