| 4967 - 4967 |
ISFM 2012 Special Edition
Liu YN |
| 4968 - 4973 |
An overview-Functional nanomaterials for lithium rechargeable batteries, supercapacitors, hydrogen storage, and fuel cells
Liu HK |
| 4974 - 4978 |
Phosphate adsorption on aluminum-coordinated functionalized macroporous-mesoporous silica: Surface structure and adsorption behavior
Huang WY, Li D, Zhu Y, Xu K, Li JQ, Han BP, Zhang YM |
| 4979 - 4983 |
Conducting polymer-doped polyprrrole as an effective cathode catalyst for Li-O-2 batteries
Zhang JQ, Sun B, Ahn HJ, Wang CY, Wang GX |
| 4984 - 4988 |
Facile and rapid synthesis of multiferroic TbMnO3 single crystalline
An XX, Deng JX, Chen J, Xing XR |
| 4989 - 4992 |
Aluminium doped ceria-zirconia supported palladium-alumina catalyst with high oxygen storage capacity and CO oxidation activity
Dong Q, Yin S, Guo CS, Wu XY, Kimura T, Sato T |
| 4993 - 4996 |
Microstructure and electrochemical properties of magnetron-sputtered LiCoO2/LiNiO2 multi-layer thin film electrode
Noh JP, Jung KT, Kwon TH, Cho GB, Huh SC, Choi BK, Kim KW, Nam TH |
| 4997 - 5002 |
Graphene oxide nanocomposites and their electrorheology
Zhang WL, Liu YD, Choi HJ |
| 5003 - 5007 |
Large-scale synthesis of high-content Fe nanotubes/nanorings with high magnetization by H-2 reduction process
Liu XL, Zheng MR, Lv YB, Fang J, Sow CH, Fan HM, Ding J |
| 5008 - 5012 |
Structural and electrical properties of Ce-0.75(Gd0.95-xSrxCa0.05)(0.25)O2-delta thick film electrolyte
Lee SH, Kim HJ, Kim SH, Kim HK, Lee SG, Yoon JR, Lee YH |
| 5013 - 5018 |
Hydrothermal synthesis, characterization and luminescent properties of GdPO4 center dot H2O:Tb3+ nanorods and nanobundles
Song HJ, Zhou LQ, Li L, Hong F, Luo XR |
| 5019 - 5025 |
Modeling of rate-dependent phase transition in bacterial flagellar filament
Wang XL, Sun QP |
| 5026 - 5032 |
Elastic modulus of rat whiskers-A key biomaterial in the rat whisker sensory system
Kan QH, Rajan R, Fu J, Kang GZ, Yan WY |
| 5033 - 5035 |
Transformation behavior of explosively welded TiNi/TiNi laminate after diffusion annealing and aging
Jiang XH, Jiang DQ, Zheng YJ, Cui LS |
| 5036 - 5039 |
Carbon nanotube based pressure sensor for flexible electronics
So HM, Sim JW, Kwon J, Yun J, Baik S, Chang WS |
| 5040 - 5044 |
Preparation of W-Sc2O3 targets and scandate cathodes with film prepared by pulsed laser deposition
Zhang XZ, Wang JS, Liu W, Tian T, Zhou ML |
| 5045 - 5048 |
Martensitic transformation behaviors of Ti-rich Ti-Ni alloy fibers fabricated by melt overflow
Kim YW, Jang SK |
| 5049 - 5052 |
In situ NiTi/Nb(Ti) composite
Jiang DQ, Cui LS, Jiang J, Zheng YJ |
| 5053 - 5057 |
Characterization of VPS-W coating layers on molybdenum after heat exposure
Cho GS, Choe KH, Choi SY |
| 5058 - 5063 |
Characterization and humidity sensing of ZnO/42 degrees YX LiTaO3 Love wave devices with ZnO nanorods
Guo YJ, Zhang J, Zhao C, Ma JY, Pang HF, Hu PA, Placido F, Gibson D, Zu XT, Zu HY, Fu YQ |
| 5064 - 5069 |
Martensitic transformation behavior in Ti-Ni-X (Ag, In, Sn, Sb, Te, Tl, Pb, Bi) ternary alloys
Jang JY, Chun SJ, Kim NS, Cho JW, Kim JH, Yeom JT, Kim JI, Nam TH |
| 5070 - 5075 |
Microstructure and martensitic transformation in Si-coated TiNi powders prepared by ball milling
Kim JH, Cho GB, Im YM, Chun BS, Kim YW, Nam TH |
| 5076 - 5079 |
Detection of various self-assembled monolayers by AlN-based film bulk acoustic resonator
Kim E, Choi YK, Song J, Lee J |
| 5080 - 5083 |
Resistive switching phenomena of tungsten nitride thin films with excellent CMOS compatibility
Hong SM, Kim HD, An HM, Kim TG |
| 5084 - 5087 |
Analysis of the energy distribution of interface traps related to tunnel oxide degradation using charge pumping techniques for 3D NAND flash applications
An HM, Kim HD, Kim TG |
| 5088 - 5092 |
Study of epitaxial lateral overgrowth of semipolar (11-22) GaN by using different SiO2 pattern sizes
Song KR, Lee JH, Han SH, Yi HR, Lee SN |
| 5093 - 5098 |
High roughness Ag back reflector on a metal underlayer for thin film solar cell applications
Lee YJ, Yeon CB, Yun SJ, Lee KS, Lim JW, Kim KB, Baek J |
| 5099 - 5104 |
Finite element computational modelling and experimental investigation of perforated NiTi plates under tension
Shariat BS, Liu YN, Rio G |
| 5105 - 5109 |
Differently mobile twin boundaries and magnetic shape memory effect in 10 M martensite of Ni-Mn-Ga
Heczko O, Kopecek J, Straka L, Seiner H |
| 5110 - 5114 |
Thermodynamic constitutive model for load-biased thermal cycling test of shape memory alloy
Young S, Nam TH |
| 5115 - 5120 |
Characteristics of ITO films with oxygen plasma treatment for thin film solar cell applications
Park YS, Kim E, Hong B, Lee J |
| 5121 - 5124 |
Dynamic impact behavior of Ni-rich and Ti-rich shape memory alloys
Young S, Jin DH, Chung DT, Kim JI, Kim YW, Nam TH |
| 5125 - 5130 |
Effect of room-temperature aging on shape memory characteristics of Ti-10Nb-10Zr-11Ta (at.%) alloy
Kim SJ, Kim JI |
| 5131 - 5135 |
Effect of pre-strain on shape memory characteristics in a Ti-17Nb-6Zr-1.0at.%O biomedical alloy
Kim H, Kim JI |
| 5136 - 5140 |
The effect of substrate temperature on Al-doped ZnO characteristics for organic thin film transistor applications
Park YS, Seo MS, Kim JS, Lee J |
