| J9 - J13 |
A new strategy for synthesis of novel classes of room-temperature ionic liquids based on complexation reaction of cations
Huang JF, Luo HM, Dai S |
| L3 - L3 |
Characterization of 5-aminotetrazole as a corrosion inhibitor in copper chemical mechanical polishing (vol 152, pg 827, 2005)
Lee JW, Kang MC, Kim JJ |
| L4 - L4 |
Structural and electrical characterizations of yttrium oxide films after postannealing treatments (vol 152, 217, 2005)
Durand C, Dubourdieu C, Vallee C, Gautier E, Ducroquet F, Jalabert D, Roussel H, Bonvalot M, Joubert O |
| B25 - B32 |
Microprobe study of pH during the induction period preceding crevice corrosion
Wolfe RC, Pickering HW, Shaw BA |
| B33 - B41 |
An in situ Raman-electrochemical investigation of carbon steel corrosion in Na2CO3/NaHCO3, Na2SO4, and NaCl solutions
Lee CT, Odziemkowski MS, Shoesmith DW |
| B42 - B51 |
Transition from intergranular corrosion to intergranular stress corrosion cracking in AA2024-T3
Liu XD, Frankel GS, Zoofan B, Rokhlin SI |
| B52 - B60 |
Improvement of corrosion behavior of A3xx.x/SiCp composites in 3.5 wt % NaCl solution by Ce surface coatings
Pardo A, Merino MC, Arrabal R, Viejo F, Carboneras M |
| C91 - C96 |
Photoconductive antimony sulfide-selenide thin films produced by heating a chemically deposited Se-Sb2S3 layer
Suarez-Sandoval DY, Nair MTS, Nair PK |
| C97 - C107 |
Vibrational spectroscopic and mass spectrometric studies of the interaction of bis(3-sulfopropyl)-disulfide with Cu surfaces
Schultz ZD, Feng ZV, Biggin ME, Gewirth AA |
| D21 - D29 |
Partial oxidation of n-butane in a solid electrolyte membrane reactor -Influence of electrochemical oxygen pumping
Ye YM, Rihko-Struckmann L, Munder B, Sundmacher K |
| E11 - E16 |
Influence of coloring voltage and thickness on electrochromical properties of e-beam evaporated WO3 thin films
Azimirad R, Akhavan O, Moshfegh AZ |
| E17 - E24 |
Current distribution at a disk electrode during a current pulse
Antohi P, Scherson DA |
| E25 - E32 |
Time-resolved photoluminescence analysis of multidose Si-ion-implanted SiO2
Lin CJ, Lee CK, Diau EWG, Lin GR |
| E33 - E37 |
On the electrochemical reduction of the herbicide picloram on mercury electrodes
Corredor MC, Mellado JMR, Montoya MR |
| E38 - E43 |
Negative shifts in the flatband potential by adsorption of iodide ions on surface-alkylated and Pt nanodotted n-Si(111) electrodes for improvement of solar cell characteristics
Takabayashi S, Kato N, Nakato Y |
| F27 - F28 |
Extraction of acceleration factor parameters based on the E model
Le HA, Banerjee P, Chen AS, Ditali A |
| F29 - F34 |
Ge MOS capacitors with thermally evaporated HfO2 as gate dielectric
Garg R, Misra D, Swain PK |
| H19 - H22 |
Effect of adjacent metal and dopant on Pd-metal induced lateral crystallization
Kim YS, Kim MS, Joo SK |
| H23 - H28 |
"Total NOx" sensing elements with compositionally identical oxide electrodes
West DL, Montgomery FC, Armstrong TR |
| H29 - H33 |
Characteristics of indium zinc oxide top cathode layers grown by box cathode sputtering for top-emitting organic light-emitting diodes
Kim HK, Lee KS, Kang HA |
| H34 - H37 |
Phosphor microparticles of controlled three-dimensional shape from phytoplankton
Weatherspoon MR, Haluska MS, Cai Y, King JS, Summers CJ, Snyder RL, Sandhage KH |
| A203 - A209 |
Study of Pt electrode/Nafion ionomer interface in HClO4 by in situ surface-enhanced FTIR spectroscopy
Ayato Y, Kunimatsu K, Osawa M, Okada T |
| A210 - A215 |
Phase stability of nickel hydroxides and oxyhydroxides
Van der Ven A, Morgan D, Meng YS, Cederc G |
| A216 - A224 |
Thermal-electrochemical modeling of a proton exchange membrane fuel cell
Hwang JJ |
| A225 - A232 |
Liquid water removal from a polymer electrolyte fuel cell
Zhang FY, Yang XG, Wang CY |
| A233 - A238 |
On the steady-state oxygen permeation through La2NiO4+delta membranes
Smith JB, Norby T |
| A239 - A248 |
Polyethylene glycol functionalized polyoctahedral silsesquioxanes as electrolytes for lithium batteries
