| S69 - S78 |
Developments in luminescence and display materials over the last 100 years as reflected in electrochemical society publications
Chen R, Lockwood DJ |
| B379 - B386 |
Inhibition of corrosion-related reduction processes via chromium monolayer formation
Clark WJ, McCreery RL |
| B387 - B392 |
In vitro corrosion resistance of orthodontic super stainless steel wire
Oh KT, Hwang CJ, Park YS, Kim KN |
| B393 - B397 |
Influence of hydrogen in iron and in two stainless steels on aqueous and gaseous corrosion
Wallinder D, Hornlund E, Hultquist G |
| B398 - B402 |
Origins of cracking in highly porous anodically grown films on InP
Harvey E, Buckley DN, Chu SNG, Sutton D, Newcomb SB |
| B403 - B408 |
Investigation of filiform corrosion on coated aluminum alloys by FTIR microspectroscopy and scanning Kelvin probe
Le Bozec N, Persson D, Nazarov A, Thierry D |
| B409 - B413 |
The effect of protic doping level on the anticorrosion characteristics of polyaniline in sulfuric acid solutions
Gasparac R, Martin CR |
| B414 - B421 |
In vitro corrosion resistance of orthodontic super stainless steel wire
Oh KT, Hwang CJ, Park YS, Kim KN |
| B422 - B427 |
Monitoring of hydrogen absorption into titanium using resistometry
Azumi K, Asada Y, Ueno T, Seo M, Mizuno T |
| B428 - B439 |
Dealloying and corrosion of Al alloy 2024-T3
Vukmirovic MB, Dimitrov N, Sieradzki K |
| B440 - B449 |
Temperature dependence of crevice corrosion initiation on titanium grade-2
He XH, Noel JJ, Shoesmith DW |
| B450 - B455 |
A study of anodic films and processes on titanium-copper metallic glasses
Metikos-Hukovic M, Bozicevic J, Brinic S |
| C439 - C444 |
Magnetic properties of ultrathin laminated Co/Cu films prepared by electrodeposition
Shima M, Salamanca-Riba L, McMichael RD, Moffat TP |
| C445 - C449 |
Electrosynthesis and physicochemical properties of PbO2 films
Velichenko AB, Amadelli R, Benedetti A, Girendko DV, Kovalyov SV, Danilov FI |
| C450 - C455 |
Chemically selective force mapping of electrochemically generated two-component omega-substituted alkanethiol monolayer gradients by pulsed-force-mode atomic force microscopy
Balss KM, Fried GA, Bohn PW |
| C456 - C463 |
Metal deposition onto a porous silicon layer by immersion plating from aqueous and nonaqueous solutions
Harraz FA, Tsuboi T, Sasano J, Sakka T, Ogata YH |
| C464 - C468 |
Deposition of amorphous SexTe1-x thin film alloys by a novel photochemical deposition technique and their analysis
Kumaresan R, Ichimura M, Sato N, Ramasamy P, Arai E |
| D125 - D131 |
Recycling kraft pulping chemicals with molten salt electrolysis
Wartena R, Winnick J, Pfromm PH |
| D132 - D136 |
Electrochemical oxygen separation using solid electrolyte ion transport membranes
Meixner DL, Brengel DD, Henderson BT, Abrardo JM, Wilson MA, Taylor DM, Cutler RA |
| D137 - D142 |
X-ray absorption studies of poly(vinylferrocene) polymers for anion separation
Balasubramanian M, Giacomini MT, Lee HS, McBreen J, Sukamto JH |
| E311 - E316 |
Determination of the p-electron conduction parameter of Na-beta-alumina by potentiometric measurements
Nafe H, Gollhofer S, Aldinger F |
| E317 - E324 |
The effect of Si doping in (CdS)(1-x-y)(ZnS)(x)Si-y photocatalysts studied by electrochemical impedance spectroscopy and band bending theory
