| 2325 - 2325 |
Preamble
Ajji A |
| 2326 - 2334 |
Orientation of LCP blown film with rotating dies
Lusignea RW |
| 2335 - 2348 |
The stress optical behavior of PET fibers and films
Ward IM, Bleackley M, Taylor DJR, Cail JI, Stepto RFT |
| 2349 - 2357 |
On-line measurement of orientation development in the high-speed melt spinning process
Kikutani T, Nakao K, Takarada W, Ito H |
| 2358 - 2365 |
Effect of structure on the deformation and failure of oriented polymer films
Samuels RJ |
| 2366 - 2376 |
Constitutive viscoplastic behavior of amorphous PET during plane-strain tensile stretching
Vigny M, Aubert A, Hiver JM, Aboulfaraj M, G'Sell C |
| 2377 - 2388 |
The effects of roll drawing on the structure and properties of oriented poly(ethylene terephthalate)
Matthews RG, Ajji A, Dumoulin MM, Prud'homme RE |
| 2389 - 2394 |
Characterization of the orientation in synthetic polymer sheets using far-infrared radiation
Drouin B, Gagnon R |
| 2395 - 2402 |
Fiber-forming properties of polymer mixture melts and properties of fibers on their basis
Tsebrenko MV, Rezanova NM, Tsebrenko IA |
| 2403 - 2418 |
Physical and microstructural effects of heat setting in polyester films
Greener J, Tsou AH, Blanton TN |
| 2419 - 2430 |
Orientation and crystallization in poly(ethylene terephthalate) during drawing at high temperatures and strain rates
Salem DR |
| 2431 - 2444 |
Influence of interchange reactions on the crystallization and melting behavior of nylon 6,6 blended with other nylons
Walia PS, Gupta RK, Kiang CT |
| 2445 - 2460 |
Polymer toughness and impact resistance
Perkins WG |
| 2461 - 2474 |
An investigation of shear-induced mixing in the PSAN/PMMA blend
Papathanasiou TD, Higgins JS, Soontaranun W |
| 2475 - 2481 |
Properties of poly(ethylene terephthalate)/poly(ethylene naphthalate) blends
Rwei SP |
| 2482 - 2486 |
Polypyrrole conductive polymer characteristics as an optical display device
Al-Attar HA, Al-Kabbi AS, Faris FA |
| 2487 - 2497 |
Convective and radiant (IR) curing of bulk and waterborne epoxy coatings as thin layers. Part II: Infrared curing
Blanc D, Laurent P, Andrieu J, Gerard JF |
| 2498 - 2504 |
A mechanism for extrusion instabilities in polymer melts
Fyrillas M, Georgiou G, Vlassopoulos D, Hatzikiriakos S |
