| 3 - 8 |
UV-cured silicone composites obtained via hydrosilation and in-situ generation of inorganic particles
Marchi S, Sangermano M, Meier P, Kornmann X |
| 9 - 17 |
Improving the stability of polylactic acid foams by interfacially adsorbed particles
Lobos J, Iasella S, Rodriguez-Perez MA, Velankar SS |
| 18 - 26 |
Role of salt on adhesion of an epoxy/aluminum (oxide) interface in aqueous environments
Tan KT, White CC, Hunston D, Gorham JM, Imburgia MJ, Forster AM, Vogt BD |
| 27 - 35 |
Composites based on (ethylene-propylene) copolymer and olive solid waste: Rheological, thermal, mechanical, and morphological behaviors
Khemakhem M, Jaziri M |
| 36 - 43 |
Inverse gas chromatography study of polyvinylacetate-solvent and polyethylene-solvent systems
Camacho J, Diez E, Gomez L, Ovejero G |
| 44 - 50 |
Synthesis and properties of copolymers of poly(ether ether sulfone)/semiaromatic polyamides (PEES/PA)
Li Y, Zhang G, Wang XJ, Li ZM, Yang J |
| 51 - 60 |
Effect of selective localization of carbon nanotubes in pa6 dispersed phase of PP/PA6 blends on the morphology evolution with time, part 2: Relaxation of deformed droplets after cessation of flow
Gooneie A, Nazockdast H, Shahsavan F |
| 61 - 70 |
Investigation of phase formation in piezoelectric response of electrospun polyvinylidene fluoride nanofibers: LiCl additive and increasing fibers tension
Mokhtari F, Shamshirsaz M, Latifi M |
| 71 - 78 |
Synthesis of polypropylene/cellulosic fiber composites using Ziegler-Natta catalyst by in situ polymerization
Marques MVD, Lunz JN, Oliveira PL |
| 79 - 86 |
Point load effect on the buried polyolefin pipes lifetime
Majer Z, Hutar P, Frank A, Sevcik M, Zouhar M, Pinter G, Nahlik L |
| 87 - 96 |
The effects of microwave heating on the kinetics of isothermal dehydration of equilibrium swollen poly(acrylic-co-methacrylic acid) hydrogel
Jovanovic J, Potkonjak B, Adnadjevic T, Adnadjevic B |
| 97 - 102 |
Damping elastomer with broad temperature range based on irregular networks formed by end-linking of hydroxyl-terminated poly(dimethylsiloxane)
Li ZP, Lu X, Tao G, Guo JH, Jiang HW |
| 103 - 117 |
Relationship between brightness and roughness of polypropylene abraded surfaces
Van Gorp A, Bigerelle M, Najjar D |
| 118 - 124 |
Toward the prediction of porous membrane permeability from morphological data
Nurra C, Pitol L, Carraud R, Pertuz S, Puig D, Garcia MA, Salvado J, Torras C |