Zhang HJ, Kulkarni S, Wunder SL |
| A249 - A254 |
Nonisothermal modeling of polymer electrolyte fuel cells II. Parametric study of low-humidity operation
Ju HC, Wang CY, Cleghorn S, Beuscher U |
| A255 - A260 |
Fabrication of thin-film, flexible, and transparent electrodes composed of ruthenic acid nanosheets by electrophoretic deposition and application to electrochemical capacitors
Sugimoto W, Yokoshima K, Ohuchi K, Murakami Y, Takasu Y |
| A261 - A269 |
Layered Li1+x (Ni0.425Mn0.425Co0.15)(1-x)O-2 positive electrode materials for lithium-ion batteries
Tran N, Croguennec L, Labrugere C, Jordy C, Biensan P, Delmas C |
| A270 - A274 |
Lithium electrochemistry of a novel SnSe thin-film anode
Xue MZ, Yao J, Cheng SC, Fu ZW |
| A275 - A281 |
Structural evolution of Li3+xFe, (MoO4)(3) upon lithium insertion in the compositional range 0 <= x <= 1
de Dompablo MEAY, Alvarez-Vera M, Baehtz C, Amador U |
| A282 - A287 |
A comparison of the reactions of the SiSn, SiAg, and SiZn binary systems with L3i
Hatchard TD, Obrovac MN, Dahn JR |
| A288 - A294 |
Possible redox shuttle additives for chemical overcharge and overdischarge protection for lithium-ion batteries
Buhrmester C, Moshurchak L, Wang RCL, Dahn JR |
| A295 - A300 |
Formation of Li1+nV3O8/beta-Li1/3V2O5/C nanocomposites by carboreduction and the resulting improvement in Li capacity retention
Dubarry M, Gaubicher J, Moreau P, Guyomard D |
| A301 - A309 |
A new kinetic equation for intercalation electrodes
Zhang Q, Guo QZ, White RE |
| A310 - A315 |
Dependence of the heat of reaction of Li0.81C6 (0.1 V), Li7Ti5O12, (1.55 V), and Li0.5VO2 (2.45 V) reacting with nonaqueous solvents or electrolytes on the average potential of the electrode material
Jiang JW, Dahn JR |
| A316 - A320 |
Capacity fade of Li1+xMn2-xO4-based lithium-ion cells
Chen ZH, Amine K |
| A321 - A328 |
Supercapacitor performance of hydrous ruthenium oxide electrodes prepared by electrophoretic deposition
Jang JH, Kato A, Machida K, Naoi K |
| A329 - A333 |
Thermal behavior of lithiated graphite with electrolyte in lithium-ion batteries
Wang QS, Sun JH, Yao XL, Chen CH |
| A334 - A338 |
Hydrous RuO2/carbon black nanocomposites with 3D porous structure by novel incipient wetness method for supercapacitors
Min M, Machida K, Jang JH, Naoi K |
| A339 - A342 |
Intermediate-temperature fuel cell employing CsH2PO4/SiP2O7-based composite electrolytes
Matsui T, Kukino T, Kikuchi R, Eguchi K |
| A343 - A347 |
Microfabricated fuel cell with composite glass/Nafion proton exchange membrane
Li J, Moore CW, Bhusari D, Prakash S, Kohl PA |
| A348 - A353 |
Improvement of degradation at elevated temperature and at high state-of-charge storage by ZrO2 coating on LiCoO2
Miyashiro H, Yamanaka A, Tabuchi M, Seki S, Nakayama M, Ohno Y, Kobayashi Y, Mita Y, Usami A, Wakihara M |
| A354 - A360 |
Mixed ionic-electronic YSZ/Ni composite for SOFC anodes with high electrical conductivity
Fonseca FC, de Florio DZ, Esposito V, Traversa E, Muccillo ENS, Muccillo R |
| A361 - A365 |
Combinatorial study of Sn1-xCox (0 < x < 0.6) and [Sn0.55Co0.45](1-y)C-y (0 < y < 0.5) alloy negative electrode materials for Li-ion batteries
Dahn JR, Mar RE, Abouzeid A |
| A366 - A371 |
Toward improving the performance of PEM fuel cell by using mix metal electrodes prepared by dual IBAD
Gulla AF, Saha MS, Allen RJ, Mukerjee S |
| A372 - A382 |
A two-dimensional two-phase model of a PEM fuel cell
Lin GY, Van Nguyen T |
| A383 - A389 |
Electrochemical characterization of hydrous ruthenium oxide thin-film electrodes for electrochemical capacitor applications
Kim IH, Kim KB |
| A390 - A395 |
Influence of solvents on the structural and electrochemical properties of Li[Li0.2Ni0.1Co0.2Mn0.5]O-2 prepared by a solvothermal reaction method
Song CH, Stephan AM, Jeong SK, Hwang YJ, Kim AR, Nahm KS |
| A396 - A405 |
In-plane effects in large-scale PEMFCs - Model formulation and validation
Freunberger SA, Santis M, Schneider IA, Wokaun A, Buchi FN |
