| 2065 - 2071 |
Rheology of concentrated solutions of hyperbranched polyesters
Andrady AL, Nunez CM, Chiou BS, Khan SA |
| 2072 - 2083 |
A lithium ionomer of poly(ethylene-co-methacrylic acid) copolymer as compatibilizer for blends of poly(ethylene terephthalate) and high density polyethylene
Retolaza A, Eguiazabal JI, Nazabal J |
| 2084 - 2093 |
Transient compositional effects from feeders in a starved flow modular co-rotating twin-screw extruder
Kim EK, White JL |
| 2094 - 2106 |
Continuous microcellular polystyrene foam extrusion with supercritical CO2
Han XM, Koelling KW, Tomasko DL, Lee LJ |
| 2107 - 2119 |
Linear viscoelastic and transient behavior of polypropylene and ethylene vinyl acetate blends: An evaluation of the linear palierne and a nonlinear viscoelastic model for dispersive mixtures
Tyagi S, Ghosh AK, Montanari P, Peters GWM, Meijer HEH |
| 2120 - 2136 |
Steady and transient flow of a non-Newtonian chemically reactive fluid in a twin-screw extruder
Zhu W, Jaluria Y |
| 2137 - 2145 |
Melting behavior, crystallization kinetics and morphology of random copolyesters of poly(2-hydroxyethoxybenzoate) with epsilon-caprolactone
Finelli L, Siracusa V, Lotti N, Munari A |
| 2146 - 2155 |
Toughening mechanisms in annealed high density polyethylene under impact
Ravi S, Takahashi K |
| 2156 - 2164 |
Effect of blending sequence on the microstructure and properties of PBT/EVA-g-MAH/organoclay ternary nanocomposites
Li XC, Park HM, Lee JO, Ha CS |
| 2165 - 2171 |
Microwave absorbing properties of carbon black/silicone rubber blend
Kwon SK, Ahn JM, Kim GH, Chun CH, Hwang JS, Lee JH |
| 2172 - 2181 |
Sequential injection molding of thermoplastic polymers. Analysis of processing parameters for optimal bonding conditions
Carella AR, Alonso C, Merino JC, Pastor JM |
| 2182 - 2192 |
Development of a two-stage, dual-Arrhenius rheology model for a high-performance phenylethynyl-terminated poly(etherimide)
Bullions TA, McGrath JE, Loos AC |
| 2193 - 2201 |
Influence of additives on the crystallization kinetics of semicrystalline polymers. II: Selective polymer-additive interaction in poly(vinylidene difluoride)-poly(methylmethacrylate) blends
Pillin I, Pimbert S, Levesque G |
| 2202 - 2212 |
Tear strength of ductile polyolefin films
Chang AC, Inge T, Tau L, Hiltner A, Baer E |
| 2213 - 2221 |
Influence of side-chain structures on the viscoelasticity and elongation viscosity of polyethylene melts
Lin GG, Shih HH, Chai PC, Hsu SJ |
| 2222 - 2233 |
Influence of the processing conditions on a two-phase reactive blend system: EVA/PP thermoplastic vulcanizate
Joubert C, Cassagnau P, Michel A, Choplin L |
| 2234 - 2245 |
Measurement and prediction of LDPE/CO2 solution viscosity
Areerat S, Nagata T, Ohshima M |
| 2246 - 2272 |
Numerical prediction of residual stresses and birefringence in injection/compression molded center-gated disk. Part 1: Basic modeling and results for injection
Lee YB, Kwon TH, Yoon K |
| 2273 - 2292 |
Numerical prediction of residual stresses and birefringence in injection/compression molded center-gated disk. Part II: Effects of processing conditions
Lee YB, Kwon TH, Yoon K |
