2471 - 2480 |
An nmr investigation of the dynamical characteristics of water absorbed in Nafion MacMillan B, Sharp AR, Armstrong RL |
2481 - 2485 |
Nmr relaxation in Nafion - the low temperature regime MacMillan B, Sharp AR, Armstrong RL |
2487 - 2492 |
Polyaniline dispersions 8. The control of particle morphology Stejskal J, Spirkova M, Riede A, Helmstedt M, Mokreva P, Prokes J |
2493 - 2500 |
Analysis of spider silk in native and supercontracted states using Raman spectroscopy Shao Z, Vollrath F, Sirichaisit J, Young RJ |
2501 - 2510 |
Flow light scattering studies of polymer coil conformation in solutions under shear: effect of solvent quality Lee EC, Muller SJ |
2511 - 2520 |
Composition effect on the core-shell morphology and mechanical properties of ternary polystyrene/styrene butadiene rubber polyethylene blends Luzinov I, Xi K, Pagnoulle C, Huynh-Ba G, Jerome R |
2521 - 2536 |
Evolution of a dispersed morphology from a co-continuous morphology immiscible polymer blends Lee JK, Han CD |
2537 - 2545 |
A small angle scattering study of dendrimer-copper sulfide nanocomposites Tan NCB, Balogh L, Trevino SF, Tomalia DA, Lin JS |
2547 - 2553 |
Non-uniform composition profiles in thin film polymeric nanofoams Fodor JS, Briber RM, Russell TP, Carter KR, Hedrick JL, Miller RD, Wong A |
2555 - 2560 |
Crystalline polymer on silica. Geometrical selectivity for azobenzenes through highly-oriented structure Ihara H, Sagawa T, Goto Y, Nagaoka S |
2561 - 2568 |
X-ray studies on the smectic polymorphism of chiral polysiloxanes with a sulfide substituent Gallot B, Galli G, Ceccanti A, Chiellini E |
2569 - 2586 |
Morphological characterisation of the crystalline structure of cold-drawn HDPE used as a model material for the environmental stress cracking (ESC) phenomenon Lagaron JM, Dixon NM, Reed W, Pastor JM, Kip BJ |
2587 - 2594 |
Influence of the morphology and of the supermolecular structure on the enzymatic degradation of bacterial poly(3-hydroxybutyrate) Canetti M, Urso M, Sadocco P |
2595 - 2603 |
Interactions of drugs and spill probes with hydrophobically modified polyelectrolyte hydrogels based on N-isopropylacrylamide Lowe TL, Virtanen J, Tenhu H |
2605 - 2617 |
Semi-empirical calculations and dielectric spectrometry of molecular units in PEEK Verot S, Battesti P, Perrier G |
2619 - 2624 |
Thermal micro ATR/FT-IR spectroscopic system for quantitative study of the molecular structure of poly(N-isopropylacrylamide) in water Lin SY, Chen KS, Liang RC |
2625 - 2629 |
Mechanical properties and structure of zone-drawn poly(p-phenylene vinylene) films Okuzaki H, Hirata Y, Kunugi T |
2631 - 2637 |
Influence of orientation and irradiation on stress relaxation of linear low-density polyethylene (LLDPE): a two-process model Djokovic V, Kostoski D, Galovic S, Dramicanin M, Kacarevic-Popovic Z |
2639 - 2648 |
Exploration of the space charge behaviour of polyethylene using measurements of thermally stimulated discharge currents coupled with the determination of space charge distributions by the thermal step method in hydrogenated poly(vinyl chloride) Guarrotxena N, Contreras J, Toureille A, Millan J |
2649 - 2657 |
Secondary dielectric relaxations in dried amorphous cellulose and dextran Montes H, Cavaille JY |
2659 - 2665 |
Windowing polarization: considerations for the study of the space charge relaxation in poly(methyl methacrylate) by thermally stimulated depolarization currents Mudarra M, Belana J, Canadas JC, Diego JA |
2667 - 2673 |
Miscibility and specific interactions in two polyelectrolyte/poly(2-ethyl-2-oxazoline) blend systems Goh SH, Lee SY, Zhou X, Tan KL |
2675 - 2679 |
Comparing dielectric measurements on poly(ethylene terephthalate) at constant heating rates with isothermal measurements Dionisio M, Alves NG, Mano JF |