Rincon ME, Martinez MW, Miranda-Hernandez M, Gonzalez I |
| E325 - E330 |
Qualitative analysis of the Frumkin adsorption isotherm of the over-potentially deposited hydrogen at the poly-NiOKOH aqueous electrolyte interface using the phase-shift method
Chun JH, Ra KH, Kim NY |
| E331 - E339 |
Characterization of the viscoelasticity and the surface roughness of electrochemically prepared conducting polymer films by impedance measurements at quartz crystals
Bund A, Schneider M |
| E340 - E347 |
Intermolecular interactions in lactone-based electrolytes
Caillon-Caravanier M, Bosser G, Claude-Montigny B, Lemordant D |
| E348 - E355 |
Electrochemical study of cadmium in acidic zinc chloride-1-ethyl-3-methylimidazolium chloride ionic liquids
Huang JF, Sun IW |
| F103 - F109 |
Analysis of pore and pore-related properties in plasma-enhanced chemical vapor deposition low dielectric constant films
Shioya Y, Maeda K, Ishimaru T, Ohdaira T, Suzuki R |
| F110 - F115 |
Feasibility of nitrogen, or oxygen-incorporated ruthenium titanium ternary diffusion barrier suggested by a new design concept for future high-density memory capacitors
Yoon DS, Roh JS |
| F116 - F121 |
Formation and microstructure of mesoporous silica films with ultralow dielectric constants
Tsai TG, Cho AT, Yang CM, Pan FM, Chao KJ |
| F122 - F130 |
Interactions between nanoporous silica and copper
Rogojevic S, Jain A, Gill WN, Plawsky JL |
| G505 - G509 |
Effect of ion implantation on layer inversion of Ni silicided poly-Si
Lee PS, Pey KL, Mangelinck D, Ding J, Chi DZ, Osipowicz T, Dai JY, Chan L |
| G510 - G516 |
Chemical vapor deposited RuOx films - Effect of oxygen flow rate
Ganesan PG, Eizenberg M, Dornfest C |
| G517 - G521 |
Effects of hydrogen implantation on the structural and electrical properties of nickel silicide
Choi CJ, Ok YW, Hullavarad SS, Seong TY, Lee KM, Lee JH, Park YJ |
| G522 - G525 |
Influence of depth-inhomogeneity of lifetime in silicon solar cells
del Canizo C, Tobias I, Lago-Aurrektoetxea R, Luque A |
| G526 - G531 |
Low temperature 4H-SiC epitaxial growth on 4H-SiC, (11(2)over-bar0) and (1(1)over-bar00)faces by organometallic chemical vapor deposition
Jeong JK, Hwang CS, Kim HJ |
| G532 - G534 |
An oxynitride gate dielectric for sub-30 angstrom complementary metal oxide semiconductor devices using precombustion of nitrous oxide
Shank SM, Clark WF, Hodge WJ |
| G535 - G538 |
The effect of plating current densities on self-annealing Behaviors of electroplated copper films
Chang SC, Shieh JM, Dai BT, Feng MS, Li YH |
| G539 - G542 |
Interface characteristics of SiO2/Si structure with high energy boron implantation
Unagami T |
| G543 - G549 |
Properties of silicon (111) and (100) surfaces etched choline solution
Sakaino K, Adachi S |
| G550 - G554 |
Effects of the addition of silane during carbonization on the epitaxy of 3C-SiC on Si
Burkland B, Xie ZY, Edgar JH, Ervin M, Chaudhuri J, Farsinivas S |
| H159 - H163 |
Comparison of photoelectrochromic devices with different layer configurations
Hauch A, Georg A, Krasovec UO, Orel B |
| A1107 - A1113 |
A model for the porous direct methanol fuel cells anode
Nordlund J, Lindbergh G |
