4525 - 4532 |
Polymerization of ionic monomers in polar solvents: kinetics and mechanism of the free radical copolymerization of acrylamide/acrylic acid Rintoul I, Wandrey C |
4533 - 4543 |
Understanding the structure development in hyperbranched polymers prepared by oligomeric A(2)+B-3 approach: comparison of experimental results and simulations Unal S, Oguz C, Yilgor E, Gallivan M, Long TE, Yilgor I |
4544 - 4553 |
Thermal, morphological and rheological characterization of poly(acrylic acid-g-styrene) amphiphilic graft copolymers de la Fuente JL, Wilhelm M, Spiess HW, Madruga EL, Fernandez-Garcia M, Cerrada ML |
4554 - 4561 |
Solvent free vapour phase photografting of acrylamide onto poly(methyl methacrylate) Wirsen A, Sun H, Albertsson AC |
4562 - 4570 |
Rate of the activated anionic polymerisation of epsilon-caprolactam onto an isocyanate bearing polypropylene in the melt Hua GH, Li HX, Feng LF |
4571 - 4583 |
Comparison of photo-oxidative degradation of polyamide 6,6 films stabilized with HALS and CuCl2+KI mixtures Cerruti P, Lavorgna M, Carfagna C, Nicolais L |
4584 - 4595 |
Synthesis and characterization of bisester-amide segments of uniform and random length van der Schuur M, Feijen J, Gaymans RJ |
4596 - 4603 |
Composite magnetic particles: 2. Encapsulation of iron oxide by surfactant-free emulsion polymerization Pich A, Bhattacharya S, Ghosh A, Adler HJP |
4604 - 4613 |
Adhesion modification of polyolefin surfaces with sodium hypochlorite in acidic media Beholz LG, Aronson CL, Zand A |
4614 - 4618 |
High temperature resorcinol-based phthalonitrile polymer Keller TM, Dominguez DD |
4619 - 4626 |
Synthesis and properties of cross-linkable macromers from the selective substitution of poly(oxyalkylene)-amines and cyanuric chloride Chen YM, Huang BH, Lin JJ |
4627 - 4634 |
Direct synthesis of soluble and thermally stable poly(urethane-imide)s from a new triimide-dicarbonylazide Behniafar H, Haghighat S, Farzaneh S |
4635 - 4639 |
Exceptional chiroptical behavior near ceiling temperature in free radical polymerization of menthyl 2-acetamidoacrylates Tanaka H, Niwa M |
4640 - 4646 |
Synthesis and characterization of polyesters containing fluorescein dye units Uthirakumar P, Suh EK, Hong CH, Lee YS |
4647 - 4653 |
Synthesis and characterization of poly(terphenylenevinylene) derivative with electron withdrawing CN group and an electron donating alkoxy group Kim YH, Shin DC, Kwon SK |
4654 - 4663 |
Synthesis, optical and morphological characterization of soluble main chain 1,3,4-oxadiazole copolyarylethers - potential candidates for solar cells applications as electron acceptors Chochos CL, Govaris GK, Kakali F, Yiannoulis P, Kallitsis JK, Gregoriou VG |
4664 - 4669 |
'Stuffed' conducting polymers Winther-Jensen B, Chen J, West K, Wallace G |
4670 - 4675 |
ATR-FTIR and NMR spectroscopic studies on the structure of polymeric gel electrolytes for biomedical applications Licoccia S, Trombetta M, Capitani D, Proietti N, Romagnoli P, Di Vona ML |
4676 - 4685 |
Concurrent effect of microporosity and chemical structure on the equilibrium sorption properties of cellulose-based hydrogels Sannino A, Nicolais L |
4686 - 4694 |
Influence of the dispersion scale of reagents on the deformation of a reactive dispersed phase under shear flow Deyrail Y, Michel A, Cassagnau P |
4695 - 4703 |
Improvement of heat stability Of poly(L-lactic acid) by radiation-induced crosslinking Mitomo H, Kaneda A, Quynh TM, Nagasawa N, Yoshii F |
4704 - 4713 |
Network structure of spontaneously forming physically cross-link hydrogel composed of two-water soluble phospholipid polymers Nam K, Watanabe J, Ishihara K |
4714 - 4721 |
Self-assembly of C-60 containing poly(methyl methacrylate) in ethyl acetate/decalin mixtures solvent Ravi P, Dai S, Hong KM, Tam KC, Gan LH |
4722 - 4734 |
Effects of epoxy treatment of organoclay on structure, thermo-mechanical and transport properties of poly(ethylene terephthalate-co-ethylene naphthalate)/organoclay nanocomposites Lai MF, Kim JK |
4735 - 4742 |
Influence of molecular dipole on monoacrylate monomer reactivity Kilambi H, Beckel ER, Berchtold KA, Stansbury JW, Bowman CN |
4743 - 4752 |