2681 - 2685 |
Effects of precursor origins on water sorption behaviors of various aromatic polyimides in thin films Han H, Chung H, Gryte CC, Shin TJ, Ree M |
2687 - 2698 |
Interaction energies for blends of SAN with methyl methacrylate copolymers with ethyl acrylate and n-butyl acrylate Chu JH, Paul DR |
2699 - 2709 |
Nylon 6 as a modifier for maleated ethylene-propylene elastomers Okada O, Keskkula H, Paul DR |
2711 - 2718 |
Preparation and properties of injection-moulded blends of poly(vinyl chloride) and liquid crystal copolyester Meng YZ, Tjong SC |
2719 - 2726 |
Kinetic study of the thermal and oxidative degradations of poly(arylenether)s containing quinoline units Abate L, Bottino FA, Calanna S, Pollicino A |
2727 - 2735 |
Dilute solution behaviour of hexamethylene diisocyanate-based carboxylated polyurethanes and related ionomers in tetrahydrofuran Zagar E, Zigon M |
2737 - 2743 |
Effect of the functional group inhomogeneity of an in situ reactive compatibilizer on the morphology and rheological properties of immiscible polymer blends Kim JK, Yi DK, Jeon HK, Park CE |
2745 - 2757 |
Isotactic polypropylene/ethylene-co-propylene blends: effects of the copolymer microstructure and content on rheology, morphology and properties of injection moulded samples D'Orazio L, Mancarella C, Martuscelli E, Cecchin G, Corrieri R |
2759 - 2767 |
Unsaturated modified poly(vinyl alcohol). Crosslinking through double bonds Gimenez V, Reina JA, Mantecon A, Cadiz V |
2769 - 2777 |
The development of organized structures in polyethylene crystallized from a sheared melt, analyzed by WAXS and TEM Pople JA, Mitchell GR, Sutton SJ, Vaughan AS, Chai CK |
2779 - 2785 |
Absolute prediction of upper and lower critical solution temperatures in polymer/solvent systems based on corresponding state theory Wang F, Saeki S, Yamaguchi T |
2787 - 2795 |
Molecular modeling of the poling of piezoelectric polyimides Young JA, Farmer BL, Hinkley JA |
2797 - 2803 |
Diffusion of toluene and n-heptane in polyethylenes of different crystallinity Lutzow N, Tihminlioglu A, Danner RP, Duda JL, De Haan A, Warnier G, Zielinski JM |
2805 - 2812 |
Melting and crystallization of poly(ethylene-co-octene) measured by modulated dsc and temperature-resolved X-ray diffraction Androsch R |
2813 - 2820 |
Phase behaviour and borderline miscibility in blends of syndiotactic polystyrene with poly(vinyl methyl ether) Mandal TK, Woo EM |
2821 - 2828 |
Relaxation in partially cured samples of an epoxy resin and of the same resin modified with a carboxyl-terminated rubber Morancho JM, Salla JM |
2829 - 2836 |
A TEM study on polyoxymethylene edge-on lamellae crystallized epitaxially on alkali halides Fujita M, Tsuji M, Kohjiya S |
2837 - 2844 |
Liquid-liquid phase separation and its effect on crystallization in the extruded polypropylene/ethylene-propylene-rubber blend Lim SW, Lee KH, Lee CH |
2845 - 2857 |
Waxy polyethylenes from solution thermolysis of high density polyethylene: inert and H-donor solvent dilution effect Guy L, Fixari B |
2859 - 2862 |
Enzymatic degradation of poly(epsilon-caprolactone)/poly(DL-lactide) blends in phosphate buffer solution Gan ZH, Yu DH, Zhong ZY, Liang QZ, Jing XB |
2863 - 2867 |
Synthesis, characterization and nonlinear optical properties of copolymers of benzylaminofullerene with methyl methacrylate or ethyl methacrylate Lu ZH, Goh SH, Lee SY, Sun X, Ji W |
2869 - 2872 |
Rheological properties of particle suspensions in a polymeric liquid Choi HJ, Vinay SJ, Jhon MS |
2873 - 2873 |
Poly(amidoamine) hyperbranched systems: synthesis, structure and characterization (vol 40, pg 1279, 1999) Hobson LJ, Feast WJ |