| A406 - A417 |
Microstructural optimization of anode-supported solid oxide fuel cells by a comprehensive microscale model
Jeon DH, Nam JH, Kim CJ |
| A418 - A424 |
Properties, crystal structure, and performance of o-LiMnO2 as cathode material for Li secondary batteries
Idemoto Y, Mochizuki T, Ui K, Koura N |
| A425 - A430 |
Nano Si cluster-SiOx-C composite material as high-capacity anode material for rechargeable lithium batteries
Morita T, Takami N |
| A431 - A436 |
Thin-film SOFCs using gastight YSZ thin films on nanoporous substrates
Park YI, Su PC, Cha SW, Saito Y, Prinz FB |
| A437 - A444 |
Novel composite anodes consisting of lithium transition-metal nitrides and transition metal oxides for rechargeable Li-ion batteries
Liu Y, Takeda Y, Matsumura T, Yang J, Imanishi N, Hirano A, Yamamoto O |
| A445 - A449 |
Calculations of oxidation potentials of redox shuttle additives for Li-ion cells
Wang RL, Buhrmester C, Dahn JR |
| A450 - A454 |
Hybrid aqueous energy storage cells using activated carbon and lithium-intercalated compounds I. The C/LiMn2O4 system
Wang YG, Xia YY |
| C108 - C116 |
Origin of the anisotropy in the anodic dissolution of silicon
Outemzabet R, Cherkaoui M, Gabouze N, Ozanam F, Kesri N, Chazalviel JN |
| C117 - C120 |
Enhancement of the ductility of electrodeposited copper films by room-temperature recrystallization
Hasegawa M, Nonaka Y, Negishi Y, Okinaka Y, Osaka T |
| C121 - C126 |
Effect of chloride ions on electrodeposition of CdTe from ammoniacal basic electrolytes
Arai K, Murase K, Hirato T, Awakura Y |
| C127 - C132 |
Curvature enhanced adsorbate coverage model for electrodeposition
Moffat TP, Wheeler D, Kim SK, Josell D |
| G105 - G107 |
Light extraction in GaInN light-emitting diodes using diffuse omnidirectional reflectors
Kim JK, Luo H, Xi YG, Shah JM, Gessmann T, Schubert EF |
| G108 - G118 |
Irradiation-induced deep levels in silicon for power device tailoring
Siemieniec R, Niedernostheide FJ, Schulze HJ, Sudkamp W, Kellner-Werdehausen U, Lutz J |
| G119 - G124 |
Poly(vinylidene fluoride) crystal structure of poly( vinylidene fluoride) and poly( methyl methacrylate) blend after annealing
Horibe H, Taniyama M |
| G125 - G127 |
Selective GaN epitaxy on Si(111) substrates using porous aluminum oxide buffer layers
Napierala J, Buhlmann HJ, Ilegems M |
| G128 - G133 |
Oxide grown on polycrystal silicon by rapid thermal oxidation in N2O
Kao CH, Lai CS, Lee CL |
| G134 - G140 |
Strained-silicon on silicon and strained-silicon on silicon-germanium on silicon by relaxed buffer bonding
Isaacson DM, Taraschi G, Pitera AJ, Ariel N, Langdo TA, Fitzgerald EA |
| G141 - G143 |
Annealing effect of transparent ohmic contacts to n-ZnO epitaxial films
Chiou YZ, Lin KW |
| G144 - G148 |
The CMP process and cleaning solution for planarization of strain-relaxed SiGe virtual substrates in MOSFET applications
Shieh MS, Chen PS, Tsai MJ, Lei TF |
| G149 - G159 |
Organic airborne molecular contamination in semiconductor fabrication clean rooms - A review
Den W, Bai HL, Kang YH |
| G160 - G163 |
Dual-damascene Cu/low-k interconnect fabrication scheme using dissoluble hard mask material
Furusawa T, Machida S, Ryuzaki D, Sameshima K, Ishida T, Ishikawa K, Miura N, Konishi N, Saito T, Yamaguchi H |
| G164 - G167 |
Characterization of tantalum nitride thin films deposited on SiO2/Si substrates using dc magnetron sputtering for thin film resistors
Cuong ND, Kim DJ, Kang BD, Kim CS, Yu KM, Yoon SG |
| G168 - G174 |
Thermal phase transformation of ZnO-based transparent ferromagnetic composite films and the change in magnetic characteristics
Shinagawa T, Izaki M, Murase K, Uruga T, Nakamura T, Matsumura Y, Awakura Y |
| G175 - G181 |
Undercut removal of micrometer-scale particles from surfaces
Kumar G, Beaudoin S |
| G182 - G186 |
Effects of O-2 dissociation on a porous platinum coating in the thermal oxidation of GaAs
Hultquist G, Graham MJ, Wee ATS, Liu R, Sproule GI, Dong Q, Anghel C |