Miscibility and viscoelastic properties of acrylic polyhedral oligomeric silsesquioxane-poly(methyl methacrylate) blends Kopesky ET, Haddad TS, McKinley GH, Cohen RE |
4753 - 4761 |
Compatibilizing effects of block copolymer mixed with immiscible polymer blends by solid-state shear pulverization: Stabilizing the dispersed phase to static coarsening Tao Y, Lebovitz AH, Torkelson JM |
4762 - 4775 |
Reorganization and improvement of bulk polymers by processing with their cyclodextrin inclusion compounds Uyar T, Rusa CC, Hunt MA, Aslan E, Hacaloglu J, Tonelli AE |
4776 - 4788 |
Dynamic colloidal processes in waterborne two-component polyurethanes and their effects on solution and film morphology Otts DB, Pereira KJ, Jarret WL, Urban MW |
4789 - 4798 |
Thermal, optical, electrochemical properties and conductivity of trans and cis-poly(1-ethynylpyrene): a comparative investigation Rivera E, Aguilar-Martinez M, Teran G, Flores RF, Bautista-Martinez JA |
4799 - 4810 |
Electrospinning of linear homopolymers of poly(methyl methacrylate): exploring relationships between fiber formation, viscosity, molecular weight and concentration in a good solvent Gupta P, Elkins C, Long TE, Wilkes GL |
4811 - 4826 |
Structural hierarchy developed in injection molding of nylon 6/clay/carbon black nanocomposites Konishi Y, Cakmak M |
4827 - 4838 |
Finite strain behavior of poly(ethylene terephthalate) (PET) and poly(ethylene terephthalate)-glycol (PETG) Dupaix RB, Boyce MC |
4839 - 4844 |
Self-diffusion of poly(p-phenyleneethynylene)s in dilute solution determined by pulsed-field-gradient NMR Zhao TJ, Beckham HW, Ricks HL, Bunz UHF |
4845 - 4852 |
Glass-transition temperatures for soft-contact-lens materials. Dependence on water content Fornasiero F, Ung M, Radke CJ, Prausnitz JM |
4853 - 4867 |
Formation of water-resistant hyaluronic acid nanofibers by blowing-assisted electro-spinning and non-toxic post treatments Wang XF, Um IC, Fang DF, Okamoto A, Hsiao BS, Chu B |
4868 - 4875 |
Morphology of an asymmetric ethyleneoxide-butadiene di-block copolymer in bulk and thin films Lambreva DM, Opitz R, Reiter G, Frederik PM, de Jeu WH |
4876 - 4881 |
Chlorosulfonated polypropylene: preparation and its application as a coupling agent in polypropylene-clay nanocomposites Kotek J, Kelnar I, Studenovsky M, Baldrian J |
4882 - 4890 |
Single and mixed gas diffusion through polyethylene films Pino M, Duckett RA, Ward IM |
4891 - 4898 |
Morphology, thermal, and viscoelastic properties of poly(glycidyl methacrylate-co-methyl methacrylate)-based nanocomposites with various organo-modified Someya Y, Shibata M |
4899 - 4908 |
Anisotropic thermal expansion in polypropylene/poly(ethylene-co-octene) binary blends: influence of arrays of elastomer domains Ono M, Washiyama J, Nakajima K, Nishi T |
4909 - 4916 |
Performance improvement of polybenzoxazine by alloying with polyimide: effect of preparation method on the properties Takeichi T, Guo Y, Rimdusit S |
4917 - 4927 |
Spherulite growth of L-lactide copolymers: Effects of tacticity and comonomers Tsuji H, Tezuka Y, Saha SK, Suzuki M, Itsuno S |
4928 - 4937 |
Modeling the rheology of gelatin gels for finite deformations. Part 1. Elastic rheological model Ottone ML, Deiber JA |
4938 - 4949 |
Modeling the rheology of gelatin gels for finite deformations. Part 2. Viscoelastic solid model Ottone ML, Peirotti MB, Deiber JA |
4950 - 4957 |
Theoretical analysis on the geometries and electronic structures of coplanar conjugated poly(azomethine)s Liu CL, Tsai FC, Chang CC, Hsieh KH, Lin JL, Chen WC |
4958 - 4966 |
Charge density threshold for LbL self-assembly and small molecule diffusion in polyelectrolyte multilayer films Sun QL, Tong Z, Wang CY, Ren BY, Liu XX, Zeng F |
4967 - 4970 |
Light emission in phase separated conjugated and non-conjugated polymer blends Chou HL, Hsu SY, Wei PK |
4971 - 4978 |
Second-order nonlinear optical property of polyphosphazenes containing charge-transporting agents and indole-based chromophore Li Z, Gong W, Qin JG, Yang Z, Ye C |
4979 - 4985 |
A comparative study of porous scaffolds with cubic and spherical macropores Zhang JC, Wu LB, Jing DY, Ding JD |