| A1114 - A1120 |
Influence of crystallite size on the electrochemical properties of chemically synthesized stoichiometric LiNiO2
Chang CC, Kim JY, Kumta PN |
| A1121 - A1126 |
Interfacial stability between lithium and fumed silica-based composite electrolytes
Zhou J, Fedkiw PS, Khan SA |
| A1127 - A1131 |
Solid oxide fuel cells utilizing dimethyl ether fuel
Murray EP, Harris SJ, Jen HW |
| A1132 - A1135 |
Fabrication and testing of a doped lanthanum gallate electrolyte thin-film solid oxide fuel cell
Yan JW, Lu ZG, Jiang Y, Dong YL, Yu CY, Li WZ |
| A1136 - A1145 |
Electrochemical study of zinc-substituted nickel hydroxide
Tessier C, Faure C, Guerlou-Demourgues L, Denage C, Nabias G, Delmas C |
| A1146 - A1156 |
Dye sensitization of natural anatase crystals with a ruthenium-based dye
Fillinger A, Soltz D, Parkinson BA |
| A1157 - A1163 |
Factors influencing the layered to spinel-like phase transition in layered oxide cathodes
Choi S, Manthiram A |
| A1164 - A1170 |
Kinetic study of LiMn2O4 cathodes by in situ XRD with constant-current cycling and potential stepping
Eriksson T, Hjelm AK, Lindbergh G, Gustafsson T |
| A1171 - A1174 |
The nature of the interaction between polyaniline and 2,5-dimercapto-1,3,4-thiadiazole in electrochemical redox processes
Wang P |
| A1175 - A1183 |
Fabrication of high-performance NiOY2O3-ZrO2 cermet anodes of solid oxide fuel cells by ion impregnation
Jiang SP, Duan YY, Love JG |
| A1184 - A1189 |
Reducing carbon in LiFePO4/C composite electrodes to maximize specific energy, volumetric energy, and tap density
Chen ZH, Dahn JR |
| A1190 - A1195 |
Characterization of the lithium/oxygen organic electrolyte battery
Read J |
| A1196 - A1200 |
Investigation of the lithium couple on Pt, Al, and Hg electrodes in lithium imide-ethyl methyl sulfone
Park SH, Winnick J, Kohl PA |
| A1201 - A1207 |
Effect of electrolytes on performance of electrochemical capacitors based on poly[3-(3,4-difluorophenyl)thiophene]
Li L, Loveday DC, Mudigonda DSK, Ferraris JP |
| A1208 - A1211 |
Photovoltaically self-charging battery
Hauch A, Georg A, Krasovec UO, Orel B |
| A1212 - A1217 |
Rationalization of the low-potential reactivity of 3d-metal-based inorganic compounds toward Li
Poizot P, Laruelle S, Grugeon S, Tarascon JM |
| A1218 - A1223 |
Novel modified graphite as anode material for lithium-ion batteries
Pan QM, Guo KK, Wang LZ, Fang SB |
| A1224 - A1229 |
Electrochemical activity of hydrothermally synthesized Li-Ti-O cubic oxides toward Li insertion
Fattakhova D, Krtil P |
| A1230 - A1236 |
Microstructure of poly(vinylidene fluoride)-based polymer electrolyte and its effect on transport properties
Song JY, Cheng CL, Wang YY, Wan CC |
| A1237 - A1245 |
Metal oxide composites for lithium-ion battery anodes synthesized by the partial reduction process
Limthongkul P, Wang HF, Jud E, Chiang YM |
| A1246 - A1249 |
Local structure of dilute gallium ions in LiNi0.908Co0.085Ga0.003O2 cathode material - In situ X-ray absorption study
Balasubramanian M, McBreen J, Pandya K, Amine K |
| A1250 - A1254 |
Synthesis and electrochemical characteristics of Li-0.7[Ni1/6Mn5/6]O-2 cathode materials
Park KS, Park SH, Sun YK, Nahm KS, Yoon CS, Kim CK, Lee YS, Yoshio M |
